Wes Lindsey
New member
- Joined
- Dec 14, 2010
- Messages
- 7
- Tractor
- 850, 1250 , 2240 & 4020 John Deere
Anyone have an idea where a water pump can be found other than a Deere dealer?
Thanks'
Thanks'
1250 Water Pump
- Thread starter Wes Lindsey
- Start date
- Views: 5245
pilot-werx
Gold Member
I found one on eBay for my 455 and had the bad one rebuilt to have as a spare...
OP
Wes Lindsey
New member
- Joined
- Dec 14, 2010
- Messages
- 7
- Tractor
- 850, 1250 , 2240 & 4020 John Deere
Thanks' for the reply. I have searched e-bay high and low, as well as a few other places:confused2:.These things are more scarce than hen's teeth. Where did you have your rebuilt?
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,566
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:welcome:
What does Deere want for one?
What is worn....the bearing, impeller, housing, or something else?
What does Deere want for one?
What is worn....the bearing, impeller, housing, or something else?
OP
Wes Lindsey
New member
- Joined
- Dec 14, 2010
- Messages
- 7
- Tractor
- 850, 1250 , 2240 & 4020 John Deere
John Deere wants' $400.00 for one.
I haven't gotten it apart yet the countersunk screws are frozen and I'm soaking them in penatrant and going after an inpact driver to see if I can get them out. From the way it acts I think the impellor is either rotted off or slipping on the shaft because I'm getting 0 circulation of water. I know one thing for sure this will be my last 1250 to rebuild. Parts are entirely too hard to find and way too high when you find them.
I haven't gotten it apart yet the countersunk screws are frozen and I'm soaking them in penatrant and going after an inpact driver to see if I can get them out. From the way it acts I think the impellor is either rotted off or slipping on the shaft because I'm getting 0 circulation of water. I know one thing for sure this will be my last 1250 to rebuild. Parts are entirely too hard to find and way too high when you find them.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,566
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
OP
Wes Lindsey
New member
- Joined
- Dec 14, 2010
- Messages
- 7
- Tractor
- 850, 1250 , 2240 & 4020 John Deere
Thanks' Beenthere!! Could you e-mail me that exploded view and parts list please? I cannot get to view properly off of the forum. Also is that a John Deere parts list or Yanmar?
E-mail = ernest.lindsey1@yahoo.com
Thanks,
Wes
E-mail = ernest.lindsey1@yahoo.com
Thanks,
Wes
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,566
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Will do that.
It comes from jdparts which you can get at, with a free registration.
Googling the parts number for the pump, CH16845 comes up with a few hits.
One is
REBUILT 00184 WATER PUMP WATER PUMP [JOHN DEERE] - - It's Free! : A & T Parts & Rebuilders
with an 800 748-9567 number for price quote. (and doubt it is FREE )
It comes from jdparts which you can get at, with a free registration.
Googling the parts number for the pump, CH16845 comes up with a few hits.
One is
REBUILT 00184 WATER PUMP WATER PUMP [JOHN DEERE] - - It's Free! : A & T Parts & Rebuilders
with an 800 748-9567 number for price quote. (and doubt it is FREE
)
OP
Wes Lindsey
New member
- Joined
- Dec 14, 2010
- Messages
- 7
- Tractor
- 850, 1250 , 2240 & 4020 John Deere
Beenthere Many thanks!!!!!!. I'll call them Monday and see what they have. I have just about given up on this tractor and just about broke the bank for sure.
I had the injectors rebuilt and almost had to take out a loan on the farm to get them back. The guy that rebuilt them for me said that those were the highest priced tips/ nozzles he had ever seem and he has been in the business for over 30 years.
I had the injectors rebuilt and almost had to take out a loan on the farm to get them back. The guy that rebuilt them for me said that those were the highest priced tips/ nozzles he had ever seem and he has been in the business for over 30 years.
