1220 cub cadet

/ 1220 cub cadet #1  

dallas cofer

New member
Joined
May 3, 2010
Messages
1
I have a 1220 cadet hydro and like many the pump has got very weak so was just wondering what other cadet rear ends will fit this mower if I can find a doner mower to change the whole rear end. would like to keep the hydro but would go to a manual rear end. It is a early production mower and has the eaton pump. Have had the hydro apart and cleaned it good and put new fluid in it but didn't help much if any. There didn't appear to be any wear or damage in the pump was just wondering if the springs could be loosing their tension after they warm up and not forcing the balls out against the race resulting in poor pressure and therefore causing it to be weak. Any help would be greatly appreciated. I am a new member here and located in central Kentucky. Thanks folks.
 

Marketplace Items

New/Unused Mini Skid Steer Mounting Plate (A61166)
New/Unused Mini...
2023 Takeuchi TL6R Compact Track Loader Skid Steer w Low Hours (A63118)
2023 Takeuchi TL6R...
2016 Deere 180G (A60462)
2016 Deere 180G...
2020 John Deere 333G High Flow Compact Track Loader Skid Steer (A61567)
2020 John Deere...
(24) Ratchet Tie Down with Toolbox (A61166)
(24) Ratchet Tie...
2023 John Deere Z930M Zero Turn (A63116)
2023 John Deere...
 
Top