I just bought a Yanmar ym2000 and was told by the previous owner that it would take about 15 min to get it started and that it was getting air in the fuel. I bled the fuel system, hooked battery up to jumper cables and cranked on it for a while with no luck. Since then I tried multiple times to...
I'm interested in what other owners have done when it's time to replace the rear wheels on their Yanmar YM2000 tractor. My tire size is 9.5/9-24. I think this is an antiquated size system and in today's language will be a 9.5"x24" tire.
A general search reveals that I purchase a Petlas TA 60...
I have a Yanmar YM2000. When I put the PTO into the Neutral position, the tractor bogs down and will stall when you let the clutch out. The PTO works fine in 1, 2, & 3.
I noticed the PTO lever pivots on (what appears to be) the same rod as the differential lock pedal. With the tractor off...
Have been scanning hard starting threads here.
Have a Yanmar YM2000BD.
It seems hard to start most of the time except when warmed up.
I figured at first Thermostart was bad, which it was, I致e since fixed that with a new one, and it works well!
Ambiernt temperatures here are high 70s and up...
I changed the hydraulic fluid in my Yanmar YM2000 and the lift quit working,,was working before I changed it,,is there anything I have to do like blled lines,,,,any help appreciated,, fluid is 303 from local farm store
I recently replaced the damaged/missing dummy lights on my YM2000. I also replaced all of the sending units at the same time.
Everything has been going OAK for the last 4 weeks while planting a garden.
This evening I started it up and the oil light stayed on. I checked the oil level and it was...
I recently purchased a YM2000 that was missing the factory fuel filter. Instead of buying a factory filter I bought a Parker Racor 120AT filter. It cost a little more but I was hoping to get an American made filter and better filtration. I am a bit skeptical if it is actually made in the USA...
I have a ym2000 that my buddy uses to bush hog my house in maryland as I was transferred out of the state last year it over heated an he took it to the shop. They said it had a cracked head. I bought a new head and necessary parts to replace and had a friend replace. He started it up this week...
Changed out the fuel filter on my Yanmar YM2000 and I can't get it to start.
I refilled the plastic fuel bowl after I replaced the filter. When I fired it up it ran for several seconds died and would not restart.
Per info I located online I then opened the pair of bleeder screws located above...
i am new to the forum and will probably get lost. i recently acquired a green YM2000 tractor that has been setting for several years. the previous owner parked it and when he went to start it it would not start. it set for several years before i bought it. cleaned the fuel tank, installed new...
I recently acquired a Yanmar ym2000 from a friend of mine, he stated that it was running but sat for a yr or so . I attempted to get it started with no luck. Initially the fuel filter housing was low, I cracked the filter and it drew fuel in, I then cracked the discharge lines from the fuel...
I have a Yanmar YM2000 Diesel - LOVE IT!! but I can't figure out if it has a glow plug or not - it has the "glow plug" position on the switch! It runs AWESOME!!
Also, how would I find out how old it is - the number on the side says ym2000-04811
Here is a video ...
I have a Yanmar YM2000 Diesel - LOVE IT!! but I can't figure out if it has a glow plug or not - it has the "glow plug" position on the switch! It runs AWESOME!!
Also, how would I find out how old it is - the number on the side says ym2000-04811
Here is a video of the tractor...
Hello all,
Im a new member, I just recently bought a Yanmar ym2000 and just trying to get everything in tip top shape on the tractor. The only thing I can really see at this moment is that the pro shift lever sticks and the decompression release handle is stuck. It shifts great , motor runs...
While diagnosing what I thought was a fuel problem on my YM2000, I removed the inner workings of the injection pump (a major mistake as I've come to realize). I found and fixed the real problem, which was a bad ground and bushings worn out on the starter and was able to get the tractor fired...
I have a YM2000 that I recently bought and am trying to start. The engine spins quickly with the decompression on. It occasionally puffs smoke. When I move the decompression off the engine spins much slower but does not start. The fuel tank was nearly dry so I added fresh fuel. What is the best...
Anyone know where I can get a free copy of a owners manual for a Yanmar YM2000? I just bought the tractor my first ever tractor) and would like a little more info on operation etc. Thx
I have a yanmar ym 2000 I have removed the shifter to check my gears bc high is popping out. Now I can't get my forks installed right, I need help with the proper position the forks are supposed to be with the gears please help. Illustration, link, please help me just get it back together I can...
My YM2000 started leaking fluid on the left rear wheel outer seal at hub. I found my rear tire was loose :eek:. I took off tire , pulled hub, took off the 4 bolts (5 including safety chain eye bolt) & opened up the outer bearing case . I found my Axle Seal that goes in the outer bearing plate...
This is my first experience owning a tractor on my own. Bought YM2000 on consignment and found out after mowing a couple of time the rear axle seal needed replacing. With the help of a friend, have taken the wheel off but having hard time going from there. What's next
I just closed a deal on a Yanmar YM2000 w/loader. Can anyone share their experiences with this tractor? I've heard a lot of good things about Yanmar tractors. The dealer was RCO tractors in Austin, TX - Good Guys
Hi I am new to the forum and not really know English, I come from Polish and need help in dismantling YM2000 Yanmar water pumps.
Some time ago bearings in the pump started beeping and I want to mention them, just do not know how?
Maybe someone undressed and will share how to dismantle?
Do I need...
I have a YM2000 grey (the pea green model) and have some questions about remote hydraulics. I have a Bush hog FEL QT 1846. I understand I can use the power beyond port from the FEL control valve to setup my remotes. I have searched and read many post but have a few unanswered questions.
1. Do I...
Hi folks, Merry Christmass to one and all.
I'm about to buy a new Rad cap for my Yanny.
The one on it is a non- return variety [wrong, I know].
It has japanese script on it and is stamped 0.9.
I have checked the Hoye site and my manual and done a search here but can't find a reference to the...
I have a YM2000 and the radiator overflow tank continues to fill up after successive warm up / cool down cycles and eventually overflows. I have replaced the radiator cap twice with a 13 Lb cap and continue to have an overflow problem. When mowing this summer my temp gauge only reaches 190 to...
Ordered a Radiator for my YM2000B from Hoye but it is shorter than my old one. Hoye had the part listed as a YM2000. Is there a difference in a 2000 and 2000B in the radiator?
Anyone ever send anything back to these folks?
I am trying to find a starter for a Yanmar 2000. I have read where it is the same starter that is in a nissan 83 pickup, but the poster didnt put the engine size on his post. I also read where the starter is the Hitachi S104-114 but have been unable to locate one. Any help would be appreciated
Leaky radiator hose will require replacement. I have bought the new one and getting ready. Any special tricks or things I need to remove to make this go smoothly. Real tight looking area. Guess I'll just start pulling things off until I can reach it!
I purchased my first tractor about a year ago - a YM2000. After I finally purchased an operator manual for the tractor, I noted a reference to a radiator sub-tank and also to a radiator screen.
After purchasing and receiving the radiator sub-tank, I could not find a description or picture of...