I recently bought a Yanmar 186D which overall appears to be in good shape. Original paint, no signs of heavy wear or abuse, etc.
However, it is very difficult to start. Worse on a cold day but still difficult on a day in the 60s.
Symptoms:
- requires multiple cycles with the thermostart and...
I recently replaced my Hydraulic pump on my 186D. (external one that pressurizes loader and 3 point) I cleaned out all the fluid and refilled. Changed spin on filter. New pump makes a slight noise. It operated the loader and 3 point ok, but an hour later it sheared the woodruff key on the pump...
Had a "big" snow (7 inches!) here in DC yesterday and the single-stick bucket control handle decided to snap before I even moved, leaving me to run my Wheelhorse 418 to plow it all out.
I'm not a hydraulics whiz, so I need some help with getting a new control block installed.
Currently on the...
I was running the tractor a couple of weeks ago (tractor is located on property about 60 miles away). When it quit running it was a gradual stop running. Had the throttle opened to max and it was like I was decreasing the throttle until the point it quit running. I was at the property today and...
Hello,
Our YM186D has some issues, the most important: the shaft between the clutch and the gearbox is broken.
It has happened before, a mechanic has welded it previous time, now it is broken again.
Im really surprised how in the world its possible to break such shaft.
Does anyone have an idea...
Hey all just bought a Yanmar 186D with a KMW loader. Model is K650.
Tractor has a PH8A filter remote mounted for what appears to be the hydraulic system.
I know that a PH8A is a ford motor filter. Is this the proper type of filter for this application?
Here's some pictures. thanks
Hi we have a leak at joint from gearbox (front) where it come off to the prop shaft CV joint. Does any body have any exploded diagram showing seals for these parts ?
Are work shop and parts manuals available to down load free - can't find any.
Thanks
HI Everyone
I just picked up a 186d and i am having a hard time getting it to start . It is about 20 degrees out. In the manual it says to pull the decompression rod out ,thermostart for 15 to 20 seconds, Then crank the engine until it starts. There is no way the engine will start with the...
Hey guys... long time lurker, first time poster.
I have a 186D thats giving me problems. The 3 point doesn't like to lift a load when warm. I wanted to go through everything and got to what I though would be the filter screen. I removed the 3 bolts, pulled the screen cover and can't get the...
Hi i have just purchased a set of front tyres for my yanmar tractor, the tyre size is 6-12 but I noticed that I've been sold a tyre that is 6.00 12, I made a note to the guy and he said its the same tyre but they appear to be a taller tyre, can I run this tyre or will it cause me issues? Thanks...
Anyone know where i can get a clutch shaft (goes for the pilot bushing back to the transmission shaft) for a yanmar 186d. The splines on mine are stripped off and i haven't had any luck finding the part. If anyone has any suggestion i would greatly appreciate it.
Thanks
Mike
I am the original owner of a Yanmar 186D and for the first time I have a problem without an easy solution. I waited too long to replace bad u-joints in the propeller shaft (Yanmar #194441-13303) going to the front axle and, as a result, the splines on the rear yoke are stripped. I'd like to find...
Just thought I'd throw out a quick introduction, I am a complete newbie when it comes to tractors. I grew up around heavy equipment and for a while I had a little mini excavator (Yanmar YB281). A while ago I started looking at getting a little tractor to do some projects with and started looking...
I have a 186D with front end loader it's plumbed into the rear as in the pic when I use the loader it makes a load humming noise like its starving for oil, when I engage the lever for the rear 3pt it squeals.
I'm new to the tractor and don't know anything about tractors as this is my first...
Hi my names Daniel this is my first post on this great forum,I'm a new owner of a yanmar 186d tractor that I have just brought to use on my hobby acreage that me and my family hope to live on one day.
It has a fel and a backhoe attachment and needs a fair bit of work to get it to my standard...
hi all i have a question was wondering if someone can help, i found this great yanmar tractor and i was wondering if it would team up well with a blecavator bv130 tiller - stone burier atachment- http://www.thelawnmowerman.ie/PDFS/blecavator.pdf now the hp recomended is 20-30 hp and the unit...
Hi Guys,
I'm thinking about buying a 1983 Yanmar 186D 18 HP diesel tractor to work on my small farm. This one has a rebuilt engine with about 100 hours on it, a loader, scraper box and rock rake. The seller is willing to drive 400 miles round trip to deliver it to my land, which is important...
Hi Guys,
I'm thinking about buying a 1983 Yanmar 186D 18 HP diesel tractor to work on my small farm. This one has a rebuilt engine with about 100 hours on it, a loader, scraper box and rock rake. The seller is willing to drive 400 miles round trip to deliver it to my land, which is important...
Hi all, here was my weekend project. Started out as a pile of new steel, around $250 dollars worth plus a couple of pieces I had around. I have a pile left over, probably enough for another set so I may make a set to sell. I designed the forks to lift full capacity of loader (650lbs) at the tips...
I after the part number for the air filter on my yanmar 186d I ordered a set of filters and the air filter sent was a balwin pa 1690-fn which is too big
I have a Yanmar tractor 186D 4wd mid 80s with yl 650 loader for sale for 4500.00
Runs perfect ready to work for you
367 hrs
Easy shift
New battery
9 forward 3 reverse
I've had the tractor for 3 years a very good tractor
Not sure how to post pics on here yet but Contact James @ 832-401-6682...
I have a Yanmar tractor 186D 4wd mid 80s with yl 650 loader for sale for 4500.00
Runs perfect ready to work for you
367 hrs
Easy shift
New battery
9 forward 3 reverse
I've had the tractor for 3 years a very good tractor
Not sure how to post pics on here yet but Contact James @ 832-401-6682...
I recently purchased a Yanmar 186D. It has a 15" rim with car tires on the front. This only allows for wide turns. What size wheels and tires are correct for this tractor?
I have been looking at the HF 5 foot finish mower for a while at the Harbor Freight web site. 5 Ft. 3-Point PTO Finishing Mower At 600 bucks, it looked like a good deal, but with a 100 buck shipping charge, was a little out of my budget and did not need one until spring anyway. About a week...
Bought a yanmar 186d earlier this week and played with it today. Seems to have a problem with the transmission. When I put it in reverse to back out of shop.....it didn't seem to engage for serveral seconds.....then it slipped into gear. Same problem when I tried the forward gears. After it...
does anyone know a website where i can get a breakdown diagram of a front axle for for a yanmar 186d? it's leaking grease at the hub and i need to see what goes where. thanks
I recently bought a yanmar 186d.....very nice little tractor. I noticed when I throttle up in higher gears.....some smoke is generated. Seems to be fine when running at lower rpm. Smoke isn't bad.....just a little more than I expected. Is this normal. I plan to change oil and filter and air...
I am in need of a hood for my Yanmar 186D. It is red with white head light trim. If any one has any idea where I can find one please let me know. I am rebuilding the tractor. Thanks
Hello,
I just looked at a Yanmar 186D today. says it has 991 hours on it. he says he is the second owner. he has the owners manual, service manual, hydrolic oil heater, and some extra filters. as you can see from the pictures it has turf tires on it. the seat is a boat seat. the hood has...
Can anyone point me at an "Owners Manual" for Yanmar 186D, Please?
I have the service manual but the operators has a great deal mor info I am told :-)
Thank you in advance
Tassie Mike
Ok folks, be honest and despite the vague question give your best shot at fairly pricing my Yanmar 186D tractor with the goodies. I'm trying to price it based on fair market value, the condition, the accessories, and the cost to replace it. Here are the specs:
Yanmar 186D tractor
- 4 wheel...