yanmar 1500d

I had my loader cylinders rebuit and I didn’t mark my hoses because i thought it would be easy to tell which hose went where, but now realize the hoses are not right. Is there a diagram that shows which hose goes to each port on the cylinders?

Posted this in the vintage forum but thought I’d post here too. Went and looked at this little tractor today. Guy also has it listed in FB FIR ABOUT $500 less. everything seemed to work but guy didn’t know much anything about history of tractor. He just buys to resell (not a dealer, more of a...

Went and looked at this little tractor today. Guy also has it listed in FB FIR ABOUT $500 less. everything seemed to work but guy didn’t know much anything about history of tractor. He just buys to resell (not a dealer, more of a side job). he replaced the fluids and front axle seals but beyond...

My yanmar has never giving me trouble starting but now just cranks but doesn't start. Is there a fuse or a magneto or something that causes fire to start.

I need the part number for a complete starter with solenoid and just the solenoid for my Yanmar 1500D 2cyl (Red) tractor. If someone has the part number for a heavy duty solenoid please pass that along. My motor number is 2TR15-38858. Also did all 1500D's have the 11 tooth starter? I have been...

I need the part number for a complete starter with solenoid and just the solenoid for my Yanmar 1500D 2cyl (Red) tractor. If some has the part number for a heavy duty solenoid please pass that along. I can get the motor numbers if needed. Also did all 1500D's have the 11 tooth starter? I have...

My tractor is in first gear and the shifter won't move freely it's stuck. I cant figure this thing out. How do I free the shifter up?

. I am also looking at a Green 1500d. It has 786 hours on it. I know this probably isn't an accurate hour reading, just what he told me. Guy says it runs great with no known issuers. It's 6 hrs from me so I haven't seen it. The pictures make it look pretty nice. I'm not sure what it's worth. I...

Have a Yanmar 1500D, with the 2TR15 engine and I am having a hydraulic fluid leak coming from the starter. Don't know why it would be leaking hydraulic fluid from there unless I have a leaking line somewhere? If anyone knows what is causing this can you message me and inform me what is going on...

Thank you all for your patience, I am new to this forum and new to the whole experience. I was offered to buy a 1979 Yanmar 1500D. I wonder if it is difficult to get it serviced in southern Vermont (border with Mass). Also, I read glowing reviews about these tractors, but I wanted to make sure...

Hi guys - Please help!!! I have a Yanmar 1500D with front-end loader and a bush hog. For some reason my bush hog has stopped working. The shaft isn't turning (not sure if shaft is the right terminology). It cranks, drives, loader and bush hog both raise and lower, but the shaft that operates the...

I bought a yanmar 1500d and it is missing the front driveshaft. The guy i bought the tractor from claims that it got stolen. Everything seems to check out fine front end wise, but my question is has anyone ever made a homemade front driveshaft with some square tubing and some ends from tractor...

Greetings fellow 'Mini' tractor owners, I have just bought a used Yanmar 1500D 4x4 mini tractor with loader ...as I always like to do when I purchase any used machinery, I like to do a complete service of all fluids..filters...etc so that I KNOW it has been done properly.. I was wondering if...

I have a Yanmar YM 1500D. I ran it out of fuel some time ago. I bought a new tractor so this one has been sitting. I thought there was a vapor lock but I cracked the lines open from the fuel bowl all the way to the end of the lines. There was fuel coming from the lines into the engine so I am...

I'm new to TBY. Recently bought small Yanmar and first real time to work it broke splined end off spindle. Cannot locate one. Hoping someone might have spare, used or salvaged one for sale. Otherwise, any ideas? Tried some local machine shops but no luck. Thx

The Yanmar 1500D is back together with a new clutch. After several trials of air bleeding it started up. Now another problem, the diesel engine runs at full speed. I have tried moving the throttle. Throttle forward is supposed to be slower - back is faster but there is little speed change if...

After 1 1/2 years of sitting I finally got around to replacing the clutch and internals on my YM 1500D. Only one problem - when finished I had 1 part left over. After looking for about 2 hours, I asked 2 buddies where it may go, no help. I have even stooped to asking my wife to see if she can...

If this isn't the right place for this please feel free to move it. I bought a 1500D that is in poor condition to remove the loader from it for my John Deere. Now I have this tractor that I considered trying to fix until I got orders to Seattle for this summer. My thoughts was to try to sell...

The time has come to replace the battery in my Yanmar 1500D. Can I just go to Autozone or Napa or someplace and pick up a battery? What do I get? Thanks. My tractor isn't where I am and I'd like to be able to pick one up today on the way home from work so I can put it in this weekend.

I need to repair the brakes, no adjustment left. This baby does not have a convenient cover plate. I must remove the whole axle housing. Where can I find a write up procedure so as I don't take of to much stuff. I dont have any idea of what needs to be replaced. HELP:mad::mad:

hello all this is my first post hope you guys can help dad has a yanmar 1500d stock rims on front brand new 6-14 r1 tires on them he bought hoyes rear turf rims to gain wheel space wants to go with r1s i searched for 3 weeks closet thing i could find was goodyear dyna torqe 11.2-16 will this be...

I'm an old work horse thats seen better days. recently ordered a service manual for both of my tractors. After looking through both manuals I'm sure I will have questions in the future. hope there's someone thats been in my shoes and can help. see ya old work horse

I have been looking for turf tires for my tractor but now I am just trying to get new tires to get it rolling again. Can anyone tell me the difference between 6.00-14 and 6-14 tires, if any? One person on ebay said there was a difference but I am not sure. Also, what would be the widest tire...

I bought a Yanmar 1500D about 3 weeks ago. I got it home and was grading my road and looked down to see one of my front tires was flat and riding on the rim. The tire and tube are shot. Both have a pretty big gash in them. I have looked around online and local and the cheapest I have found was...

Tiller Question New to TractorByNet, been reading it for several years. 1st post. Question, I have is I have a chance to purchase a Kubota fs-850, 3pt-3ft tiller to use with my Yanmar 1500D. I was told that some of the fs-800-850 or s-800 tillers turn ccw at the pto and were used on the kubota...

Anyone know if a JD #7 backhoe will bolt up to the frame of a Yanmar 1500D? Thanks for any information you might provide. Mike

The arms go up when I start it and rev it up around 1500rpms and won't go down until I slow it or turn it off, foes down really slow, doesn't matter where the control lever is. How many gallons of hydraulic do I need to do a change?

We live in central Alabama and have owned a grey market Yanmar 1500D for over ten years. We use tractor for bushogging, drag box for driveway or leveling on any area. also loader for what ever needs moving. last year it wouldnt hold a charge and we tried having the alternator rebuild but...

I have a YM1500D.After replacing an aftermarket starter that came on this tractor with an Yanmar starter (Hitachi) I noticed the solenoid is getting really hot after running for a couple hours.The soleniod is new. Could the ignition switch be bad or the generator overcharging?The connections are...

Hello, The turnbuckle on my tie rod seems to be seized. Is there a secret to removing the tie rod/ends on a Yanmar 1500D? I have removed the nut on one side, the other side turns the threaded portion of the tie rod end with no apparent way to hold it. ie: there is no head to the bolt to hold to...

I just bought my first tractor and accesories, a Yanmar 1500D & Leinbach L7300 post hole digger. It also has a 4 in one FEL and a 48in slasher. I really am flying blind here, but when I try to attatch the post hole digger to the tractor, I am finding that the bottom arms on the tractor don't...

My 1500d (1975 originally Green??) started squealing badly while working a blade on my road at my lake house. I adjusted the clutch linkage, ran for a while (less of a squeal) and then the tractor would not shift into gear from neutral (too much grinding) or out of gear while in gear (No more...

I recently purchased my Yanmar 1500D. It ran fine. I left the lights on and ran down the battery. I put the battery back in and reversed the polarity (The cables were installed with negative-red and positive-black). I fried the wire to the voltage regulator. I replaced the regulator, all...

I would like to know if any body knows who sells a over haul or repair manual with all the torque specs and clearances. that is for the 1500d yanmar with the 2tr15 yanmar engine.:confused:

I'm new to this forum--good to be here! as you see, I have a ym 1500d whose oil pressure idiot light died. I replaced it with a gauge--pressure now reads 45-50 psi, which sounds good to me but I can't find anywhere what the proper operating pressure should be on this machine. Any help out...

HELP! When connecting an amp meter on this tractor, do you connect the + (pos) to the battery + (pos) and the - (neg) to ground or what? Need a simple wiring diagram....

I am considering a Yanmar 1500D and am wondering if it is feasable to retrofit my Cub front snowplow to the 1500D or just get a FEL?

This is my first posting, you all seem to have a really good forum going on and look forward to your responses. I just purchased a Yanmar 1500D to maintain what will end up to be about 12 ac of pasture for what my friend calls my wifes grass maggots (Horses). I figured if she talked me into...

I need a rear hub. Is there anybody in the north Alabama area that can sell one.

My tractor seems to blow black soot out of exhaust for about a minute when first started. The exhaust was replaced about 50 hours ago when I purchased tractor, so it cant be plugged. Air filter is new also. It runs well but does blow black smoke when reved up. Then runs clean at normal RPM...

My Yanmar 1500 has a switch to the left of steering wheel that can be set in 3 directions. In the '9-o-clock', '12-o-clock', & '3-o-clock positions'. What does this switch do? There has been an orange light that has been coming on too when I have been driving my tractor. My tractor has not...

Hi folks! I originally posted this on the Yanmar group (without realizing there was a Power-trac discussion here), and someone suggested I check out this discussion and/or repost here. Original post below. I'm a relative newbie to tractors in general (although I've done quite a bit of...