The hook on the High/Low shifter broke off. I removed the handle to be able to tap the old one out by pushing it into the case. Not a problem removing the old one as I tapped it from the inside out but cannot figure out how I am going to get the new one in as it will have to be put in from the...
Hi. My Dad has taken a bit ill over the last couple years so I'm now running his hydrostatic CT 445 on his property a lot to deal with hauling some logs around, plowing the driveway, tilling the garden, etc.
Last weekend I'd been running the tractor for about 30m with no issues and had to hop...
have a mccormick x50 that the range shifter is bound, does anyone have a quick fix other than removing the cab and top of trans to get it to shift, TIA
I HAVE A KUBOTA 2008 OR 2009 RTV1100CR SERIAL NUMBER 23233 THAT i AM TRYING TO REPLACE ONE OF THE SHIFTING CABLES/ CAN'T SEEM TO GET ALL THE GEARS NEUTRAL ADJUSTED RIGHT. I AM 78 YEARS OKD, BIT ALWAYS BEEN PRETTY GOOD WORKING ON MY EQUIPMENT. HOPE SOMEONECAN HELP ME OUT. THANKS GARY LOVILL
Long time , since I've posted ,but that just shows how good my Foton has been after 1300HRs..
anyways As i was getting ready for Tilling season , I went to tighten up the Shuttle shifter. to my surprise as i tapped up the remove the handle from the shaft the whole shifter came up !!.. and...
Hi all, hope one of you can help me.
I have a 1994 555D Ford backhoe and when I have been using it anywhere from 20-30 min the shuttle shifter stops working and it won’t go forward or reverse. After it cools down it can be used again…. What is causing this? It’s a real pain and can’t get much...
A new TYM owner here. A few months ago I bought a one year old T474 HST with 270 hours. The dealer told me he had sold the tractor as new and all maintenance had been done at his shop and the tractor was in great shape.
As an aside but not relevant to my current problem, the tractor needed...
Hey y'all, new here. Was hoping to find some help with my 5075E. Was out running it a couple days ago and it was shifting into all the gears and acting normal and then randomly one time I went to go back into 3rd from second (just going down the road, no implements running) and the shifter lever...
My Farntrac 25H has only 22 hours,,it is hard to shift into and out of gear most days...hard to get into neutral if tractor is running,,,is there a site or link where i can buy a actual repair manual so i can see how to adjust linkage
I am looking for infomation on adjusting the shifter or rebuilding the linkage on my tractor. Please let me know if you have any insight on this.
I have a Yanmar 1510D that runs well and works well but shifting is kind of a mystery. When its in gear it works great, I can shift up and down and...