reverse

Is this a common problem with hydrostatic transaxles?

Hi, wondering if anyone on here may know the answer to this. I ha a LS 3032HST tractor that keeps dying. It would start up fine. Issue is when I depress a pedal to go forward or reverse that it would die. I've made sure that parking brake is off. Any thoughts on what else I can try or look...

I have an older Troy Built Pony and want to know how to add a reverse. There is a kit for sale but it appears to be one pulley and something I can't identify. Has anyone used this kit? Does it have all the pieces I need? I have not been able to find anything specific on the net. Any help...

My mid 90s B7610 has been a 100% faithful workhorse for 20 years. I don't know it's hours as the meter reads 600.7 and that can't be right assuming the last digit is 10ths. I never pay attention to it, just do annual oil changes. Today it lost forward and reverse power. It will move on flat...

Hello, I was just borrowing a friends TYM T474 and everything was working great this morning, I stopped for lunch, but this afternoon I took it down my steep driveway (16% grade) and all of a sudden it had no power to back itself up that it backed up easily that morning and for a week prior...

my tractor move forward ok slow . reverse it just movie slow very slow . what is the problem with it

Hello all. I recently bought an RK55 and it’s finally dried out enough here in NW PA to use it without tearing the daylights out of the ground. My first issue is this deafening, ear piercing reverse alarm. Doing loader work with this alarm is insane. I am sure it’s not as simple as a...

MX5800 starts fine. Can be standing next to it or sitting on seat to start it. As soon as you rock the pedal to go forward or reverse, the engine cuts out. It will also quit when you turn on the PTO. Always restarts just fine. We've thrown a seat sensor at it and the pedal sensor found up...

Hi all, I have a 555B, I recently got the engine running and went to drive around. I noticed you must rev the engine to get it to move at all. It has no pulling power and will simply stop if it encounters any force against it. Where should I start with this? I’ve considered breaking the...

I have a 2011 JD 3320 eHydro with just over 500 hours on it. I've been using it regularly of late to move mulch, bush hog fields, tow a trailer around the yard, etc and no issues. When I went to do some tilling today the forward motion stopped suddenly – forward and reverse pedals did nothing...

Have a new lx4020 and having a strange hydro pedal issue. When trying to reverse there’s a metal piece that looks like it raises up into the operator platform that snags (misaligned?). If I push it over it works fine but seems to snag regularly making reverse not work. Related the pedal also...

i was using it to move some dirt and rock in my driveway and then i put it in reverse and it would not move i put it back into forward and it would not go forward either I've changed the Hydraulic Fuel and Filter and it still wouldn't go forward or backwards

Hi - My 2021 450 only goes backwards. It feels like something with the hand control/foot control as opposed to an engine/transmission. FWIW - it goes backwards very fast! Anyone experienced this before? Is it possible to access from the top? If not, creative suggestions to get it up off the...

I bought an rz50 off my friend, I have mowed with it for years. It lost reverse on the right side, but forward is fine. I do not think it is the pump or forward would not work. The linkage looks to be fine. Any suggestions? Also ,when mowing with it if you pull the right lateral back, you can...

Was mowing and stopped to back up and shuttle shifter went in to reverse just fine and backed up. When I tried to shift back to forward the shifter wouldn’t move. I can go in reverse just fine. Changed hydraulic filter and there was quite a sediment buildup on the screen going out of the filter...

I just acquired a 335 and one odd thing I discovered is that when you hit the reverse pedal, the pto shuts off. Was told this is a safety feature. I have never known this before but I am certainly looking for a way to change this feature as I mow in reverse sometimes. Any advice appreciated.

does anyone else get a whining sound when in reverse on there workmaster?

My Mahindra 3016 is having problems with shifting forward/reverse. It feels like it wants to stick in gear. I've tried adjusting the clutch and it's seemed to help some what, but it still hangs up and gets tough to change shifter. I have 310 hrs on it. Any help with information on a solution...

A couple weeks ago, my beloved 1970 MF30 industrial tractor suddenly failed to move forward or backward while scraping on the ground. The tractor has Perkin AD204 4 cylinders diesel engine. The tractor has no indication of any noises nor wrong movement before it happens. Only I suspect there...

A couple weeks ago, my beloved 1970 MF30 industrial tractor suddenly failed to move forward or backward while scraping on the ground. The tractor has Perkin AD204 4 cylinders diesel engine. The tractor has no indication of any noises nor wrong movement before it happens. Only I suspect there...

Hello, new here I Have a Yanmar F16D tractor that i have had for a few years now that has worked pretty good for me. today I was driving it and went to change from reverse to 2nd gear and it jus stayed in Reverse. I can change the gear lever to any of the r 1 2 3 and it still goes in reverse...

I have an LS MT342SH with Cab and have noticed reduced power when driving in reverse. I wonder if this is normal or an indicator of a problem. I run the engine at 2000rpm and am in 4-wheel drive when working it. Recently, I was removing snow on my steep paved lane (10 degrees at steepest point)...

Hi. Just recently bought a new 2022 Mahindra 5155 4x4. I’ve put 12 hours on it so far. About 1 out of every 4 reverse shifts on the synchro lever it kicks out of gear and horrible grinding sound. Hasn’t done it in forward at all only reverse. I messaged the dealer I bought it from and he says “I...