massey ferguson 12

  1. R

    MF 12 baler right side not tying....thoughts..see photos.

    Hey guys, I bought this used hay equipment from a farmer down the road (he had passed away) and everything has been going great. I have already cut and raked into windrows and ready to bale. I did two bales then the right side (from behind the machine) will not tie or something has gone...
  2. T

    Kohler 301 Wide base fit a Massey Ferguson 12 Hydro?

    Hoping for an assist here. I have to replace the Tecumseh HH120 on my Massey Ferguson 12 Hydro. I came across a very good running Kohler 301 wide base but I don't know if the wide base will fit my tractor. Thanks.
  3. Y

    MF 12 needs honda engine pulley ptoblem

    Replacing the old motor in My MF 12 with new Honda the old drive pulley had a 1 1/8 bore Honda has a 1inch shaft cant find a replace ment drive pulley? Help
  4. drdoolittle

    MF 12 Pickup sprocket showing cracks

    Good evening. Was out looking my square baler today and noticed the sprocket that drives the pickup is cracked on 3 of the for spokes. Will probably be looking to braze/weld it in the morning. However, if that doesn't work would replacing that sprocket (a 2040 pitch 23 tooth sprocket) with a...
  5. D

    New Member Massey Ferguson MF12

    New to the site, i am in search for a wealth of MF information. Granddad gave me his MF12 about 5 months ago, it has a Tecumseh HH120 engine he says was rebuilt about 5 years ago and has not been started in the last 3 years. He says battery is shot and rats ate some wiring. i got it home and...
  6. J

    MF12 Hydro Garden Tractor

    Recently purchased the machine and am awaiting the arrival of some parts and the service manual. When I purchased the machine I noticed the steering wheel had a lot of play in it. The original owner said it was like that for years and didn't affect the steering, but there is definitely too much...
  7. S

    MF12 hydrostatic transmission

    Everything works fine except for the tranny. Have changed the filter and fluid but no joy. Help!!!
  8. P

    massey ferguson 12

    Hey i'm new to tractorbynet, looking to see if anyone has or knows if a rear hitch assembly is available anywhere.... thanks
  9. Birch Hill Farm

    What grade bolt to use as shear pin on a old MF 12 square baler?

    I have an old MF 12 square baler and it keeps eating through grade 5 bolts even when there is almost no load on it they will shear. Is something out of adjustment or do I need a higher grade bolt? I can spin everything by hand when empty so I dont think anything is binding. Maybe dull knife?
  10. C

    Massey Ferguson 12 hp lawn tractor won't drive

    I went to move my MF 12hp tractor but it won't go forward or reverse. Starts up fine, but when the hydrostatic gear lever is moved, nothing happens. It was working fine when I parked it. Took mostly everything apart, but can't find anything that is obviously broken or sticking. It seems like...
  11. M

    Tractor Sizing  mf 12 baler

    Sorry I'm new here and posted this question in the attachments section, but I'm looking at a mf 12 baler, anyone have any experience with one, what did/do you run it with, how big are the bales it puts out, can you still obtain parts easy. Thank you for your input MTkid
  12. M

    Massey ferguson 12 square baler

    Anyone have experience with a mf 12 baler. What do/did you run it with. How hp many would work, how big were the bales it put out in pounds. Thanks in advance.
  13. M

    MF12 Hydro

    I have a Massey Ferguson MF12 with a Hydro Gear hydrstatic transmission that just stop pulling. I need a source for ways to fix it. Repair manuals and parts source. My email is major1969@hotmail.com.
  14. Simpkins85

    Massey ferguson 12 square baler

    I have a 12 baler and went to bale hay and when it ties the bale as soon as it ties it breaks the shear pin everytime any ideas ?
  15. Birch Hill Farm

    MF 12 sticking bales together, Help!

    Hello, I have a a MF 12 bailer which we ran about 400 bales through over the last 2 days. The longer we baled the more it began to have bales stuck together. Its always on the in board side and it would be about a 3" diameter tuft of hay still connected to the previous bale. It really...
  16. M

    MF12 Massey Ferfuson Garden Tractor

    Hello, I'm new to this, and I hope i'm in the right tread. Here is my question: I have a MF 12 Massey ferguson Garden tractor, and the carburation is finised. Its a 12 horse Tecumseh engine, and I can't find a new carburator for it. I have found similar ones to it but was wondering, if i put...
  17. P

    MF 12 Project & new to forum

    I just bought an old MF 12 garden tractor and I need help with everything! First thing, am I in the right place?? Next thing, is this unit a 6 volt or 12? if 6 how expensive, hard is it to convert to 12volt? Belt routing and sizes. The drive belt that is on it is way too tight I think???? starts...
  18. N

    Looking for tiller for Massey MF12

    If anyone happens to have one for sale or knows of one for sale in the Pa area please let me know. Wife wants me to till a garden this spring and I already missed out on one. Thanks,
  19. G

    mf 12

    HI I just got a mf 12 lawn tractor 1972 and i was wondering if anebody knows were to find pdf files on the 12 hp tecumseh motor or any thing that would help me work on this. I have been to mf i cant find much on this model thank you. Ron
  20. K

    MF 12 shear bolt stuck in bushing

    I know this will sound crazy but while baling today the shear bolt sheared, no big deal as it happens once in awhile, the problem is 1/2 of the sheared bolt (no threads just bolt head and shaft) is stuck inside the bushing that holds the shear pin in the flywheel. Tried punching it out with...
  21. T

    MF 12 square baler parts?

    I have a MF 12 twine square baler in which the plunger froze in the chute. I have removed the plunger and now am trying to find some replacement wear plates and shims. Any help on where to find these parts? Thanks
  22. 1972SprintConvertible

    Parts needed for a mf12 hydro

    I am looking for the sheet metal that goes from the foot rest to the rear fenders on both sides and the center hump to the seat, a two piece massey seat so I can get rid of the craftsman seat, a grill and any other parts you see I may need even manuals. Thanks
  23. M

    Help with MF 12 baler

    My #12 baler will not tie when I get the bale tight enought to handle. If I leave it loose it ties fine but you can not stack loose Hay. Is there any thing that I can do to make it tie the tight bale.
  24. CUTiger

    Help with Massey Ferguson 12 Wire Hay Baler

    I bought an old Massey Ferguson 12 Wire Hay Baler off eBay. The guy gave me a manual for it but it's for a twine baler. Can anyone help with the "threading" for a wire baler? Any advice would be appreciated (and yes, I already thought about giving it a paint job and using it as yard art)! :D
  25. W

    Massey Ferguson MF12 Help!

    Posted this in the Massey forum as well but maybe this is the place. Well I inherited an old early 70's MF12 lawn and garden tractor. I was given the tractor for free. I really wanted this tractor for doing some serious food plotting for deer as it has the 38" 650 rear tiller. This thing...
  26. W

    Vintage MF12 help!

    Well I inherited an old early 70's MF12 lawn and garden tractor. I was given the tractor for free. I really wanted this tractor for doing some serious food plotting for deer as it has the 38" 650 rear tiller. This thing could do some serious damage to the ground. Anyway the state of the...
  27. Iplayfarmer

    MF 12 Dies

    I just got an old Massey MF12 garden tractor. It starts up everytime, but after a few minutes dies. After it dies I can start it right back up again with no problem. Any Ideas as to what's going on or how to fix it?
  28. W

    MF12 parts

    I have the chance to get an old MF12 tractor for free. It is in pretty good shape but hasn't been run for years. The fuel tank and carb are probably all gummed up and it needs a new hydrostatic pump I think. Does anyone know where I can buy parts for this? How much will a hydro pump...
  29. H

    MF12 gear shifter needed

    I have an old MF12 garden tractor from the 1970's, and the gear shift lever broke. Any ideas on where I can get a new or used one ? Thanks
Top