kubota m5700

Noise in hydraulic lines

I have a 2005 Kubota M5700 tractor with a hydraulic shuttle. When I put the shuttle in neutral it emits a squeal like it is starving for fluid. I checked the level it is full. Just did complete 600 hour service 30 hours ago. Has all new fluid and filters. Doesn’t make the noise when in forward...

just changed the oil and two filters on my Kubota m5700, used the Kubota filters and the Kubota Super UDT oil, went to start it up and no power steering, loader won't work and 3 point will not lift. Wondering if there is a way to bleed the pump.

Was contacted by my dealer today about a bracket so where on the tractor that is causing problems. Wife talked to lady at dealership and just wanted to know if I still owned the tractor. She said a mechanic would be calling me to replace it? Dealer is about 50 miles from me. I値l let all know...

I have a leaky front wheel oil seal on my M5700. There are a few videos on youtube of similar repairs but all from smaller tractors/fewer parts. Do any of you have a video of replacing an M5700 seal? Those bolts haven't been off in 20 years. I'm afraid to pound any harder and I'm not sure about...

The leveling box on my m5700 looks like it was hit by something from the previous owners. I took it apart and it damaged beyond repair. I need to get a new one but the part from Kubota is like $600. There are lots of aftermarket options for other tractors for $80-150 but I can't seem to find one...

The leveling box on my m5700 looks like it was hit by something from the previous owners. I took it apart and it damaged beyond repair. I need to get a new one but the part from Kubota is like $700. There are lots of aftermarket options for other tractors for $80-150 but I can't seem to find one...

My father picked up a M5700 this weekend. Overall its in nice shape, but we have a couple things we are trying to figure out. Most importantly, it has a 'knock' to it, that doesnt sound like a rod knock, but is something that does need attention, and we arent quite sure what it is. Seller had...

Hello ! I'm new here but have been reading the forum for a while in order to get a feel for how to post and reply. There was an old thread many years old that I posted on but thought since it's so old people won;t see my post after almost 15 years since the last post. I'm looking for suggestions...

I have a kubota m5700 that i purchased 1 year ago. when i first bought it the fromt loader was a bit jerky in cold weather, it has gotten gradually worse over time to the point where now it wont lift at all and the 3 point hitch will not lift and now the steering is gone. i have just the fluid...

I have a kubota m5700 that i purchased 1 year ago. when i first bought it the fromt loader was a bit jerky in cold weather, it has gotten gradually worse over time to the point where now it wont lift at all and the 3 point hitch will not lift and now the steering is gone. i have just the fluid...

Hi all - wondering if anyone has an M5700 4wd with LA1002 loader and quick attach. I am specifically wondering if anyone having this combo has ever lifted a 1 ton pallet with forks. Looking at the specs, it seems that might be asking too much. I am replacing a New Holland TT60A with 620TL...

Looking at a used 2005 M5700 for sale locally. Only 13 hours and it is equipped with a la1002 loader and M4711 backhoe. It has the shuttle or reverser on the steering column. What is a ballpark value on this 10 year old tractor?:confused3:

looking at this tractor to buy.only has 1400hrs been used in poultry houses,problem is grinds when shifting gears,can turn tractor off then shift it,also stopped pulling going forward,reverser seems to work ok,next problem 3 pt hitch won't raise,do you think it needs clutch,loader works well:dance1:

While installing new front tires (9.5 x 22) I discovered several stretched wheel studs. This is the first time the wheels/tires have been removed. I installed three (3) new front wheel studs/lugnuts (Kubota OEM) M14 x 1.5 thread. My owners manual calls for 124-145 foot pounds torque value...

I just purchased a m5700 cab. every time I engage the pto a buzzer goes off for aprox 10 seconds talked to the dealer they didn't know anything about it has anyone had this happen?

Want a more fuel efficient Kubota farm tractor. This one guzzles diesel. Any suggestions!

kubota m5700 4x4 shuttle shift 623hrs. Loader $19500.00 is this fair?

I'm having starting problems which I think is caused by the safety switch on a cabbed m5700. Does anyone know where the switch is located? The seat on this tractor doesn't have one. Thanks Richard

I feel a little dumb asking this question but I cant figure it out. I just bought a used M5700 from a private seller. currently it starts and runs great but looking ahead to the winter months I need to figure out how to use the glow plugs. I have a couple of older Kubotas but the glow plugs work...

I'm looking to help my Dad purchase a newer cab tractor to bush hog and take care of his 65 acre farm. We were wanting a cab tractor mainly because of heat and dust and he's 72. I found a Kioti DK 55 and a Kubota M5700 both with cab loader and 4x4 and both around 1700 hrs and within a thousand...

Kubota's are known to have clutch problems when disengaging clutch for rolling back etc. Asheville had problems with many of theirs, so I try to use the clutch for shifting only. Let someone borrow mine for moving dirt and should have known they would have their foot in the clutch much of the...

Hi All. I have been offered a Kubota M5700 for 20K by a neighbour, he says its only done around 1500 hrs but given its age (probably built around 2003) i would think its done a fair bit more than that. It comes with a forklift attachment on the front (i think it was used on a winery previously)...

Anyone else having a/c problems? Mine is working but it will periodically stop. If I turn it off for 30 seconds then it will restart. Any suggestions on fixing this?

I've just acquired a Kubota M5700 Utility Special and separately a Woods bb7200 rotary cutter.My kubota owners manual says 1200 lbs. Max for 3 pt. implements and this cutter weighs about 1450-1500 lbs.according to it's manual. The manual also states 4200 lbs lifting force at the links and 1500...

Got 1100 hours on the M5700, and the right brake needs replacing. I do most all of my own mechanical work, but have never tackled wet brakes on a tractor. Any advice, info, or previous experiences would be appreciated. Also is there a way to access the shop manual on the web?

Has anyone put a backhoe on a M5700 with a cab on the tractor I called a dealer several years ago and they said I couldn''t put a backhoe on it.

I recently replaced a hose on the control valve and when I started it back up the 3 point wont raise. When I leave the 3 point hitch lever in the lift position and curl the bucket it will raise. Is air in the system? Any help would be appreciated.

Hey All, I've been looking for about 6 months and have found an M5700 with Cab, and Loader, and an L5030 HST with Cab and Loader. They both have ~500 hours and are similar in price ~23K, the L5030 HST a little higher. What are the main differences between these tractors, besides the obvious...

Just wondering if anyone else has had this issue. When I raise my rpm's up with either the foot throttle when I try to go back to idle or a lower rpms it drops a few 100 rpms but doesnt go all the way back. I can reach around to where the hand and foot throttle meet, push one of the parts there...

My M5700 makes a whining noise. Can not locate where the sound comes from, it seems to travel all through the tractor. It sounds like when a hydraulic pump is ran with out fluid. The fluid level is good. All hydraulic circuits work fine. Noise seems to be worse at idle and taper of above idle...

Would these work well? Rake Master Cylinder Pair * Make Offer *

The LA1002 loader on my M5700 maximum lift height at center pin is 114". I have a job where dirt is needed loaded an a dump truck. I normally don't do much dirt work so I have no clue if my kubota will left high enough. Would the buta be big enough for the job or do I need a large industrial TLB?

Want to get parts for a hydro top link. Already have 1 remote. Any idea what size/style quick disconnect fitting the factory installed. Looks to me like there is 3 different types of hydro disconnects.

found a m5700 with 4wd,loader with bucket and pallet forks, 460hrs, 2004 model. Seller says everything works good and no damage. They want $15500 which seems to be good price. Seller said they have had problems in past with cashier checks and with the soar in frauds I can understand there...

I am looking at perhaps purchasing a 2001 FWD M5700HD with a loader and 1725 hrs on it. It runs great but when standing behind it I can hear a slight knock. Is that a normal sound coming from the hydraulic pump or something that indicates I shouldn't buy this tractor. It is a little rough...

Hi,I own A M5700 Kubota 4x4 cab and a LA1002 loader The a/c does not seem to be cooling as good as I think it should. I have blown out radiator,condensor and a/c filter have also removed roof and blew out fan and evap. I am in Florida, I have to run fan on high almost all the time. I have...

What would be a fair price for a 2004 M5700, 4WD, w/LA1002 loader, extra set of wet lines to the rear, 448 hours, ROPS and Canopy, R4 tires, Shuttle shift (but still need to use clutch)? It's 62HP engine, 52HP PTO. Paint's in good shape (loader is a little faded) and tires are around 70-80%...

Does anyone have a service manual with the speck detail for setting valves on a Kubota M5700. Thanks for any help.

I found an M5700 I like and the price is reasonable, but it has no loader. . What's a Q/A FEL for an M5700 gonna cost installed? I know many brands fit, Woods, Bushog, Kubota, etc. Anyone have any experiece with them, especially on price?

The equipment brochure for the M4900/M5700 line from Kubota says "Hydraulic shuttle (M5700 only)". I gather this means that the 5700 needs no clutching when going from forward to reverse and that the 4900 does require that the clutch be depressed. Other than the 5700 being faster to shift when...

Hi all. I live in Vermont and will be visiting the local Kubota dealer in a week or so. I was wondering if I could get rough outline of prices for the following tractors, which will include no cab, 4wd, a bucket, shuttle-shift and two remote connectors on the back. M5700 M6800 M6040 Are these...

Need suggestions on trailer for my Bota M5700. The tractor has loaded tires & I can only estimate weight with FEL & Woods 8400 Brush Bull at around 8000lbs??. I have an F350 V10 rated to tow 12,500lbs. That should allow an empty trailer weight of around 4000lbs. I would prefer a tilt trailer...

I am new to this group.. and new to tractor ownership. I just purchased 40 acres north of Portland/Vancouver. It is rolling to steep rolling, with maybe 15 to 20 useable acres. Medium tree coverage (8 acres open meadows). The property is in a shambles, heavily covered with blackberries. I...

Came across a M5700, Synch shuttle with loader, 4WD, R4 tires like new, 13 hours for $24800. Wasn't currently in the market, but when I was looking (last year), this does not sound like a bad deal (compared to some of the L series I priced out new). Never looked at the M series though. Am I...

Greenhorn here looking at an '01 M5700 with 300 hours. Not used much as a result of an untimely death 3 years ago. Been kept running on regular basis by the father-in-law (250 hrs in 3 years). Service is a question mark. Has FEL(LA1002) & BH, no other implements. What's a fair price for the...

Greetings! I'm brand new to the site and was hoping that some of you could steer me in the right direction. I currently take care of 64 acres of land that consists of hardwood forest, fallow fields (with about 10 billion chinese tallow triees, aka. chicken trees), and some of which can get...

I would like to thank everyone for all the questions you have answered for me ,it was a great help.I traded my M5400 8 by 4 std. shuttle shift trans. for the hyd. shuttle shift with creeper gears which makes it 16 by 16.I needed the slower speeds in order to run the snow blower on the back.The...

Ok my ORANGE brothers I have read a couple of post in the Gereral Forums abut the M4900, M5700, and M6800 being phased out and replaced with 5040, 6040, and 7040 . Anyone heard anything? What about the Grand L's any additions/changes?

I currently own a L4630 cab and air and I am looking to possibly upgrade to a M5700 cab and air 4wd. Looking to go with an eight foot bush hog compared to a six foot with my current rig. Does anyone know anything on this tractor as for as pros and cons? I appreciate all the input, thanks in advance.

I am looking to buy a mid sized tractor for keeping up my 20 acres.FEL,brush hog,post hole auger,box scraper,ditcher and maybe put up hay in the future.I wanted to buy a used tractor but have not found a good one yet so am looking at new .I was a little put off to find out the Deere was made in...

hi -- I am from New Hampshire and i am looking at a m5700 -- dealer wants $26580 -- is that a good price? loader is a LA1002 for $4750. i am also considering a BH9000 backho for a quoted price of $9150. any comments? Is it worth stepping upto the 6800? I loved using the automatic shuttle...

Other than engine and HP, which is the best value of these 3 Kubota beauties...and what's a good price new for each w/o any options?

The M5700 has HST. shuttle shift,I notice I have to use the parking brake all the time. It will roll when still in gear and not running. The worst thing is nobody can remember to take the brake off when starting out. We are all so used to the Farmall M & H. I guess I will have to put a large...

I have been outside looking in for some time now. Thought I should say Hi. Three weeks ago my brother (who being a disabled quad) and I bought the M5700, He has been on it most of the time mowing fields, what a great tractor. I,m left using the IH454 w/fel. I bought my wife a Bx1500 w/fel,mmm...

Can anyone help me decide between a M4900/5700 and a L5030? What should the price difference be? I'm getting a FEL and 6 ft HD shredder, 7 ft disk, & boxblade.

I posted a couple years ago about adding a 2-speed pto to my L5450, so it has selectable 540 and 750 rpm speeds. At the time I didn't know if this modification might be possible on other models too - but it may be. I was looking at Kubota's Australia website today, where they describe the...

Looking to hear from M5700 owners on how they like their tractor? The good and the bad.

Hey, am trading my JD2020 and the M5700 is one of the tractors (w/LA1002 loader) that i'm looking at. i use a woods 720 bush hog, a very heavy duty maschio 60" tiller and a 5 tine chisel plow. any opinions about this tractor are appreciated. thanks, paul

Hey all, new here, great site. was recommended by some on the garden web. anyway, as you can see from the "subject" am looking at the JD5320, Kubota M5700 and NH TN65. i currently have a jd2020 w/loader. i have a woods 720 bush hog, a very heavy duty tiller (maschio) needing 50hp on the pto...

I have a quote for a M5700 and I was hoping for some feedback. M5700HD 4WD LOADER WITH QUICK ATTACH BUCKET 72" HD BUCKET WITH BOLT ON CUTTING EDGE BLOCK HEATER LOADED REAR TIRES REAR WORK LIGHT $29,650 + Freight & Taxes 4 IN 1 BUCKET WITH HYDRAULICS ADD $4,500 This seems a bit more affordable...

I have been looking at a M5700 with a cab. I think this is the right tractor for me. I have 88 acres and 45 head of cattle give or take and alot of mud in the winter; so I plan on geting 4wd. Any suggestion would help pros, cons, price, ect.

I am considering purchasing a M5700 SDF with a FEL and HD mower. Is there anything special that should I be aware of before purchasing one?

I can't figure this one out!!!??? Since I accessorized my M5700 with the attached photo it runs ROUGH, SMOKES, won't hardly start, and has no PULLING POWER!!!! Maybe JimBinMi can help!!!

Frankly thought all you owners were telling a big story about FEL's and how easy they are to disconnect. Prior to buying mine I noticed a few posts about the subject and all said how easy it was. WELL it's true. Should have known better than to doubt the integrity of Kubota Owners. 20 mins tops...

Well I couldn't hardly have only Harv trying to outrun the timer on the camera. Maybe this picture will help all of you relate to an old hillbilly and his future messages a little better.

If you guys want to drool over my new tractor go to the Tractor Photo forum for post.