kubota l39

A bit of a strange one I guess. Had just turned off from working then wife wanted to remove wreaths. Jumped back on and started quickly and before it completed started I moved to steering column shift lever into forward. It immediately shut down although it was never completely started. Now it...

I bought a used Kubota L39 with 300 hrs on it. It now has 500 on it but the curl function is slow. You need to throttle it up to make it remotely move. Would love to repair but not a lot of information on the control block for loader. Any help would be great TIA

Hi Guys, I'm new to this but am looking for some help please, I purchased a used L39 tlb and the hydraulics on the front bucket are wrong, if you push the stick right the bucket curls and if you push left it dumps. I took it to my local workshop and the mechanic tried changing the hydraulic...

I am a proud new owner of an L39. Only has about 550 Hrs on it. My question is about a noise I hear when I am traveling. IT doesn't happen all the time, it happens whether or not the 4wd is engaged, and no matter what gear i am in, though It almost always is there at higher range gear operation...

Ya, Im starting a new thread. This is a separate question. I have researched how to check the pressure that the main relief is set at, and how to adjust it. (I believe mine is set low) I have ordered a gauge and plan to test my pressure sometime next week. My question is, Has anyone else done...

Hello TBN, Im new here. Ive done quite a bit of lurking leading up to and after purchasing my used L39 Kubota. I have chimed in a couple of threads. Im hoping that now a new thread will get some input to help me out. I bought The 07' L39 with 530 HRS a few weeks ago. I have noticed some issues...

Hello TBN, Im new here. Ive done quite a bit of lurking leading up to and after purchasing my used L39 Kubota. I have chimed in a couple of threads. Im hoping that now a new thread will get some input to help me out. I bought The 07' L39 with 530 HRS a few weeks ago. I have noticed some...

New to the site, but have been reading for years. Hopefully someone can learn from my personal experience. I had owned a 2004 L35 TLB for 12 years and used it with basically problem free. (only real issue was a rear wheel had been loose for years - one of those sounds you just got used to and...

Hi guys. looking at a 2005 Kubota L39 TLB with GTS. Haven't seen it in person yet but it has 4K hrs. Seller says he has records and manuals. He wants 18K for it. What do you all think of the price assuming average wear and tear and cosmetics. Do you think I would be way off base if I offered 16K...

I've seen this topic get brought up a couple times, but thought I'd ask for the opinions of the knowledgeable members here. I've been lurking on TBN for quite some time, but forgot my login and password so recreated using information I know! I currently own a Kubota L35 and love it, but really...

My L39 has a significant pause between shifts. I really don't like this. All the Deeres I've operated with power shift (7210, 6415, 8100, 8210) are positive and immediate while still being smooth. When I shift, I always let up on the throttle a bit to ease the shift anyway. There is...

I've finished my Laurin cab installation. I added extra lights and replaced the factory lights with LEDs. Looking forward to deep snow. I can't bring myself to cut up the ROPS without a serious try at a new home. I don't have a project requiring the steel either. So, see the pictures and...

I need a used BT1000AV Backhoe Attachment for Kubota L39 Anyone here have a used BT1000AV backhoe attachment for a Kubota L39? I found a nice, almost new L39 but it's missing the backhoe. :(

Hello All, I have just purchased a 2009 Kubota L39 Tractor Backhoe. I have three attachments in mind I would like to purchase in order to help me make full use of my purchase. I am a rookie/virgin owner/operator so any and all info is greatly appreciated. I would like to add a grapple bucket...

Hello, I have a 24" pin-on bucket for my L39 and am wanting a 12" for trenching. I read somewhere about the buckets from other manufacturers that will fit Kubota (as well as from the line of Kubota excavators) which will fit the L39/L45. I was hoping someone would know which other buckets may...

I have the Kubota L39 Tractor. The problem I am having is when I put it in gear, forward or reverse the tractor will stall. I have the repair manual for it. I checked all of the sensors and didn't find any problem with any of them. Can anyone help with this?

I've just added a BearCat pto chipper and need 12 v for the controller. I've previously tapped the battery for a snow blower but I was wondering if anyone already solved this issue like from tapping the seat or the side console for 12 volts. Key switched would be nice. Most power is key...

Well after 11 years of hard use I can accept that a few breakdowns are going to happen. The swing circuit on by Backhoe is almost totally failed. No Oil leaks and the cylinders themselves seem okay. There is a hissing rattle sound coming from the control valve. The swing struggles to...

Looking for someone that knows what solenoid valve and base I need to add a 3rd function valve to my Kubota L39. Im a Electrical/Hvac contractor so I don't feel the plumbing of the hydraulics will be a problem but I am looking for someone that knows what I need for parts to make this happen...

I want any mechanical ideas on how not to break the hoses or fittings when I inadvertently raise the FEL and tip all the way down-- Picture A. I'd like to take the slack out of the hoses and mount the cushion valve but too short and I'll break them on some numbingly cold day when I forget I...

I must have poor muscle memory. For instance every year I have to practically relearn how to ski. I'm embarrassed at my lack of skill I show when getting back on equipment I have not used all winter. (i.e., my excavator). After a little seat time I could hand you a beer with my old excavator...

I've posted this in "Hydraulics" as well hoping to find some help. I've got a problem and I'm looking for some help. The issue is very weak backhoe on my Kubota L39 TLB. I bought the tractor recently second hand from a non-Kubota dealer with 400 hours on it. It was a trade in from a known...

I've got a problem and I'm looking for some help. The issue is very weak backhoe on my Kubota L39 TLB. I bought the tractor recently second hand from a non-Kubota dealer with 400 hours on it. It was a trade in from a known customer with no reported issues. It did sit on the lot for some time...

Hi TBN friends. My Kubota L39 will go into neutral but the neutral light will not come on and I have to find the "sweet spot" for the starter to engage. I would guess this has to do with the transmission safety switch either gong bad or some adjustment. Can anyone offer suggestions as to its...

Hello all, I recently purchased a L39 TLB with good turf tires on it. I am not happy with them around my barn in the mud and manure so, I want to replace them with the standard or a more aggressive mud type R4 or AG tire. All my research seems tells me that a complete rim change out on the...

I've got some question for you! At first I was searching for a JD110 tlb because I think is more tractor size is better suited for my need. But I never found a good one. So It's been a while that I check for a use L39. I finally found one that look to me a good buy. It's a 2007 with only 580...

I have a Kubota L39 TLB and shopping for a root grapple. The Tractor/Loader/Backhoe weighs 6987 lbs. The Loader has a lift capacity of 2767lbs at max. lift height. wanted to know if compact type grapple would be strong enough to stand up to push weight of tractor and if the added weight of...

Hi everybody! I've just sold my kubota b2320 with the back hoe to my father last mounth. I sold it to buy a bigger real tlb! I have try 2 John deere 110 tlb and I realy like the size of this tractor. The problem is that their is no 110 tlb for sale in Quebec/Ontario in my hours range. The two...

Hello, I see the multiple drain points for the fluid and realize the GST and hydraulic fluid are the same but, do they have the same fill point behind the drivers seat aswell? Does any one know what the valve clearance should be and if any special tools are needed? May be I should just buy the...

I need to remove the roof and ROPS off my Kubota L39. I am aware of the safety issues with doing this but I need to know if the roof-posts are structurally required for the loader? The two front posts just bolt to the loader so I am assuming it isn't required. I just wanted to run this by...

I have a 2006 L39 TLB I am looking to get a woods TSG50 PTO stump grinder. Because the L39 has 3 lines (2 pressure, 1 return), how do I power the hydraulics for the stump grinder. There are 2 directional valve levers, Is one for one pressure line and one for the other? Do I combine the two...

Hi all, Been Lurking here for some time. Love all the excellent feedback people get. I have been learning A LOT. I currently have a 53' Ferguson TO 30, but we are buying a piece of property that (long story short) will require a really significant amount of dirt work (building pads...

Hi. I gave a 2006 L39 that I would like to sell just the backhoe attachment for. The hoe is in excellent visual condition, always stored inside, and very good mechanical condition. No welds, cracks, pins tight etc. Hoses are like new. I have a 16 and 24" buckets for it. I only want to sell...

I was using the L39 tractor and the GST light started flashing on the control panel. Error 61 through 66 started flashing on panel, along with 1 7 8 NG, 2 9 10 NG, 3 4 11 NG, 5 6 12 NG, 1 - - - 6 NG, 3579 NG. The hydraulics still work, I used the backhoe to pull the tractor to a good spot. I...

I was using the backhoe- L39 tractor and the GST light started flashing on the control panel. Error 61 through 66 starter flashing on panel, along with 1 7 8 NG, 2 9 10 NG, 3 4 11 NG, 5 6 12 NG, 1 - - - 6 NG, 3579 NG. The hydraulics still work, I used the backhoe to pull the tractor to a good...

2006 L39 TLB, recently serviced, running fine, great condition, Service light on, tried to turned them off by holding both buttons, worked before, now...various letters keep coming up! Help! Many Thanks

I have failed two hoses recently where the failure appears to be from the outside in. Hoses were in good condition except where worn. In the BT1000, the hoses proceed through a narrow opening just wide enough for the 6 hoses. If I pull the boom toward the cab, they can pinch the hoses at full...

front loader kubota l39 seems to be out of line with cylinders. recommendations on how to fix

Any idea how much a used 2ft bucket for a L39 (bt1000 hoe) should cost?

Any idea how much a used 2ft bucket for a L39 (bt1000 hoe) should cost?

Any idea how much a used 2ft bucket for a L39 (bt1000 hoe) should cost?

2006 L-39 999 hrs. Won't fire up. Turns over fine just won't catch fire. Any ideas. Fuel good, filter clean, ran OK 4 weeks ago.

No power to push a load of dirt

Kubota L39 slow/no power to push dirt...Not all gears has power

I am picking up a brush hog tonight so it is time to pull the backhoe from my L39 for the first time. The machine has ~600 hours on it and I doubt the hoe has ever been off. For some reason the task looks a bit ominous. Any tips/tricks from those experienced? ac

I have a Kubota L39 with Backhoe that I bought used. Unfortunately the 3 point assembly is missing from the tractor and none of the generic stuff from tractor supply, etc. fits the L39. Local Kubota dealer wants $1600 for the parts that should cost $300. Anybody know where I buy the 3 point...

I want to add rear remote hydraulics to my Kubota L39 to run a thumb. I am trying to grasp the addition of a valve to the system. From what I have read I want a 2way valve with power beyond. There will be 5 hoses that connect to this. 2 will go to the hydraulic cylinder 1 will be the high...

1st time poster and 1st time tractor owner. I just picked up a Kubota L39 TLB last Saturday. I only have 2 hours seat time so far and it was great. I moved a couple of 6 ft high piles of snow back, tried scraping the gravel driveway in float with the FEL. Then I backed up to a snowbank...

Yanmar- Smallest tractor with real Cat 1 3pt in Alaska for remote island cabin trail and site prep. Equipped with FEL and 3pt backhoe. Kubota L39 TLB in Tennessee on 143 acres with 6' Bush Hog, 6' Box Blade & post driver. Thanks in advance for all the good input. Cold Camel

I just sold my dx45 tractor and looking for a different one. My wife and I decided to get a zero turn mower instead of a deck on a tractor. So now that I don't need a tractor to cut grass, just brush mow till and do loader work. I have to decide witch will work best. I looked at a L39 with 250...

I am possibly buying a 2005 L39 with 658 hours for $23,695. Is this a good deal and are the hours considered low or medium? How many hours does a tractor like this usually last with typical maintenance. Thanks, Weather25

Hello< First Thank you in advance for responding to my post. Im trying to help my neighbor firgure out his loader problem. after using the pallet forks the now do not retract evenly the silver rods coming out of the cylinder is unequal when in the retracted position. they do not appear...

I am buying an L39 with the GST transmission. I was wondering if you can shift into forward or reverse from a stop without pressing the clutch? Also the dealer said something about being able to use the brakes to turn the machine more quickly. Does anyone have any information on this...

Hi guys! Just a hello to everyone out there that also owns a Kubota L39 TLB. I am a new proud owner of a 2006 L39 TLB with a mere 410 hours on it. I was lucky to stumble onto this deal from a fellow in Bend Oregon. The unit is in very good condition and just had the complete 400 hour service...

OK, I am a newbe here...so be kind. I have a Kubota L39, love the thing but want to now venture out using other impliments. However, I am a bit intimidated by the thought of disconecting the backhoe from the tractor in preporation of using the three point hitch. Can anyone confirm or calm my...

Hey gents looking for a hard cab for my L39 any suggestions links????

WOW, I was looking into getting a 60" Root Grapple & 42" Pallet Fork deal from Wildkat delivered for around 2K. I'm almost sick of reading about Grapples!!! but great info out here!! After reading I'm now seriously thinking of calling Markham & see what deal I can get on the 48" LD Grapple &...

I have had my L39 for about a year now. Over the summer I had to dig a 1250 foot long water line ditch to my house. 2' wide x 3' deep. After buying my machine I had a little buyers remorse thinking maybe I should have bought a skid steer and mini excavator. I really can't say enough good about...

Recently purchased a used Kubota L39 TLB. It came with a 12" rear bucket. I need a minimum 18" for my digging. Would prefer a used bucket but may have to buy a new one. Where should I go? Bill in San Antonio bjtiller@aol.com

After my last round of filling potholes and spreading gravel on a driveway I decided that adding a top and tilt (TNT) system to adjust the box scraper would be a good idea. This would also involve adding rear remote hydraulic ports to my Kubota L39. I had hoped to use the backhoe ports but...

I'm embarrassed to say that I've forgotten the exact details Kubota provides to install the BT1000 backhoe on a L39. When we moved to Maine I misplaced the manual. I'm sure I can get in installed, but wondering if anybody could hit me with the steps from the manual. Thanks.

$22 from local Kubota dealer for oil filter. That's crazy high. Anybody have cross reference information for Fram, Baldwin, etc?:)

Hey guys, never posted here before but have been reading alot of reviews and seems like alot of people have received alot of help so i was hoping you guys could help me. I have a kubota L3940 and am looking to upgrade to a tlb. I have looked at many of them and have narrowed it down to the...

In talking with my Kubota dealer last fall he stated that Kubota was coming out with their own add on thumb for the L39. Anybody hear anything about such a thing?

I been thinking about tradeing up to a New L39. I just like the fetures it has. I been talking to the dealer about tradeing my JD 2520 in for one. i have not got to serious yet , cause i heard a rumor. the 08 L39 might have a few more HP. Has anyone heard this? or about any changes. also ...

Has anybody installed a gearmore tnt to a L39? looking for a hydraulic schematic or maybe pics. Thank you

Any new/old ideas for adding a toolbox to an L39? I've seen a chainsaw strapped to the ROPS but I'd love to see something enclosed in an out of the way spot! We want to add some storage for basic tools and/or chains while out in the "back 40". Maybe with some help won't have to re-invent the...

My dealer told me about a month ago that Kubota was coming out with a thumb for the L-39 this month. Anyone else heard this or have any info?

Has anyone adjusted the hyd pressure on a kubota l39 tlb? if so how and what results did you get? just wondering what if any results were possible with a slight adjustment without hurting anything on the tractor.

Has anyone outthere turned up the hyd pressure on a l39 kubota? if so how and what results did you get? I got the 4n1 bucket from root grapple yesterday and it works great. unbeatable quaility for the price. I also bought the pallet forks from the same dealer last year and for $500.00...

I have a L39 arriving Friday and I am a novice backhoe operator. In fact, I have never completed a task with a backhoe. I really want to be a safe operator and want advice about how to work with the backhoe. Suggestions on safety, operating tips regarding this model would be greatly welcomed...

I am trying to find a company that may sell a cab to fit an L39, it's used for snow removal in the winter. I would also like to build a cleanup blade that would go over the digging fingers of the backhoe, I am a welder/fabricator and am confident it could be done but would welcome any input-thanks

After +90 hours my L39 is starting to look kike a rental machine. I am pushing it the same way I push my little B7200 Bota, and this makes me question my sanity, as I do rally care if I break this $40K with implements machine. Within the first few hour of use of my new Borgford grapple I...

hi, we have a 100 acre ranch in northern california that will require irrigation work, tree planting, road grading, mowing, fence construction. need one "do all" tool without having to buy three different tractors. we'll be working maybe 20-40 of the 100 acres, as the rest is in timber...

i AM CONSIDERING A kUBOTA l39. iT HAS A BACKHOE AND ROOF ETC STANDARD. aLSO A HYDRO TRANSMISSION.|Anyone know a rough price for them? Thanks ALLAN

I currently have an L2350 and a 4690 Backhoe. I will admit once you get the two together its very easy to operate, however i know that it is pretty limited to applications because of strength. Plus putting it on is a trick, sometimes are harder than others. I have been looking strongly...

This weekend I used my new L39 TLB to remove a medium small size stump with the BH and used the TL 1000 FEL to grade the driveway and move some rocks and dirt. My other tractor is a tiny 1983 B7200. I have about 500 Lbs of steel plate attached to the loader frame and the relief valve on the...

Kubota L39 and JD TLB 110\'s Even though the inventory of L39's is very low, my dealer managed to get some in, sort of. He has them sold. On the other side, he has 6 brand new JD TLB 110's. JD has either really caught up on the manufactuering side or they are not selling quite as fast as they...

I currently have an L2350 with a 3 point backhoe, a 4690 i beleive. I am debating on upgrading to an L39. One question i have, is it easier to get the backhoe off and on a TLB than it is on my machine? Its a real chore putting the backhoe on. Thanks for any responses. Elvis

I know L39s are unavailable at this time, but considering the specs..... How do you think a L3830 with a Bradco 509 would compare in real working conditions to a new L39 (digging roads, tenches and stumps)? I enjoy my 3830, but I'm serioulsy looking at at L39. The reason is, the Bradco hoe is...

Has anyone heard when the new L39's will be available? Jon

Anybody seeing any prices yet on the new 05' L-39?? Sure looks sweet...

WOW!!! I saw literature today of the new Kubota L39 tractor loader backhoe!! It looks awesome!!!! The machine looks almost exactly the same as the John Deere 110TLB only painted orange (my preferred color). The design and layout of the instrument panel is also the same as the John Deere 110...