kubota b21

I'm contemplating upgrading from my B7100HST. My B7100HST is a late-model (I'm told by PO '98) with a Woods DuAl 145 quick-detach loader. I have brand-new turf tires and wheels on it, plus the original tall & narrow-style R1's. I love the B7100HST, but there are two things I feel it...

I have been trying to figure out how to removed the backhoe on my B21. I noticed that a worn away sticker contained partial instructions. A local rental place let me take pictures of the instruction sticker on their B21. I hope this will help others. Removal Installation From the...

hi,im looking at a b2150 4x4,hydrostat,with belly mower,and has bisteer.the tractor has 1200 hrs on it and is in good condition.owner is asking $6000 for it.does this seem like a fair price?

While torn down to replace the axle housing on my 2150, I decided to work on the loose steering. I replaced the worn rubber bushing on the steering wheel shaft, but still have a lot of left to right play before the pitman arm moves. There is a large adjustment screw with a lock nut on the...

So I have had this unit for 13 years and it was old when I got it. Over the years it has lost the ability to lift the bucket when it is fully loaded without increasing the RPM and waiting a long time. I thought that it may have been the pump mounted on the PTO on the front. I found that they...

I snagged a concrete pipe from one end while pulling a boxblade, which cracked the left rear axle housing on my Kubota B2150HSD. The hairline crack is located in the housing between where the lift arm pin is bolted on and the axle housing area. The crack is so fine it took a while to locate...

WANTED repair manual 93 b2150 gear kubota Anyone have one they would like to sell. Thanks

New to forum ,i removed the cover for shift lever and found a broken fork for the reverse gear. Does anyone know how to remove the shaft so the fork can be replaced?

What is a 1993 B2150 Hst with 1350 hours great bent front end loader, and 72in mmm worth? Tractor is in very good shape new tires on front some wear on rear one. no problems with tractor. Paint good also. Any price ideas? Thanks in advance!

Was pushing snow off our driveway (200 yds gravel through forest) when bizarre weather conditions (ice+snow+freezing rain) created a new situation: B-21 sliding slowly backwards, spinning downhill into snow bank. Tried to get it out but lost light and freezing rain drove us indoors until...

Someone please tell me if forks for a B2150 would fit a B7800. The B7800 doesn't have quick connect bucket. Thanks.

I have a B7100 4WD with a B-219 loader. The lever on the control valve which operates the bucket angle is seized solid; the up-down lever works fine. I can't seem to find a part number for the valve. Can any 2-spool valve be used? Does anyone have experience of repairing the original valve or...

I found this video on removing the BX24 backhoe YouTube - Removing the Kubota BX24 backhoe is B21 backhoe removal similar?

I use 4wd on my B21 on a regular basis, but I haven't been tractoring much since the remodel on the house started. I recently noticed that after taking the tractor out of 4wd, (and driving it for 20-50 feet) the front end makes a bit of a clunking sound, like if the front end disengaged under...

The tires are worn, would guess they are original and some hoses are rough. What do you guys think would be fair price?

Hello, Recently my 2150 developed a 2 part problem that I do not understand. Previously when I turned the key to off the engine would shut down. It no longer does that. So I can use the fuel cut off lever. But after pulling the fuel cut off lever (and resetting it) the tractor no longer wants...

I'm looking for information on where to order or purchase a toothbar for my B2150. I am loacated in the central area of the lower pennisula of Michigan.

I recently bought what was represented to me as a B2150HST. However, on the transmission is a tag designating it as a B7100HST-D, 4 cycle, 3 cylinder. The engine is a 4 cylinder. Any comments would be welcome. Thanks, Terry

Can anyone provide information or comments on adding a back hoe to a B2150HST. Compatable model or make info would be appreciated? Thanks, thl

Can anyone tell me what the aftermarket equivalent would be for a headlight bulb for a B2150HST circa 1992? Perhaps a Wagner Part Number for instance?

My B2150HST is not charging properly. I disconected the dynamo and tested the AC voltage. It is charging at 15.5VAC. Output at the battery is 12.33DC. The trouble light on the panel is lit. I suspect the regulator is bad. Any comments would be welcome. Thanks, Terry

I recently picked up a B2150 HSD with turf tires. The fronts are 24X8.5-12 and I had a leaking stem. I brought it to my local tire store to get the stem replaced. This rim is the type that has bolts holding the 2 halfs together. They told me the rim had to be seperated to get a new stem in...

Skip loader control valve very touchy and quick. Operatiing on rough ground with a loaded bucket can be a rodeo. Could use some advice on slowing the hydraulics down. 3 point lift is fine but that control ( under the seat ) is for that only. Help ???

Looking at house with 12 acres and they have a hydro B2150 w/374 hours, LA350 loader and Brush Hog that could be included. Not sure of the year, dent in the front edge of the hood and the exhaust is bent back about 45 degrees. Any suggestions on the value the little Kubota adds to the...

the kubota B2150 HST's transmission filter has a 1 1/16" hole and i can not find a OEM replacement filter to buy.... the purolator 1A is the same physical size but the Purolator hole is 3/4", ditto a Fram... the kubota tranny filter, if bought at the kubota dealer runs $30 some dollars...

I came across this 1998 Kubota B21 TLB this summer, and I bought it as an interesting repair project. It was owned by a small water company, which took good care of it, having frequent maintenance done at the Kubota dealer. It seems to have been stored inside and greased frequently. This...

Hi. Before I dropped my mower for the winter season, I wanted to mow the grass one last time in the front of the house. I have a B2150 with about 500 hours on it and was using a belly mower. I started losing power rapidly and almost came to a complete stall. It sounded like I had run over...

I've bought an old B21, only 21 gross HP but with all the torque multiplication going on and 4-wheel drive just how much pulling power can this small tractor develope? I finished digging a rather big stump loose yesterday, now the stump which weighs more than the hoe can lift is going to have to...

I'm looking to buy a small used backhoe/loader, a local Kubota dealer has a used B21 model with 1950 hr's on it, I don't know the age but looks like a early model, it runs and drives good, the backhoe is pretty tight, but the paint is pretty faded, it's a little rusty in spots, some of the hyd...

Hello - I'm new to the forum - so thanks for reading. I was running my Kubota B21 this weekend and just finished with the backhoe - I turned the seat back and all of a suddon the hydrolics all wouldn't work and the machine was running stressed. All componenents would release but wouldn't move...

I just added a B21 to my stable. Currently looking for PDF-type manuals. Anyone know where the tractor serial # is located? I acquired this tractor partially disassembled, but a tire date stamp indicates it is prob a 97 or 98 model. I think they were made from mid-90s to 2006.

I am comparing the possibility of a B21 or a B7800 with a 7' Woods backhoe. I have only spoken on the phone with the sales person. We haven't sat down to discuss the various Woods backhoe options available. Could someone please clarify the various Woods backhoe options for a B7800 basing your...

My neighbor has a "98 B2150 with a loader for sale. He's asking $8500. Asumming good maintanance, can a machine like this last well beyond the 2000 hours this unit has on it? Thanks, Rusty

Just bought a rental unit that has not used the 3 point likey. I disconnected backhole and pulled up hydrolic diverter lever and connected back hose loop. no pickup pressure on 3 point arms. Any ideas ?

Just bought a rental unit that has not used the 3 point likey. I disconnected backhole and pulled up hydrolic diverter lever and connected back hose loop. no pickup pressure on 3 point arms. Any ideas ?

my fel is really sluggish and i think its cuz of the front pto belt being loose. i keep staring at it and i cant figure how to tighten it------------anyone know?

I know of a 1994 B2150 for sale. I haven't seen it up front but may later this week. I know the following details : 4 cyl diesel, 24 HP 4 WD loader turf tires cab approx. 2700 hours supposedly in very good condition they are asking $13,900 ( Canadian). Is this number of hours a concern ...

There is 2004 Kubota B21 with 175 hours for sale in my area for $14,500. I'm new to the tractor world. Basically I am looking for medium-duty tractor landscaping, ditching french drains, excavating a 25' x 50' area for a greenhouse in my rocky New England backyard. What should I be asking of the...

I purchased a used B21 several months ago and now have a need to remove the backhoe. I have read the manual and understand how it should come off, but it appears that it has never been off before and everything (including the spring pins) are frozen solid. I have starting soaking all of the...

would like information on repair vs. replacement of the control for the front end loader. mine has worn seal(s) on the bucket roll and has no scooping power. the dealer has told me the only solution is to replace the entire unit. is this so?

My neighbor owns a B2150 with 3 range hydro and 540/748 PTO. When the clutch pedal is depressed, it sounds as if a clutch release bearing (or maybe flywheel pilot bearing) is is going out. It is a loud metal "ringing" type noise. As this has a hydro, would it have a single-stage clutch with a...

What is a fair price for this Kubota B2150? It is a hydo with four wheel drive? It comes as is from an auction as is with 5000 hours. The box blade comes with the tractor The battery is dead so I could not hear it run. What is the correct process to start tractor?

owning-ML-890978-ML- Kubota specific.

looks like a bearing in my b2150 alternator has seized. Is it possible to have the bearing replaced or should I just replace the whole thing? Any suggestions for where to get one for a reasonable price? It seems I read some time ago about an alternator upgrade. Anyone know if that's still...

I've determined with all of your help that my loader is a B219. I'm trying to locate an operators manual for it. In the mean time can any one tell me how to check the hydraulic oil level. The oil is stored in the right vertical frame post but there is no dip stick. There is a small amount of...

I finally made the plunge and purchased a used B21 TLB with 780 hrs for $15,000, so far I am very pleased. I have put about 4 hours on it playing with stumps and digging ditches, I have figured everything out from the labels (owner's manual is on order) and the only question is the what does the...

Kubota B21 vs Kioti CK20 TLB\'s? So, I have narrowed down the tow which most people cosider to be the best choices in the TLB range. Now, for a construction company, which doesn't have to play a part in the descision, which of these two is the overall better? I know Kubota's reliability, so...

In order to get a sense of whether a new BX24 would suit my purposes, I'm considering renting a B21 TLB for a day and running it through the various tasks I want a tractor to do on my property. Are there any substantial differences that a novice like myself would notice between these two...

Hello, New to this website but found it thru some recommendations of friends. I am looking to purchase a compact tractor. I am staying in the used market for now mainly because I don't want to take out a loan. I drove by a local dealer and he has a Kubota B2150 there with mid mount mower...

Anyone have an opinion on a price for a 1993 Kubota B2150 with a LA 350 loader and 6 foot back blade. This is a gear model about 450 hours everything works, light rusting. What would be a fair price, I'm checkiing it out this weekend.

B2150 Won\'t start I have a problem with my B2150 in that it will crank, but not start. I was running it and stopped for lunch. It has run fine for about 8 years with no problems. It has about 300 hrs on it. I went to start it after lunch and it would just crank. No smoke, no ignition , just...

I'm a relative newbie to the tractor world, other than toying with the idea of getting one for a couple years, and having a little experience operating FELs and BHs. It's time to make the move. I have 5+ acres, 3 or 4 horses, need to regrade and expand the riding ring, dig some trenches (a...

owning-ML-743094-ML- Posted in wrong forum

Need some help trying to figure out why my tractor won't shift in high range. I think something may be wrong with the shifting fork. All help would be appreciated.Thanks

B21 TLB what are it\'s pto limitations? I am thinking of a B21 for landscape purposes but will also want to use some 3 point attachments. I will likely want to use a bushhog, boxblade, and hopefully a Harley Rake. I fear the latter may exceed the ability of the unit. Anyone with experience...

My oil level was high so I changed the oil and filter now the oil is high again and my radiator is losing antifreeze. I assume the AF is the cause of my hi level. Now my question is this the head gasket or worse? There is no overheating tractor runs fine.It did overheat when the fan belt broke...

Hello Members, My wife & I just purchased a home with 6 acres of pasture & mixed hardwood forest land. Gently sloping with gravel roads & no fencing yet. Our main use for the tractor is basic: > Gravel & Dirt movement > Road maintenance > work in our fruit tree orchard and in our blueberry...

We have a problem with our steering unit on our B2150. When you try to turn more than 15 degrees from straight ahead, the steering binds up. If you lift the wheels up and put them back down at full lock, you can easily take it back to center, but as soon as you get to the 15 degrees the other...

Hello there all! I am new of course and looking forward to learning a lot here! I bought a used B2150 in January and I find myself coveting a loader for it. I have looked at many: Koyker (which won't fit my tractor), Helpmate, Accutech, etc. Does anyone have experience with these loaders...

Well after my experience in almost buying a B20 I went back searching real hard for a B21. (not a easy machine to find)The B21 I found is at a Kubota Dealership with 995 hours and they were using it for a demo and a rental unit. Now I know that I am supposed to be a cautious about rental units...

I made it! Imported a used B21TLB (2003, 420 hrs) from US to Sweden. The EU market for compact tractors with hoes is quite limited. And the prices are much higher than the US prices. So importing did not seem to be a bad idea. I found the machine at Carver Equipment, Dunn NC, and contacted...

A friend is looking to buy a 4WD B2150HSD with a FEL. I don't know the production year or the S/N to look it up. It has 2335 hrs. and the asking price is $8500. The tractor appears to be in a fair to good condition. Take a look please. What do y'all think, good price? Thanks, bucky4

Hello, looking for a tree shear lite enough to mount on a B21?

Looking at a used b2150 with hst 4cyl. Because of its age (91)I am concerned that I may not be able to buy a fel for it as it does not have one. Also was wondering if anyone can share their thoughts about the tractor? Is it a good strong dependable unit, or should I stay away? It has 950hrs on...

I would like to increase the headlight bulbs in my B2150 to 25 or 35 watt range, replacing the 12v 15/15w originals. The original bulbs seem to be a rare type and not easily located locally. Can someone please help me find this type bulb in the 25 watt range in either a Kubota part or other...

I just picked up a b21 and read in the manual that you should not add ballast. Any reason you can think of why they would not want you to do this? Has anybody added ballast and had problems? I really could use the extra weight especially since my land is mostly sloped. Any other ideas to limit...

I found a Kubota B2150 with a 72" mid mower for $7,500. There doesn't appear to be any problems with it, is this a good price? Thanks Flymutt

Newbie to the Board, but have learned much from lurking and absorbing the knowledge that many of you have. Thinking of getting a B21 with Loader and have several questions. Will the PTO speed operate a post hole digger effectively? Will the PTO HP operate my 4' Bush Hog Squealer in light brush...

Can anyone give me a sense of what's a fair price for a used B21 with loader and BH? It's a model year 2000 with approx 400 hrs, privately owned by one person. Thanks

Does anybody know of any other tractors that are similar to a Kubota B21 TLB? Thanks, Jim

Any thoughts on these two machines? I'm torn between the two. The B21 only has 21hp but it appears to be a heavier duty rig with great flow from the pump?

are there specs for the b2150 onlinre anywhere? I'm most interested in hp (gross/pto), dimensions, and weight. Also, any idea on what it would cost to add a loader to one of these tractors?

Hello, all. New here. Having a bad time trying to get this posted. I hope I haven't screwed it up. My B2150 HST 4x4 with power steering gets hot over about 30 minutes when operating a 60" PTO finish mower (or any other implement I have) at creeping speed. Always has. Anyone else have this...

Have a steering box that needs rebuilt or replaced. No adjustment left and still toooo much play. Any one have experience in rebuilding the steering box....or is it not worth the effort??????

buykubota-ML-395981-ML- Please don't post brand-specific pricing questions in the general forums.

Would like your opinion what is a good price for this tractor: Kubota B2150HSD with Loader, 60 inch mid-mount mower, Bi-Steer and 900 hours. Seems to be in good condition. Orignial owner. I have an offer to buy this tractor for about $10,000. Thanks

buykubota-ML-394950-ML- Please don't post brand-specific pricing questions in the general forums.

I found a B21 loader/hoe with just over 400 hrs for $14,000 Is that good,what price should it be? How long does the hydro last on these? thank you.

I have a 2150 2 wheel drive, FEL, BH, box, rotary cutter. It has turf tires, and I was looking to get a set of r4 tires and rims, for better traction, and thinking to put liquid in the rears to add stability for some grading on 20% hill. Dealer here in Southeast VA says that he can not find...

I'm needing a trailer for my ATV's and my friend told me about an auction he read about in the paper that had a Hurst 16' trailer that I was going to go bid on. Anyways, there is also a 1997 Kubota B-21 with Kubota front and rear buckets with Kubota fiberglass canopy. The picture looked nice...

Kubota B21\'s I was riding around today and noticed a Kubota B21 that looked nice. It had a BH on it and everything. Can anyone tell me what size of tractor this is compared to the B7500, which I own. It looks a little bigger than mine. Donny

I have a 1/4" hole in my rear turf tire for my B2150 4WD(calcium filled). I asked the repair facility to patch and tube. I was told that the inside of the tire has a 4" slice through the cords and that the patch/tube won't hold. Does this sound correct and if so what is the best price I can...

Hi, I am getting ready to purchase a rotary mower for my B2150 - just not sure what size to get - a 4' or 5'? I understand the advantages of a 5' as it will go past the rear tire width and allow me to mow close to fences and mow beyond the tires. My concern is that I live where it is very...

Well, I found a B2150 and was interested in buying it until I realized it does not have power steering. I was a bit surprised as I remember reading somewhere that B2150's with 4wd have power steering as a standard option. Anyway, does anyone have any idea on what is exactly needed to add this...

I am considering purchasing a 1997 B2150 with 450 hrs. The dealer is offering me a package deal with either a Woods 1006 or the Kubota LA350 loader. The LA350 will cost me $1000 more than the Woods 1006. I read several threads regarding Woods and OEM loaders and I understand the OEM...

Hi folks, I have a Kabota B2150 HST. The hand throttle, which has been stiff for some time, will not rotate to allow me to set an engine speed. It is stuck at idle although I can reach down and hand operate the linkage that goes to the engine. The linkage system looks very simple with a rod...

Saw a 1999 B2150 hydro with fel and scraper for 11,800...is that fair price?....it's got about 260 hrs. -s-

I've been looking into the bx22, but am concerned that it might not have the weight and power to handle some of the jobs I've got lined up, including some riprap work, trenching in rocky soil, stump removal, etc. I can't afford a larger tractor, fel, backhoe new, so... as a possible...

Hi everybody, New poster, been reading for a while though. I am tentatively purchasing a 1999 B21 from a JD dealer. When I was trying it out (the first time using a B21), digging a hole with the backhoe, I notice that I couldn't curl the bucket and the dipper while pulling in the boom. Such...

I'm thinking that someone must have done this already and could give me some pointers? I have a 1992 B2150DT with a factory loader. I got an email from TractorSmart when I asked about a rear hydraulic kit that suggests the loader has taken the only available hydraulic outlet on the tractor...

Well, although I have not been active on the forum for a while I have been working with the tractor. I took these photos and have been meaning to post them for some time now but have only just got round to it. This first photo shows the backhoe uprooting Bog Myrtle. I have tied rope around the...

The mower lifting mechanism on my B2150 needs adjusted every year. Each spring, when I mount the mower (RC-72B), I have to adjust the turnbuckles to get the mower back up to the bumper blocks. As the year progresses, the gap between the mower and the bumper bocks grows from the 1/16" I set it...

I recently bought a 1992 B2150 with 4wd, a LA350 FEL and 6 ft. Woods backhoe. Condition is good, 825 hrs.,9 speed gear transmission (I wish it were hydro.). Is $12,500 a fair price? Also, how do I center the steering wheel? I removed the nut in the center, but could not get the wheel off.

I found a used B21 with 800 hr about 2000 miles from home. There is a Kubota dealer about 30 miles from home. Total cost for the tractor and transportation is about $13,000. I also looked at a new Kioti DK35 at a dealer about 130 miles from home. Total cost for TLB about $23,000 plus tax...

The manual for my b2150 says that to engage cruise control you stay in low or mid range, move the small lever below the steering wheel to “on”, have the machine traveling at the desired speed, then engage the cruise with the long lever to the left of the steering wheel. When I try this the long...

Does anyone have rear remotes on their Kubota B2150? Does anyone know what parts are required?

I took the loader (la350a) off the machine for the first time this weekend. Never thought to check to see if the Color-coding on the hydraulic hoses had a matching color on the valve. When I went to reattach the loader and connect the hoses I found no color codes on the valve. Can anyone tell me...

I have purchased a 4690 Backhoe ($4000) for use on my B2150 with a front end loader. In addition, I have just bought the upper bracket that those on this forum advised me to do. But ......., I'm curious to know if anyone else has the same combination of tractor/backhoe and if there are any...

Looking for used B21, or possibly a B20 in very good to excellent condition. I'm in Eastern Ontario but will consider anything within a days drive, so northern New York, Vermont etc may be considered. Thanks!

Has anyone else out there had problems with leaking front axle seals. This tractor is a B2150 HST 4wheel drive. The seals leak right at the Steering Gear Box junction?? Replaced the left side with 510 hours and now the right side 50 hours later.

Seems a lot of good chatter about the BX22. Just how do they compare to a B20/B21. I'm looking at a used B21 for about the same price as a new BX22 (you can see my earlier post re the B21 for details,) and am now wondering if perhaps a new BX22 would be just as rugged and durable? Thanks in...

Like many I'm about to do what many have wanted to (In other words the wife has said ok...) and am looking at picking up a TLB. Seems I started out looking at older smaller units and like everything else I'm up to looking at newer and "better" , in my case a B21. I've got a small acrage, 5...

I finally got round to taking some photos of my recent purchase. Picture didn't upload...will try again!

Well I finally did it. Yesterday I took delivery of my first toy after 2 years of lurking within this group. It’s a 1998 b2150HSD with a LA350 loader, 6’ landpride blade, and 10 hours on the clock (yes 10 hours, the dimples are still on the tires and the loader is hardly scratched) that I bought...

Comments please. I just purchased a used B2150 for $11,000 with LA350 loader & 72" belly mower. 1995 with 423 hours. Did I do well or is this about the right price? It's really clean, probably kept inside. Thanks for all replies

Help please guys! This may seem a very strange post . On Saturday my B2150 HST FEL/BH will be arriving , as you will know from my previous posts I have not seen it yet. I also have never driven a tractor - apart from moving one a few yards. I ordered an operators manual from the local Kubota...

I have found out the serial number of my - soon to arrive - B2150. Can anyone tell me what year it is please? I don't know if it makes any difference but it is the UK market. The number is 52489. Should be arriving Saturday . Regards

New to tractors. Given price of $17,000 on 1993 B2150 Kubota 4WD loader/backhoe combo. 249hrs. Ag-Tires. Machine in like new condition. To much or in the right price range? Thanks in advance...

What would be a good price on a tractor with the follow characteristics: B2150, 4x4, Hydrostatic, 163hr., Garage Kept, with Befco 5’ finish mower and Woods 5’ Blade. Don’t know the type of tires or the Befco model yet. Any ideas?

I am trying to find out a price for transporting a B2150 with FEL and backhoe. I know roughly the weight of the tractor but not with the attachments, anyone any ideas please? Thanks in advance

Considering buying a used B21 TLB with 850hrs slightly beat up for $14,500 or a used B2710 w/loader for $12,500 100hr looks like new (just out of warranty) To be used on 10acre property to move dirt stone and cut a field once or twice a year. Which tractor do you think would better suit task...

Does anyone know the front to rear wieght distribution of a B2150 hydro 4x4? Thanks

I have spoken to a non-franchised dealer about a Kubota B2150 tractor. It is 4 wheel drive, hydro trans, with a FEL and backhoe, it has 1000 hours on it and is in good condition. As the dealer is over 500 miles away it is very difficult for me to go and see it. He did say that if I bought it...

I am looking at a used B21 and a B20 with similar hours. The B20 is $2500 cheaper. Is there any advantage of the B 21 over the B 20? Thanks

Is there anyone who has experience of both machines who can give an unbiased opinion. I have been on the lookout for a Kubota b2150 for some time (there are two dealers nearby). I have been offered several JD 855's in good condition (no dealer for 100+ miles). I should point out that they are...

A FRIEND OF MINE HAS A B21 WITH FEL AND BACKHOE. I LIKE THE SIZE OF THIS TRACTOR BUT I DON'T NEED THE BACKHOE OR THE FEL. DOES ANY ONE KNOW IF YOU CAN BUY JUST THE BARE TRACTOR ??? ALL THE ONE'S I HAVE FOUND HAVE THE FEL. OR DO I HAVE TO LOOK AT ANOTHER MODEL?? THANK'S WOODY

I'm about to change the fluid in the hydrostatic transmission of my B2150. I have never done this before, so I studied the manual pretty carefully. My only concern is the size of my drain pan. There are two drain plugs in the bottom the case. My guess is that opening either one will drain...

Quality Farm & Fleet has 10% off all purchases the next three days. Therefore, I can purchase a King Kutter 60" Tiller for $979 less 10%....which is a geat deal. However, after reading extensively in this site I get the impression a 60" tiller may be too much for a B2150 HSD 4x4 with only 18HP...

Hello, I need to buy a 3pt plow to turnover the compost/leaves etc.. on my garden next spring before rototilling. What size plow works well with a B2150 HST w/ Turf tires? The tires are loaded and I have a FEL. The soil is sandy. The owners manual recommends a single 14" or a 2 x 12" plow. What...

The situation that I am about to describe is like finding a brand new 1998 automobile or truck on the lot in late 2001; how much of a price reduction would make it a good deal? Note that this discussion is mainly for academic purposes only; I already have a B2150 and wouldn’t mind upgrading my...

I have a 1996 B-2150 HSD with 300 hours. The owners manual says to replace the hydraulic hoses every 2-3 years (cannot remember the exact time frame). Do they really need to be replaced that often? Should they only be replaced if they are severly worn (from rubbing together)...or do they wear...

New here, wondering if this sounds like a good deal or not. I don't really "need" the backhoe right now... but I'm sure I could find some use for it. Any responses would be appreciated. Thanks

Does anyone know the proper (Best/easiet) way to adjust the brake pedal on a B2150? Actually the parking lever. The brakes work OK when I step on the brakes, but when I set the brake lever to park it, it isn't applying enough pressure on the brake to keep in from rolling. How can I adjust the...

I noticed today in my local equipment trader someone has both the B9200 and B2150 for sale. Each for $3900. The B2150 is a hydrostat, the B9200 needs a clutch. No mowing deck on either one, do they have 3 pt and rear PTO? I think I would rather have a rear mowing device anyway. I am realitively...

newbie ?\'s on a B2150 I just purchased a B2150D (gear-shift 4WD) w/FEL and 5' finish mower. Where can I get a swinging drawbar (besides a dealer)? Also I need turf tires real bad. I know what sizes I need, but where's a good place to get them? I have two more questions, but will start them in...

I have a 1994 B2150HST. I have been using a Kubota filter, part #70000-15241. Stopped by the local dealer whose parts man has quit. I was given a filter which is a bit larger, part # 15241-32093. (Didn't notice till I took old filter off.) Looked in my parts list and found a 15241-3209 that...

Hi everyone I`m considering a purchase of a tractor for awhile now. I`ve gained alot of my present knowledge in these forums. (thanks). But I`m still unsure about what to do. I have 8 acres on a lake in Ct. About 2 acres are landscaped (grass,beachfront,paths,flower beds etc.) Another 2 acres is...

Hi, I have a B2150 with a LA350A loader and have noticed if I park the tractor with the loader raised up off the ground a foot or so, that after a period of time the loader drops down to the ground. It might take 4 hours or so, but it drops. I feel that there might be some sort of "leak" in a...

I bought a new B21 TLB and have 28 hrs on it now, well taken care of and never used for much more than moving sand around and backhoe for a few stumps, some snow removal ect. The B21 can barely lift a heaped bucket of sand and a few times it would'nt lift a heaped bucket of sand but the backhoe...

I wonder if anybody knows what tyre sizes (Turf and Agri) were specified for older B2150s. I ask because our new B2150 bought last spring has turf tyres which seem larger than I remembered from using B2150s a few years ago. The agri tyres seem about right and 4wd/bi-speed turn is OK without...

Hi and a happy upcoming new year to all. I've a line on a used B2150HSD (oh how the requisite size of my toy has grown) w/ the Kubota 60" belly mower and LA350 FEL for just under $12k. 400 hours, one owner, stored indoors. Looks good from the pictures so seems like a pretty reasonable price...

The steering on my B 2150 has suddenly loosened up to the point where there is 3-4" of free play. The arm coming out of the steering box responds to small movements of the wheel but barely moves. Also the steering column seems to have come loose so that it can be wiggled around a bit. I tried...

Seems that the peddle that controls f&R movement on my B 2150 does not fully return to neutral when you remove your foot. I have to give it a little rearward nudge to fully stop forward travel. Any ideas? Thanks

I was curious about getting a B series. I was thinking of getting a B2710 R4 tires front loader and adding the Woods 7500 backhoe. Is the B21 a better-stronger workhorse for mainly loader and backhoe work or should the B2710 out perform as it has more horsepower? Physically which tractor...

I was curious about getting a B series. I was thinking of getting a B2710 R4 tires front loader and adding the Woods 7500 backhoe. Is the B21 a better-stronger workhorse for mainly loader and backhoe work or should the B2710 out perform as it has more horsepower? Physically which tractor is...

I'm looking at buying a used B2150 HSD. What size bush hog, rake, box blade, tiller, and grader blade will this tractor handle?

Heres the deal I've been offered: 97 B2150 Hydro with loader, 450 hours, turf tires, $10,000.00. Now the bad news, its a rental unit. Is this a good price?

Can someone tell me the intake and exhaust valve clearances on my b2150 . thanks

Goodbye ol\' B2150 Took the plunge and bought a new B2910 with loader Saturday. It will be coming Tuesday afternoon. I have had a B2150 with a loader for the past 5 years and have loved it. Even with my love of the Kubota I still shopped everything else for the past few months and really...

Please help! Please don't laugh! I' afraid they do not make tractors women friendly. I am trying to check the oil on a B2150 and can not find the dip stick. Please help me locate it. Thanks for your help.

I have reasonably steep slopes on my property and prefer using the seat belt. On my B2150, I put the seat belt on an tighten it up only to have it loosen itself completely in less than 5 to 10 minutes, depending on what I'm doing. The belts visually appear to be in excellent condition. Has...

Has anyone tried relocating the exhaust stack on the 2150? I have a lot of dogwoods with low branches that tend to get caught by the exhaust pipe and then whip me in the face as I continue. Not a very pleasant experience. I could deal with them brushing by my face, but the whipping has gotten...