john deere 3020

Hello-have the 3020 with a rear snowblower, reverse is fast or faster and doesn’t match speed and feed. I’ve seen pictures of a front mount, does anyone have one they could send pictures of? Anyone have one for sale in southern MN area? Another thought - would the gearbox handle the higher rpm...

I purchased a 12v upgrade kit to move away from 24v as my starter was on it's last leg. I followed the kit's instructions and nothing happens. I hooked everything up correctly, I believe. Can you help by watching this video I made outlining what goes where and see if I missed anything? Does...

3020 John Deere has a PTO loud whine only when engaged does this sound normal

3020 Pressure Control Valve (priority valve) Original came on machine R31624R o Hydraulics extremely slow and weak  10 sec or more to raise 3 point  Remotes very slow Spring in valve very weak Installed R40559 o For 3010 s/n range -049,999 o Hydraulics at spec o Extreme amount of chatter...

I'm new the TBN so cut me some slack if I post this to the wrong page. I have a John Deere 3020 s/n 081743 with the following hydraulic issues. Purchased used with several pre owners. 3020 Pressure Control Valve (priority valve) Original came on machine R31624R o Hydraulics extremely slow...

Tractor was running great while brushhogging for about 2 hours then it starts to loose power. The engine is still running great but it slows to a trickle and can hardly make it up a hill. Next day same thing. Any Ideas where to start would be great. thanks

How much bigger of a bucket can I put it on John Deere 3020 and with the loader 48 on it how big of a bucket can I get on it do I have to have it special made for it ? Just wondering

I have a John Deere 3020 gas model I need to take off the loader was wondering where I can get a stand at as a loader 48 on it.

I have a John Deere 3020 gas model. It has a loader 48 on it. Today the loader controls or something went haywire cuz I use the bucket control to tip it forward and it wouldn't tip back and I raise the loader and the loader would not go down let me rephrase that the loader did go down when I had...

Where to find the serial number for 148 loader that's on my John Deere 3020 if you can show me a picture I think it might have fell off but I'm not sure if I still can't find it

All - Looking at a local John Deere dealership at a 1964 John Deere 3020 gas. Spoke with dealership and tractor has spun hour meter (so over 10,000 on whole tractor), but 2000 hours ago tractor had: - rebuilt engine (crankshaft, piston, sleeves) - axle bearing - hydraulic pump - new clutch...

I have a john deere 3020 with the wide front end has two different size tires any one know what size tires supposed to be on it?

Hello! I have JD3020 with approximately 650 hours. Bought it in 2007 (new). I have to confess that I made one of the most stupid mistakes and connected the battery terminals wrong (negative to positive). As soon as I connected the battery terminals the wire from the alternator to the starter...

Was looking to purchase a John Deere 3020 with Year-a-round cab. Anyone happen to know the approx height of this tractor with this cab? Thanks.

I recently purchased a 64 3020 propane. I have only put about 30 hours on it but I am planning on doing a complete fluid change this weekend so I have a good baseline of when everything was changed and to get a better understanding of where everything is. I busted a remote hydraulic line under...

I have a 3020 jd wide ft end gas model how many hydraulic filters does it have and where are they located at.

I have 65 3020 gas w/synchro, I was backing wagon out of shed and went to clutch and stop and it kept going... i was able to smack it outta reverse and now when you go to shift it it grinds the gears. After taking the cover off there is about an inch between throw out and plate...the clutch...

I have a 1965 John Deere 3020. When the tractor runs at a low idle there is a rattling or knocking noise coming from the front of the engine. When I turn the steering wheel it is louder. when I run it at a higher idle it seems to go away. Could this be the hydraulic/steering pump or do I...

I have a 3020 diesel. When I hit the starter button the starter will spin and sounds like it might be trying to engage the ring gear but doesn't. If I hit the button about 10 times it will suddenly turn over and start right up. I thought it might be the solenoid not pushing the drive gear...

Hi Guys, So I have the sway blocks on my JD 3020 but it still allows the lower arms to swing right and left a fair bit. Is there any adjustment anywhere to remove some of that left/right sway? I've got this huge post pounder on there right now and it makes me nervous when it sways. On the...

The bracket on the rear of the tractor where the top link attaches via a pin, won't accept a newer style hydraulic top link because the new style has a larger outer diameter. The hole for the pin is just fine. That bracket attaches with 2 bolts. I have to believe someone has made an adapter...

Hi Guys, I have a 1960's JD 3020 Diesel. I just bought a hydraulic post pounder set up for a closed hydraulic system on a John Deere. I have a lever on my dash that controls the hydraulics at the rear remotes. I do not recall it having a detent to stay in the "on" position. I'm guessing I'm...

Looked on tractor data, owners manual and can't find how much the 3 point will lift. I want to lift one end of a 40 ft. shipping container off the ground and pull it into position where I want it. We will be pushing on the other end with another tractor. I think the container weighs about 8500...

Hi everyone We are having a problem with our old JD3020 tractor. We have had it for years and it has been a great old tractor. The other day the we were using it and drove it home, when we got it in the yard there was smoke coming out of the case near the rear end - it smelled like brakes...

I have a john deere 3020, that I just did a clutch job on in school, and my partners forgot how to wire the starter. does anyone have any info on how to hook up every thing. Thanks

I have 65 jd 3020 gas and have replaced distributor, cap, rotor, condenser, plugs, wires, points to no avail.......It wants to fire when ya fisrt try startn it but if ya don't get it to go then you either pull it or wait an hr or so......Really at wits end any thoughts or advives much needed!!!!

I have a 65 jd 3020 gas that can be a bit of a bear to start and was wanting opinions on what block heater I should look into ? thinking bout circulating canister heater in bottom radiator hose.....Needs to fit my very tight limited budget and not wanting to spend all day on an...

I am do tune-up on my 3020 john deere and replace the cap I was wondering how go and set the points ?

I just bought a 1963 John Deere 3020 gas model and want to change all the fluids and filters before I start using it. I ran into a problem with the air filter element removal. I removed the left side screen and loosened the clamp to remove the dust cup from the bottom of the cleaner body...

Howdy from Calgary, Alberta Canada. I own a 1964 John Deere 3020 tractor and am looking for information on the Zenith carburetors as my tractor's spark plugs need to be changed after every time I use it, which is never more than an hour at a time. This problem as existed for several years and...

When I lower my 3-point on my 3020 diesel as low as it will go it's still a good foot above ground level. I've seen videos of other tractors where the lower arms almost touch the ground. Its hard to hook up some attachments when the arms won't drop low enough. I have to set attachments on...

I recently broke spindle and had to replace it quick....I ended up with JD spindle and found I have a Schwartz front end. I got it together but splines match up but not in same position...which makes me able tp turn hard left but not hard right.....can I switch the steering arm so spines make...

I have 65 jd 3020 gas & upon looking under it and asking I have a mid pto .....my ? is what do I need and what would you recommend for a mid mount sickle bar mower and since I know nothing about the mid mount pto any operational or info is greatfully appreciated......thank you very...

I cannot get the three point hitch to go down = the one lever on the dash is stuck - how do I fix?

I have an old gas 3020. It started up for me after a hard winter, but quickly sputtered dead. Then wouldn't restart....cranked but never engaged. I guessed bad gas, so drained it and put in new gas. Got it started, with a jump, but again it sputtered dead after a few minutes. I've checked...

Hi All, I have a 1960's JD3020 diesel. The manual says its a closed center hydraulic system with a maximum pressure of 2250 PSI. Anyone know how many gallons per minute of hydraulic that these tractors put out?

In the process of buying a 1964 John Deere 3020 with front end loader. When the tractor is sitting at a cold idle there is a tick sound every few seconds in the hydraulics. Sounds like a valve. The noise stops when you use the hydraulics and when the hyd oil warms up. Any ideas what this could...

tractor ran great all summer , then just would not start 1 morn, when hit starter fires up for about 2 seconds then refuses to start. let sit for about 1 hour then will fire up again for asecond or 2 then dies and refuses to start. fuel filter is clean new plugs, good flow from gas tank and...

Got a leaky fitting on a JD 3020. Pretty sure the seal is shot. What parts do I need and how tough is it to replace? Instructions somewhere? On the other fitting, the metal between the balls is cracked, but doesn't affect anything right now. Absolute rookie on this hydraulic stuff, but know...

Got a leaky fitting on a JD 3020. Pretty sure the seal is shot. What parts do I need and how tough is it to replace? Instructions somewhere? On the other fitting, the metal between the balls is cracked, but doesn't affect anything right now. Absolute rookie on this hydraulic stuff, but know how...

I have a 1967 3020 gas tractor. I have installed an electronic ignition. I have re-built the carbeuator. It still fouls the plugs. What can I do?

I have a 1965 gas 3020 that turns over slow to start unless I turn the steering wheel left and right then it turns over at regular speed. Any ideas of how to fix it?

I have a John Deere 3020, not sure of the year. It has AKS-40s-5 Fuel injectors in it. I can't seem to find where to buy them. Local JD dealer says they are not available. Any ideas? Toucan

Hi All Members: New member here looking for information on 3020 & 4020 tractors. Wonder the correct air pressure in 15.5-38 rear tires of a 3020 tractor. Also any member's have experience with renewing, rebuilding, or replacing a fuel tank on a 4020 diesel tractor. Thanks for any assistance.

Hi Guys, I have a JD3020 that I'm trying to narrow up the wheelbase in back by sliding the wheel in on the axle. Never done it before. I loosened the 3 bolts on the outside of the hub, then tightened the 2 jack bolts until one half of the inner wedge broke free. I can now rock the wheel...

we recently bought this jd 3020 it works great only issue we have is it doesnt take the pioneer fittings on our attachments anyone know what type of fitting it takes or if their is an adapter to take pioneer fittings thanks in advance for the onfo

hi all, i have an idea for a project that i want to do. i would like to put a turbo on my 1969 JD 3020 diesel. before i get real serious about this i want to do some research first. i would like any info that i can get my hands on that deals with this subject. i really dont want much hp gain...

Hi all! I am going to repaint my 1969 John Deere 3020. I am going to paint it with original colors and am wondering I what I'm thinking of will look alright or not. Sometime when I was on the Internet I thought I saw some pictures of freshly painted 3020s or 4020s or something with the intake...

Hi, I have a 1969 3020 diesel with the synchro transmission. I am wondering what maintenance I should do if I recently bought it from a private owner and he didn't know what he did to our or didn't do to it. I would assume hydraulic fluid and filter. Engine oil and filter. Fuel filter. Is there...

Hi, I am new to farms and tractors in general but I'm doing y best to learn. I have the general operations of my jd 3020 down however the pto is kinda spotty it'll work for a min then just stop working after the tractor hasbeen running awhile. I was trying to hook up the brushhog when engaging...

Wondering if a Jd 3020 is big enough to pull a 2 yd scraper??

I have recenlty purchased a 3020 gas tractor and i wonder what could be the reason or reasons that the lift arms lever on the dash would bind up and not move at all? And where would the oil, fuel, air, and hyd. filters be on located on the tractor? Thanks Nathan

I have a 1969 John Deere 3020. I went out to try and start it and it just barley turned over. The batteries and pretty much dead. How do I charge them. Do I charge them separately or all at once. Also can I use a charger to jump them to get it running. Give it a boost on cold days?

My 3020 has been leaking from an unknown location for a few months now. I tightened as many fittings as i could see and pressure washed it to see where it's coming from. I know all you guys out there who know what you're talking about like lots of details so I'll do my best :-) the drips seemed...

I am just starting the process but need some directions as some of the local info does not seem to make sense. I have a 3020 jd diesel that has one hydraulic set in the rear and no other connections. I mounted a westendorf loader on the tractor and would like to operate the tractor by joystick...

im looking at buying a 1965 john deere 3020. it has 2800 original hours. im looking for any info on this model and if this is a good buy. its priced for $5000 here is a link of some pictures ImageShack Album - 12 images any info is greatly appreciated! thanks jared

I have a JD 3020,1969 that has had the alt. lite on for over a year now. The batteries are two 6volts in series. one measures 6.4v and the other measures 5.6v . Is there any way to test the alt/reg with a multimeter? and what would cause the alt. lite to stay on if the batteries have been...

I'm looking at buying this 3020 with the loader, seems like a decent deal to me would like input from you guys that have owned or operated this tractor. I'm looking for a tractor mainly for handling hay and to pull a 6' to 8' disk, and shredding.

Hello, Im new here and just bought a house with 30 acres with 16 acres all planted in alfalfa/grass. we have a 6 acres horse pasture so in turn I told the wife its my turn to play and buy some tractors ive wanted my whole life:thumbsup:. Ive been debating there are two tractors for sale around...

I have a JD 3020 with a bad engine - I was wondering what the salvage value would be. I put new rear tires on it 2 years ago & it has a Farmhand bucket

I have a Deere 500A backhoe that I need to service the trans. This is suppose to be the same powershift trans that was on the 3020. Really this is a 3020 with a heavier axle and additional frame to support the hoe and loader. I know there is a sump screen for the transmission I just am not sure...

Hi All, I may pick up a used Wallenstein BX-42 chipper tomorrow. The Wallenstein site doesn't say if its cat 1 or cat 2 but I'm pretty sure its cat 1. My 3020 diesel takes cat 2. I have a farmer friend who said you could buy the stuff to adapt a cat 2 tractor to run a cat 1 implement...

my 1970- 3020 gas, when running at high rpm under load, after about 45-60 min, will sputter and quit. cannot restart it, have to leave it sit about 2 hours before it will start and then the cycle repeats itself. I replaced the fuel filter thinking that was the problem "not". Antifreeze level is...

Can anyone provide me with an assembly diagram of a John Deere 3020 remote cylinder. I bought a seal kit from JD, but it came with no instructions or a parts diagram. Other repair kits I have bought from JD in the past had instructions included in the kit. There appears to be some extra seals in...

Hi All, JD 3020 Diesel When you check the transmission hydraulic fluid level are you supposed to screw the cap on the dipstick all the way down or let it rest on top of the threads? The manual doesn't say one way or the other.

Hi Guys, I just cleaned the oil bath filter on my JD 3020 and was getting ready to put it back together when I noticed that up inside the canister (which the oil bath filter attaches to the bottom of) is another screen. Its full of crud. I tried to figure out some way to pull it out to clean...

Hi All, I have an early model JD 3020 diesel with the 24 volt system. There is a bracket mounted on the side of the starter and there are 2 round objects (what I assume to be circuit breakers) mounted on the bracket with wires going to the solenoid. If those are circuit breakers, is there a...

I have an oil film on both sides of the block. I thought my vavle cover gasket was leaking, but looking closer at it the oil on the plug side is just from the bottom of the head down. Would a head gasket leak oil and have to other problems? Tractor runs fine.

Anyone know where I can get a usable Marvel Scheibler carb for my JD 3020?

Hello everyone, I have an older diesel deere tractor and today a fuel injector started leaking. I can see it pulse as the tractor is running. looks like it leaking out the washer seal. Ok my question, Can I just zip out that bolt put a new seal on and zip it back in ? Are they that...

I blew a hydraulic line. When I replaced the line I drained all of the hyd fluid and replaced it along with a new filter. Now I have a stumble in the FEL. If I run it to full extension a few times the stumble goes away until first start on the next day. When I check the hyd level via the...

Hello everyone. I have an older deere 3020 diesel with standard shift. I have had the tractor since last winter and used it a lot in the hay field this summer. the pto works, the loader works and the remote hyd works fine too. But the other day I went to move the three point hitch...

My gas JD 3020 was running good, but yesterday when I turned the starter on it made a fairly loud thud sound, then just clicking of the solenoid. It has a front loader so access to the starter is tough. First question is: how many bolts hold the starter on, 3 or 4? I can see two ok. Could it...

Hi, A friend has a John Deere 3020 diesel tractor with a 42A front end loader. We need to lift some heavy equipment and needed to know the lift capacity and breakout/curl capacity of the bucket. I did some searches without any luck. If anyone knows the answers to these, I would appreciate...

Anyone know the gpm flow rate for the hydraulic remotes on a JD 3020? My 3020 operator's manual, amazingly and unfortunately does not include this spec. Nothing on TractorData.com either.

Was pondering the idea of replacing the 24V gen w/ a 24V alt. The one I ran across is a GM style 30SI. I don't know much about the 30SI, other then it's GM and internally regulated. (Actually, would a 30SI be too big physically to fit in the location of the gen???) Would retrofitting be as...

can you tell me the equivalent in IH of a Deere 3020 or 4020? thanks

hey yall. have a few questions. in the next couple years i'll be in the market for a bigger tractor. im looking for something along the size of the 3020/4020. im definately looking for a used machine, as farming isnt my main occupation. just need something for bush hogging, maybe a little...

I have a 1969 JD 3020 with a FEL and rear blade that I use for snow removal. The blade has a hydraulic cylinder for side shift. When I warm up the tractor I unplug the cylinder and plug in a pig tail to feed oil in a loop back into the system to help warm up the hydraulic oil. Am I going to hurt...

Has anyone ever ran thier loader using one of the rear remotes? Or is that a bad idea? The tractor is a 1964 standard with two remotes F-11 Farmhand loader It HAD a PTO pump to run the loader. I thought it would be nice to eliminate the pump so I would'nt have to remove the PTO pump each...

What's a usual price range for a 1967 JD 3020 with FEL and 7' Bush Hog rotary? It's the 75 hp diesel. Thanks. JW

Hi fellas. I have a good friend who has a JD 3020 that has a hydraulic fluid leak. It is leaking where the pin goes through the yoke that suports the draft arms. Does anyone know if this can be repaired without splitting the tractor? The tractor is in use now and he hasent had a chance to...

Do any of you Gent's own one of, the old J.D.'s, Such as the 3020? I am interested in "all" feed back about this model. I have located one in, near mint condition. All I know about these machine's now is, they were built from the 60's to the 70's in smaller numbers, two styles of transmission's-...