john deere 2210

Is Deere planning on replacing the 2210 in the near future?

Looking to buy a ~48" tiller for my 2210. Deere suggests the Deere 647 or the Frontier RT1140-1150/RT1240-1250 series. I have also look into the Woods GTC-52. The King Kutter is value priced and well acclaimed by owners. But at 600lbs vs ~400lbs for the others, it may be too heavy. Or is that...

I went to several dealers Saturday. Looked at a BX22-1830, Massey2300 and a JD 2210. The TZ was quoted at $11,271 with 60" MMM. The BX 2230 w/ 60" MMM was $10,145 and the BX 1830 was $9,705 with 54" MMM. The JD 2210 was quoted at $13,999 with 62" MMM, FEL and for Saturday only, a box blade...

I have average skills, do all my own car work I know the oil change is straight forward what about the transmission and filter Anything I should watch out for , any "gotchas"? (other than a big used oil container!) Do I have to take the MMM off ? Thanks

I burn very easily and anticipate spending lots of time on my new 2210 when it arrives this week (likely to be Friday). I've been looking for a hard canopy and have only found one made by Femco specifically for the 2210 (the 2523 ABS Plastic Canopy at the bottom of the page)...

Does the 2210 have them? If so how are they activated? JD dealer didnt seen to know know much about the machine when I was looking at it. Also if plugs how well do they work in -20+. My other dis. I have a 110 volt plug I just plug 20 min before use and Im good, or i add so de-jell. The dealer...

I am a first-time tractor buyer looking for the right compact for my property. I have about 1.5 acres of lawn (more accurately field), and plan on a .25 to .35 acre garden, along with other odd landscaping and planting. I could get away with a small lawn tractor but the tillers one could pull...

I am a first-time tractor buyer looking for the right compact for my property. I have about 1.5 acres of lawn (more accurately field), and plan on a .25 to .35 acre garden, along with other odd landscaping and planting. I could get away with a small lawn tractor but the tillers one could pull...

Hi all, After reading PDe's post about his Woods BH6000 hoe on the JD 2210 I am about sold on one for my 2210. I live in NH and called my local dealer and got a quote for $ 7000. Got another quote for $ 5000 from a northern NH dealer. $ 2k is a big spread. To the folks on the forum that...

Hello, I just got my mid mount mower today for my 2210 John Deere. I put it on and everything. And i have a couple questions. First off, are the wheels on that thing supposed to be locked ridgidly into the forward posisition because whenever i turn it either rips up the lawn or else it scrapes...

Although I have been reading these discussions for some time and have found them very useful and informative, I am a newly registered user and this is my first post. Unfortunately, my registration was prompted by an apparent problem with the rear PTO shaft on my 2003 JD 2210. I decided after...

buyjd-ML-650277-ML- Brand specific. Moved to JD Buying/Pricing forum.

I presently have a JD 455 with 40 loader and 47" snowblower with quick hitch.Dealer offered me a 2210 with fel quick hitch and rear hydralics as I plan to put a woods backhoe on it.My tractor and $4000. is that a decent deal. Would appreciate any advice.

Hi, I'm new here and have been lurking around reading the posts. I have a level 2.5 acres (1.75 pasture) and a 750' gravel drive. I dont need a mower but do need a FEL, box scraper and eventually a tiller. I currently have a '53 Ferguson w/FEL (a royal pain to steer). Anything with power...

Here's what I'm looking at: 2003 John Deere 2210 Tractor/Loader 74 hours 54" MMM Loader (not positive on loader size) Asking price is $11,900 Any thoughts, comments on the price?

I am looking to purchase CUT to take care of 6+ acres of land. 3ac need bush hogged, 2ac mowed and the rest tilled. Looking at spending no more 17k for whole enchilada. I am looking to get the FEL, MMM and Tiller. Any suggestions and anybody know prices that I can work with? Thanks Zac

Thanks to all of you I have now have a 2210 with a FEL Have to read all the literature, but am more than ready to put er to work. Any special precautions on break in period, fluids ect. Rather have real life examples rather than just what the owners manual gives me. Thanks again

I’m new to this forum so have mercy on me. I’m desperate for advice and the 0%/36 month financing deals are soon coming to an end, not to mention the grass already needs mowed. Keep in mind that I’m currently building a house and cost is a serious consideration. I’ve got 7 acres of land. 1.5...

<font color="green"> I am going to buy a four foot rotary cutter to attach to my JD 2210. An LX4 from JD is out of my price range so I have looked at the Woods Brushbull 48 and a Bush Hog Squealer SQ480. I'm leaning toward the Woods since it looks a little sturdier and based on local dealer...

I'm very disapointed in the 54 blade that i have for my JD 2210. I was thinking about getting a FEL mounted Curtis Plow but i decided that i'm going to build my own plow that has a longer with and a higher mold board height. I was thinking of two things. 1. Buying a 72" or 60" ATV for about 200...

I recently found this site and a huge thanks for all the information you folks post. For a rookie like me, it's awesome. Looks I may be coming down the home stretch on making the commitment to buy a subcompact tractor. I'm looking for a mid-mount mower and a FE Loader as accessories to start...

For a while I was set on the JD2210 but as I've been working on the price quotes I'm surprised the 2210 costs so much more. A BX2230 with FEL, 54" mower, bagger delivered is $14K. The 2210 with FEL, 54" mower, and bagger (they fit the X595 bagger) is $17K. I understand the 2210 has 50%...

\"new\" backhoe for JD 2210 I just recieved info on a 5'6" backhoe for the JD 2210. Made by EMB Wallenstein, it prices out for somewhere around $5k, with the subframe kit. here is the link to their site! EMB Backhoe Page

Does anyone know who might make a "rock grappler" attachment for the bucket or 3 point hitch on my new JD 2210. If the rocks are below ground level the are hard to get a hold of with the bucket. THANX

Looking for a back (box) blade for my JD2210. What width/weight would work for a gravel drive way thats 150 yards long. Any recommendation would be great. Sorry if this has been talked about Thanks

I have installed XM Satellite Radio on my JD 2210 Tractor. First I had to install a 12 Volt outlet in the Dash. Next week I will probably hard wire the XM Receiver into the electrical system and keep the outlet for a Spot Light or something. Next I'm thinking of installing a winch, anyone...

I just thought that i'd post some pictures of my JD 2210 with the curtis cab, heater and console in there just incase anyone was interested in any of that stuff and wanted to see it. This is a picture of the 2210 from the front.

Hi, i have a JD 2210 with a curtis cab and the new curtis console. I also have 4 of curtis' work lights. Two on front and two on back. I was driveing the tracor at night the other day and i was using the lights, and the tractor was at full throtle, and then the lights just shut off and the...

Hi guys...getting ready to buy a 48" tiller and am looking at Ken Sweets line and also at TSC. Ken's shipping is very resonable and comes in competitive for what TSC wants. I just wished I could get my hands on one to look at. Any of you have the First Choice brand that Ken carries?

Hi, i was plowing with my 2210 and the FEL when i noticed some hydrolic fluid comming out of the transaxle i saw it in the snow. I took to into the garage and on the left side right above the axle was a little cylinder about an inch and a half long, it was all covered in fluid. I noticed that...

Who here has been plowing snow with their John Deere front blade and Front Quick Hitch? I was plowing our road and driveway during the 1st big storm this year (yeah, I know it is March). Wouldn't you know it but the hydraulic fitting on the "angle cylinder" snapped in two. Why? Well, it...

I posted this also in the attachment forum. I know that some were wondering if the standard SpeeCo PHD would work on the JD 2210. I finally had time Friday to put it together and try it. I had to use the farthest hole and got 6" of clearance. I also found a spot that had not frozen to bad and...

I know that some were wondering if the standard SpeeCo PHD would work on the JD 2210. I finally had time Friday to put it together and try it. I had to use the farthest hole and got 6" of clearance. I also found a spot that had not frozen to bad and was able to dig a 12" hole in about 5...

Spring will be here soon and I'm looking for suggestions on a landscape rake and box blade make and model for some upcoming projects I've got in mind. I have a 900 ft gravel drive to keep level and filled with gravel and also 100 ft of sandy beach frontage (which has about 25 feet of depth from...

Hey everyone, i have a JD 2210 wiht the 210 loader and 61" bucket and the front blade. I came across the Curtis loader mount blades and have been thinking that i would like to get rid of my front mounted blade and go with a curtis loader mounted blade for easier detatch and re attachment, higher...

Which is better B7510, JD2210, JD4010 or CK20?

Hey everyone, i was just wondering if anyone knew if i could use forks for a 410 loader on my 210 loader becuase the dealer told me for the forks its 1200$. and i found someone who can get me some for a 410 loader for 500$ and i was just wondering if anyone knew if these would work on my 210...

Hi, I just got my 2210 yesterday and i got it with the front blade and the loader with a 61inch bucket. The problem is that when I lift up the blade while on the tractor it only lifts 4 or so inches. I'm just wondering if this is correct or if this is a problem becuase I really don't like how...

Thanks to Jim Wilson who, in another Kubota thread, mentioned that someone over in the JD section was running a thread about a Woods BH6000 being put on a JD2210. The thing is pretty; just too bad it's not orange. Click here to jump over there: TBN JD Thread: Woods BH6000 on JD2210

Has anyone had any issues with their oil light coming on a zero degrees and below? When I start my 2210 at 80 hours, with the engine heater on, the oil light comes on for 3 seconds or so. I have the regular oil (not synthetic because it is not to 100 hours yet). The engine heater warms it up...

My wife and I are considering upgrading our lawn tractor but the sub-CUTs we are considering may be too big. Our property slopes away from the road and our little Husqvarna 1542XP gets worn-out mowing our lawn. By the end of a usual mow the HST is unable to drive the tractor back up the hill...

I posted this question on the JD forum and I'll include it here. We recently bought 52 acres and we are building a new house. I have looked at both the NH TZ24DA and the JD 2210. Both have comparable engine specs and options. I am looking for any input as to the reliability, build quality...

Recently bought 52 acres and we are building a new house. I have looked at the JD 2210 and the NH TZ24DA. I will need a tractor for mowing about 6 acres of lawn, snowblowing a driveway that is 650 feet long and possibly a tiller for a large garden. These two tractors seem very comparable in...

Well, I took delivery of the 2210 complete with the snow blower installed. While waiting for snow to arrive, I have been doing some dry runs! A couple of questions: (1) I seem to get some transmission whine in addition to the engine noise. Normal? (2) Compared with my previous tractor, the...

Last week the John Deere dealer dropped off a 2210 with a 54" mid-mount deck for us to try. We've not yet purchased it, but after spending the summer looking at all the competitors, we thought the JD was the most comfortable and well designed. We're interested in using it primarily for finish...

My needs are mowing an acre of lawn and a mile of walking trails around my farm; clearing much snow from a 100 yard driveway and a high snow berm caused by highway plows; occasional moving of rock, soil and gravel, etc. I have been considering a John Deere 2210 23 hp diesel with a 54" mid...

I hate to be the one to re-open a thread but... Maybe someone out there has done this by now. Just to refresh, The only major option I am missing on my 2210 is the Steer-able Dual Rear Brakes. I figured when I bought the 2210, I could easily buy all the parts off the 4115 (or such). Why...

Has anyone out there purchased Horst Welding attachments? I am looking into the #LD35 Pallet Forks attachment? I have a <font color="green">Deere 2210</font> and am considering some pallet forks. My Deere dealer has suggested the http://www.horstwelding.com/ . Here is the actual attachment...

What are the pros and cons here? I am leaning strongly towards the Kubota- after all: 1. Both tractors are Japanese anyway!! 2.Kubota is $2000 cheaper! 3. I always liked John Deere; that is, until my LX 178 lawn tractor cracked the block when I went to change the oil! (after 11 years). Makes me...

Next time you get on your <font color="green">2210</font>, could you turn your key to the "<font color="purple">ON</font>" position (not running) and see if your <font color="red">Water Temp</font> light illuminates? My <font color="red">Oil</font> and <font color="red">Batt</font> do. I would...

I have been looking for several months and have gotten several quotes from nice dealers around the area. I am looking for a loader to these machines along with a box blade and MM 60"ish finish mower. Any thoughts on which machine and why?? We have 40 acres with a 0.3 mile gravel driveway...

Hi Everyone, I'm a new owner of a JD2210 with FEL and 62" mid-mower with a couple of questions... Since the tractor is new (< 3 weeks and < 8 hours) I am not yet familiar with "normal" tractor noises and performance so I need some help with determining baseline operations. The other day I...

How\'s Deere 2210 compared to Cub Cadet 5254 Newbie here, I am in the process of finding the tractor I want to buy next spring. Cub Cadet and Deere are the only ones that are handled fairly close otherwise it's a pretty good drive. Anyway I was wanting to know what the main differences are...

I am starting to compare the Deere 2210 with the Kubota 2230 both with a front loader and 54"-60" belly mower. I have owned two smaller Cub Cadet mowers, but this will be my first "at bat" in the big league world of subcompact tractors. I am getting ready to build a house on a hilly, tree...

Greetings, I'm new to this sub-compact tractor market and need advise. I have 5 acres, most of which will just need finish mowing, but I also need to plant a few dozen trees, do some minor grading and landscape work, and drag some dead trees off. I'll also have to push a little snow in the...

I have a John Deere 2210. The only 2 things I want are " <font color="blue"> Cruse Control </font> " and " <font color="blue"> Dual Rear Brakes </font> ". Other than that... I am very pleased . Does anyone know of any kits to add dual rear breaks or Cruse? I figured when I bought it I could...

This is my first post, but have been reading for a while and decided on the JD 2210. Got a lot of good info and ideas from this forum and the posts before I bought. Bought the JD 2210 in June, 2004. Only have about 10 hours so far with loader work. With the MMM I noticed that the cutting...

I am looking into either the JD or Kubota (would prefer the JD). It is going to come down to price. I am getting it with front loader and box scraper (already have the JD mower). What have some of you paid?? Would you choose one over the other?? I have 5 acres, 3 1/2 usable. Any help is...

Trying to figure which way to go I got the samr price quoted for each . Any coments will be very helpfull.

Sorry the pics are mixed in with shots of my property and pole barn progress. So far I have 68 hours on it. Most made up of digging and using the box blade. This clay is like cement! http://home.comcast.net/~boba198/

My need for a CUT w/loader is probably only 200 hours spread over the summer and fall. Rather than rent a machine for hundreds per week, I'm thinking I'd be better off buying one of these machines, keeping it for about a year and selling it. I understand I'll need to account for 6.5% sales...

Need your help . . . I was at the Massey Ferguson dealer, and he was very professional and polite when I asked him for difference among these three tractors. The obvious were a single bucket cylinder on Kubota BX2230 vs. two bucket cylinders on the MF GC2300. He also said that the distance...

I am buying a new JD 2210 with a 62c mower deck and would like to put on a grass bagger. JD does not offer a bagger kit for this tractor although they do offer a system for the X models which use the same 62c mower deck. Does anybody know of a company that sells s system for this tractor OR...

I have 8 acres that I need to rough cut. I've been looking at the 2210 but just noticed the 790 on the JD web site. I know the 2210 is small but the price is sure right. I think I can get the 2210, FEL, 5' brush hog, and a rear blade for about 12k. It looks like the 4wd 790 is more but it looks...

I had only 10 hours on my JD 2210 when the hydrostatic cooling fan broke. I was using the rotary cutter mowing down 1/2 inch diameter sapling when I heard a slapping noise. I stopped the tractor and looked underneath to find the plastic cooling fan shattered by a twig. My dealer says I'm not he...

Powerful little machine and with the right tires she can put that power to the ground too. I have the HDAP tires from the X-series tractors and they bite hard in dirt. Blading with the frontier 72" rear blade I find that the rear tires sometimes side slip when the blade is angled. Perhaps...

Gonna take delivery on my 2210 next week. 54 inch deck, 54 inch loader and imatch. I also have the cleat tires-ag tires. Trading my 1979 YM155D Yanmar w/loader and rear deck along with 8100 dollars out the door. I was looking to get a Kubota, but the Kubota dealer only wanted to take my...

Last evening after mowing I decided to clean the underside of the mower deck. Wet mowing conditions so far this spring had caused the mower to take on quite a bit of dirt/mud/grass residue. The procedure is to slide the mower (62C) out from under the tractor then use the FEL and chain to hoist...

Sorry for the BH in my post. It is not a backhoe nor is it a brush hog. It is a Block heater to get that thing started on our col winter days in the great white north. Sorry

Hi I've been looking for a tiller for the 2210. I think JD reccomends a 48 inch. I thought I'd check here and see what some of you guys are running for tillers. Anyone try one larger then 48? I'm not having much luck finding one locally except for the JD ones for 1800 bucks. I did find a 55...

Please help. I am looking at purchasing a new JD 2210 with FEL and 54"MMM. I have price that I think is very competetive. My concern is that it won't be big enough to do all of the work I want it to. I have 8 acres. 2 acres cleared with house, 1 acre of driveway and 5 acres wooded with heavy...

I am trying to decide between a JD 2210 w/mower and box blade and a Kubota BX2200. I went to deere.com and was able to get a list pirce on the 2210 using their product configurator but I did not find anything similar on Kubota's website. How do I find out what Kubota prices their tractors at...

JD 2210 review. Had \'er for a couple weeks now... My baby is a 2210 with 2 speed Hydro, 4x4, mid and rear pto, 3 point hitch, 23 hp yanmar diesel, Imatch hitch, HDAP tires and grill guard, 62" mid mount mower. Got a 210 loader with 53"bucket and level indicator, 72"Frontier rear blade, and a...

these units were priced each with FEL, MMM, rear tiller and blade; JD 2210 -$15300, Kub $18500, Farmall- $20000

Mow 5 acres but use a 620ztrac for yard. Move some dirt around and getting rid of my old 8N that I used for rough mowing and bushoging. 4100 w/410 loader 60"mid deck is $14,000 used but perfect and has 135 hrs. 2210 new w/loader and 60" deck is $12,800. BX2230 with loader and 60" deck is...

I need a tiller for my new JD2210. Any recommendations on size and brand would be appreciated.

<font color="green"> Seems like it wasn't too long ago this forum contained a posting about an unbelievable price for a John Deere 5220 tractor that had scam written all over it. Use the below URL to take a look at another unbelievable eBay item. A new John Deere 2210 with a "Buy it Now" price...

Hi folks, I originally posted in lildozers' "2210 or BX2230" thread - because I felt I had similar needs - but GregJ suggested that I start a new thread - so here I am! **************************** I've been thinking about getting a CUT for several years - even visited a few local dealers...

Thanks to everyone on this forum for all the info. I finally took the plunge today. New JD2210 to be delivered next week. I feel like a 16 year old about to get his drivers license. I can't wait!

I have also been lurking on the forum for a while and have made a few posts and am still amazed at the great source of information. Thanks again. I am just about ready to make the deal on the 2210. The dealer has given me what I think is a decent price according to what I have read here...

Well, I'm trying to decide on a BX2200 or the Deere 2210. I expect to get a deck and FEL What are your experiences? Which would you buy? Any idea on price in the Toronto area? Thanks in advance

Folks, I have 2 acres of property with 1 acre of fine manicured lawn in MA. I'm looking for a machine that can be used for mowing, bagging, snow blowing and possibly a tiller and a small landscape rake down the road. I have been looking at the Kubota 2230 and the John Deere 2210. Both are nice...

I have a 5ft KK rear blade. This past week I had my first opportunity to "play in the snow" on my gravel drive. Since 3ph height control is somewhat lacking with the JD2210, I was wondering if anyone knows of guage wheel assemblies which could welded/bolted to the to the blade

I hope it's okay to post this, I have couple of items for a JD2210 listed on ebay: Rear tire chains (these probably would fit a Kubota BX too, but I'm not positive) http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2590233711&category=40108&sspagename=STRK%3AMESSE%3AIT&rd=1 Work light...

Does anyone know if the 2210 is set up to add a rear remote or not? Or, does anyone have this installed on their 2210? Chuck

Just got my 62C deck delivered and I am about to install the attaching kit. Noticed on the parts list that it calls out for (2) Lift Rod Assemblies (item E the part with a yoke on each end). Is this correct? Looks like there should only be one of these required on the left side of the machine...

I have a JD 2210. I wish it had cuise control on it, but it doesn't. And JD doesn't offer it as an option. Is there any after market cruise controls that would work on this hydrostatic transmission?

Hi Was looking at a few snowblowers for the 2210. Seems most dealers around here have the Buhler Allied or FarmKing, same blower as far as I know. Any coments on the Buhler brand and would a 50 or 60 inch be better. I would like about a 54 or 56 but Buhler don't make it and at 1150 for a 50...

Has anyone ordered the parts and technical manuals for their 2210 tractor? I beliveve the cost with shipping is $126.55 for both manuals. Are they worth it? Hopefully they are better than the owner's manual. Thanks, Ken

Does anyone know the standard bucket width for the 210 loader when mounted on the 2210 tractor? I do not see this info. in their literature. Are other width buckets available? Thanks for the help, Ken

Saw this at the Deerfield fair this weekend. I don't know if anyone has posted a picture of one installed on a 2210 yet, so here goes.

I contacted FEMCO, Inc., today and learned that the folding ROPS for the JD2210 is now in stock and available for sale, so I ordered mine. The selling price is $299.00 plus UPS shipping cost, of which mine was $32.00. If you have any questions, or interested in purchasing one you may do so by...

I have been looking to buy a JD 2210 for my 6 acres. I have priced it locally with the 62 inch deck for $11,500. Is this a good price? However, today I found a 4410 with 5 hours on it for $16,500.00. It has rear and mid PTO, eHydro, Folding ROPS, Dual Mid Selective Value. I am wondering if...

I am going to buy a JD 2210 with an FEL and 62" MMM. What would be a fair cash price for this unit? If any dealers are interested in giving me a quote on the above please e-mail me at HOSSGT66@aol.com. I live in Massachusetts. Thanks for your help, Ken

Not that I envision doing this all that often but I'm having some difficulties. I get up to the point just before removing the hydraulic lines. I move the joystick around to relieve pressure and the FEL always settles too far so I can't back away. Anyone have any tips? Thanks, wickman

Made the plunge today after a lot of research. Choice came down to BX2200 or JD2210. I like the foot pedals better on JD and so does my wife. That and the delaer was very helpful and good to work with at JD. He made me a fairly good deal even though they do not like to deal on these mowers...

I surprised myself Friday and actually said "OK, let's do this." I could have second guessed myself forever. Should I go bigger? Another make? This really is alot of money? I put an end to the questions in my mind on Friday... at least I won't second-guess myself for a few weeks. Well, I ended...

Is it just me or is anyone else finding that this knob is quite hard to turn. I've got about 21 hours on my 2210 now with a 62C mower deck and I am still not able to turn the mower height control knob while sitting in the tractor seat. I have to physically get off the tractor so I can get some...

Which Kubota does the 2210 compare itself to? Is the frame size in between a BX and a B? Does the JD have more to offer than a Kubota for the money? Thanks Yooper Dave

I took a test drive on a 2210 yesterday and I liked it alot. I like having two pedals instead of the boomerang one on the Kubotas. I can stretch my legs out farther. It seems more comfortable. Dealer is asking $12900 for 2210, 62" MMM, and 210 FEL. May be a bit high but no one has any 2210's...

I have a new 2210 and it does not have the bucket level on it, is that a option or is that standard and got left off on setup. I have looked at all the pictures I can find and some do and some don't. I have not had a chance to question the dealer yet but, I want to be informed before I...

I've been reading TBN for the past couple of months and I am impressed by the amount of useful information that is contained here. Like so many others before me I have finally convinced my wife that I need a tractor and she has agreed. Now it seems like the hardest decision is deciding what to...

<font color="green"> Has anyone with a 2210 purchased a canopy? If so did it come from a JD dealer? My wife said that I needed a canopy so that I wouldn't cook what I have left for a brain. I have a call in to the JD dealer but he stated that he wasn't sure that a canopy was available. </font>

First I would like to thank everyone here for all the helpful posts. I have been reading the board for about a year and learned alot. I think the board helped me make an informed decision on buying a tractor. Last year my dealer was stearing me towards a JD 790 for my budget, it just way too...

I am needing to replace my newly restored JD318 - which I really like, but it is too small for my property, and I definitely need the 4wd for the hilly parts of the property. How does the 2210 stack up? I am quite concerned about the size, as Deere's website shows a turning radius of 7.5 ft...

Thanks to everyone for all the great advice. I decided to buy the JD2210. It is a great little tractor. All the price discussion on here really helped me with my purchasing. I live outside Savannah, Ga. got the JD 2210 with 54 mowing deck, JD LX4, JD 210 loader for $12150.00. Buying a box...

DOES ANYONE HAVE ANY SUGGESTIONS ON USE OF TURF TIRES OVER THE BAR TREAD DESIGNS. I INTEND TO PURCHASE A 2210 NEXT WEEK. THE DEALER HAS REPETIVELY MADE THE COMMENT THAT I WON'T BE HAPPY WITH TURF TIRES. I HAVE A 970(APPROX. 38HP)FRONT WHEEL ASSIST WITH BAR TIRES, FEL, BOXBLADE, 6'ROTORY CUTTER...

Not to beat a dead horse but... the dealer came out today and worked on the deck adjustment height knob. (It previously did not move at all). It now rotates 360 degress. And the 5 indicator is 5 inches, 4 is 4 inches, etc. However it only moves counter clockwise. The dealer says that is...

I have a dozer blade 54" from the trusty jd314 that I am going to modify a bracket to fit the 2210. My question is if the hydro oil that is in the lift cylinder compatible with the hydro oil in the new 2210? I am wondering if I need to flush cylinder/s with fuild from 2210 and then top-off...

I am going to buy either a JD 2210 or a JD 4110 . I have been reading every post I can find regarding the 2210 and the 4110. Though I am normally a decision maker I find myself stymied. I have driven both (not much difference in handling I thought). I even have a 2210 in my garage this...

I have been shopping around for the new JD2210 but not having much luck. I have been to three dealers, called four others inquiring about the JD 2210 but seems like they are either extremely high priced or unavailable. The prices I have been quoted with just a 62" mower are over $11,500 while...

I have narrowed it down to these. They are the "same" price around here and just can't make up my mind. I am getting it with a FEL and MMM. The JD dealer is pushing the 4010 but I like the size of the 2210/2200 better. I have 2 lots. 1 is lawn, 2 is field both totaling 5 acres. The only reason I...

Last week I sent an email inquiry to Femco, Inc., on the availability of a folding ROPS they are developing for the JD 2210. Today, I received a response to that email from Rick Young of Femco. Here is the message he sent me and I just wanted to pass it along for those who might be interested...

Well I just ordered a 2210 and need a bit of info on box blades. The dealer carries Frontier which seems to be pretty well made. He is not sure if the 2210 will handle a 5 foot box or if a 4 foot would be best. I told him I'll ask the experts on here and let him know. So anyone got any words of...

Hi everyone, This is my first post but I've been reading this forum for over a year, thanks for all the useful information. I started out wanting a BX a year ago and then along came the 2210, my dealer has both in stock so I was able to compare and drive both. Now I'm leaning real hard towards...

I have been thinking about a 2210 but would like to be able to uses a backhoe with it. Is this possible? Thanks Martin

I am very close to bying a new 2210 withe a FEL, 54" MMM, Ballast Box, and an Imatch. I have yet to test drive one because they are hot items around here and all the display ones seem to be sold already, I have not even seen the loader in person, but sitting on several and "getting a feel for...

I'll mostly be mowing, but I'll do some loader/tilling work. What's better? Turf or bar tires? Filled or not? Or something in between? Thanks

i was sold on the bx1800 untill i saw the jd2210 today. the jd was priced at 10500 for rig and 54' mmm and the bx is 9995 for same set-up. what's people's opinion?

Can any of you folks who have a JD 2210 with factory bar tires help me? My 2210 came with turfs. I would like to get some bar tires to put on the existing rims. I would prefer to use the same ones the factory uses. Can someone give me their bar tire manufacturer / model name / tire size for...

<font color="green">What size rear grader blade is recommended for the JD 2210? Any official word on this from John Deere? What size have some of you purchased and used with this tractor or a comparable sized CUT? I ordered the Midwest RB22-60, a five foot blade, but now I am thinking...

I have been given a price for each tractor that is within $100.00 of each other. What my question is the JD dealer that I went to offered more incentives. He offer to pay the insurance and also a quick hitch. I don't know about the electronic pedals for the hydro vs the direct connect type...

Anyone used their JD 2210 with a box blade? I am wondering how well it will handle a 5 foot box blade in a variety of situations. A 4 foot box blade sounds kind of small to me. My primary use for the box blade will be to work my 500 foot long gravel driveway although I need to move a little...

First question on this board as a new member just today. I'm looking seriously at buying a JD 2210 for mowing (about 1 acre with a few trees), loader work (topsoil, fill stone, mulch), plowing snow and maybe adding a backhoe (burying downspouts, inground sprinklers) at some point. Is there a...

Has anyone used a 2210 that has used a Kubota BX2200? If so, which one do you like the best and for what reason?

I stopped at the local JD dealership today just to look around. They had 2 of the new 2210 CUTs there. My girlfriend was with me and she said it was "cute". Ihad to explain that tractors, like tools are not "cute" but the cool or slick were acceptable descriptive terms. Over all it looks...

I saw 2210 sitting in a dealer's lot in Central Wisconsin, but it was too late to talk to any of the sales people, and my camera was not with me. I should be able to post pictures in the next few days. It is quite good looking, but seems smaller than a nearby 4100. If possible, I will try...

There are several other discussions in this forum on sub-compact utility tractors, especially the 2210, so here's a list of specs for the 2210 that is shown on Deere's website under the 'Build & Price' configurations option listed under compact tractors. The pictures that were on Deere's...

Twenty pictures for your enjoyment. Attachment name will give you some clue as to what I was attempting to capture.

John Deere 2210 Specificationstaken from Deere’s “Build & Price” Configurations August 2002Subject to change without noticeENGINE:Yanmar 3 Cylinder Liquid Cooled Diesel EngineHorsepower @ 3100 RPM:Gross 23.0 (17.1 kW)*Net 22.5 (16.7 kW)*PTO 17.7 (13.2 kW) HST* *Manufacturer's Est.61.4 Cu. In...

Follow the web address below to see this new tractor..... http://products.deere.com/webapp/commerce/command/ProductDisplay?prnbr=0100LV&prmenbr=8416&PrevCatRef=8520&PrevCatcgnbr=CUT&path=HO&pcat=8550