iseki tx2160

Background: I have an Iseki TX2160 with a Loader attached that has not been plumbed properly. It has a 2 spool Walvoil SD5 valve block, which has pressure feed taken off from the banjo bolt of the factory pressure line between pump and 3 point linkage forming a Tee. The Tank connection is...

Hi All, I am hoping there maybe someone that had a similar issue or some expert wisdom out there to help with diagnosis. When I try to start the engine it turns over slowly and I get grey / black smoke from the exhaust. It does eventually start but struggles. This happens even after it has...

Hi, Just joined so Hi everyone. I've just managed to destroy my Iseki 2160, basically the loader took the weight but the front axle sheared at the hub. So after a bit of help from the experts: 1) does anyone have a service manual/part diagrams so I can identify what I need and how it goes on...

I'm new in the forum and before posting my question I'd like to say Hello to everybody. I live in Portugal and I've been exploring the Internet for a compact tractor with a loader. I found a restored grey market Iseki TX1510. Interesting price, few hours. When I asked the seller whether there...

I have a TX2160 with what seems to be a less common axle steering joint layout. All the manuals I can find show the following structure: Mine is like this: Using two pairs of bevel gears and a shaft running coaxially within the kingpin casting instead of the universal joint and spur...

Having made a replacement gasket out of a hard gasket material while I have been sorting out my tractor, I now have a small leak from the sump gasket, would cork be a better alternative to the gasket material used previously? or what would be a good option, the original was a soft type material...

I am in the process of rebuilding my 2160 and tonight have come up with a small battle with the lower spline to the front diff, is there an easy way to get this back in place, I have wrestled with both halfs of the tractor for a while tonight but had to go and leave it so I thought this would...

I have a Bolens Iseki TX2160 with a k3b Mitsubsihi engine. I need a voltage regulator for this tractor. The alternator is a Mitsubsihi AH2035M4. (35 amp) Can anyone tell me the correct voltage regulator for this tractor? NEED A REPLACEMENT REGULATOR...

The wiring from the alternator in my Iseki has separated where it had been joined by a previous owner. The alternator has only 2 wires coming out of it, and they're both green. The original wiring loom has 4 wires that are wired back to the following terminals on the Voltage regulator...

Hi all, Just bought a little TX2160 mainly to do some mowing at home. I bought it as a non runner that had sat around for about 5 years, I have managed to get the engine running and replaced all the oil & filters but I've got a problem with the 3pt hitch. The hitch raises and lowers as it...

HI..I have just purchased my first ever tractor! I have a smallholding of 10 acres which has some drainage problems the little tractor has a loader and backhoe, so im looking forward to addressing the land issues, also there has been a lot of recent snow which I can now move. I have two...

Hi this is my grandads tractor he has a little one acre allotment (keeps him out of trouble in retirement) We have been having a problem where it wont start. There seems to be getting air in the fuel system even when its running?? Has anyone had or heard of a similar problem?? i Have checked all...

Hi I am having problems with the hydraulics on my 2160. They work to start with, as long as the engine is on full revs, but after a short period of time they just stop working. The TPH will move but there is no power. The other ting I notice is that there seems to be 'air bubbles' in the...

Does anyone have any info about this model. There is one on E-bay now and it is local. I was thinking of going to look at it. Anything you can tell me would be appreciated.

Does anyone know if this unit, Iseki TX2160, is considered an "orphan" partwise? There is one for sale locally and I was thinking of looking at it. I just don't want something that has terrible parts availability. Thanks for any help you can provide.