iseki ts1610

i have an oil leak on the rt front of an iseki ts 1610 4x4 what seal do I need to cure the problem?

Can anyone help me with where or how I can connect up a spool valve to operate a tipping trailer on my 2wd TS1610? I have searched the internet but now my eyes hurt! Also anyone know of a TS1610 that’s breaking for parts? I need some panels that are missing on mine

Gooday folks! I'm new here and a new owner of a Iseki TS1610. This little thing has been poorly maintained so I'm looking to start off with changing fluids. Anyone know where the drain plugs for the hydraulic and transmission fluids are and roughly how much it takes? I can't find any books on...

Hi all, can you help me find a part please? We have looked everywhere. I need a fuel pump for a Iseki tractor, model TS1610. All info I have on it below. Inj Pump 4302-610, Fuel Pump Diesel Kiki, Assy 3PF050646, Maker I/P Assy 5-15610-657-1. Gov Adjusted 450-1150 RPM Hoping some of you might...

When I start the tractor it goes to full throttle and won't come down. Throttle linkage is good and moves freely. I think it is caused by the governor but have no idea where to look. Any advise would be helpful.

Hi all, I know it is stupid but here in Bulgaria is difficult ( imposible) to order a filters for iseki. for the fuel i found Wix, but the Air filter is a proble. If any one know some part nubres of alternative makers please give an information. on the original one there is ..Tsuchiya U4217...

Hi, Just got my first tractor, it's a bit tatty but rung good, only 400 hours. Looking forward to using it in anger. We are currently in Cheshire UK but will be moving to France latter this year Nigel

I have an iseki ts1610 that will not start, it was runnung fine i cut it off and it would not start back, Im getting fuel to the bleeder on the pump but its not getting to my injectors.also the glow plug indicator burned out. Thanks for any help. Bray

I am rebuilding the front axle assembly due to a major oil leak. I have removed the oil seal and need to find a replacement. The info on it is NACTEC NAE0257A, the zero could be the letter O. Also, all of the gaskets were made by the gasket in a tube material and I would like to replace it with...

Hi guys, I'm not really a new member I lost my password and can't get it to reset so here I am again... My neighbor has an iseki ts1610 that needs serviced. I wanted to change the hydraulic oil out in it. There are two drains on the bottom of the tractor. One on the transmission and another...

New member here, just bought a TS1610 2wheel drive. i have also purchased a 4ft box blade and finish mower and a homemade hydraulic dump trailer that i helped my boss build in our fab shop at work and i am finishing at home. I would love to have a front loader for this, what options do i have?

What could be the problem with the Solenoid?? I went to start the tractor and there was Nothing!! We have a brand new battery so that's not the problem!! One thing is today we found out that if you give the Solenoid a few hits with a wrench or what not it will crank over and start!! What could...

I am trying to find the right glow plug for my ISEKI TS1610. It appears that the plugs that fit my engine are different than the stardard plug. My plug has a longer pin and a shorter shank ( part between the pin and the thread) than the standard. I dont know the year of the tractor, but the...

I need help on why water would be in the Hydraulic Reservoir or could it be coming from somewhere else? Just need and answer Thanks. Also the Drain plugs there is one below the oil fill line on the left side and there is a drain plug on the bottom. Which one do you unscrew to drain the...

New member here. When I bought I bought my property, it came with an Iseki TS1610. I have no manuals (yet). I have figured out how to operate it to some extent, but don't know what all of the levers do. Also, I'm not sure about the different PTO lever positions. Additionally, the left brake...

I just purchased a used ts1610 iseki tractor. i am looking for a repair manual. the clutch is slipping and would like to be able to fix it. also, is there a dealer somepace that sells these tractors.

Anyone have a used good running Isuzu 2AA1 engine available?

I was running my TS1610 for about an hour yesterday. I removed the key after I started the tractor. After cutting for about some one flagged me down and I shut off the tractor so we could speak from about 200 feet away. I could not start the tractor. The battery is dead. Does the tractor...

I bought a used 1610 tractor at a auction there is a lever on the side is this a decompression lever? It starts very hard. Also sounds like a rod knocking when it is trying to start (very noisy) Also when it does start cant shut it off I have to pull what I think is decompression and stall it...

Hello all, I have bought an imported Iseki TS1610 4wd, unfortunately the dealer didn't have any handbooks with it nor did Iseki because this tractor was ment for the local Japanese market. Is there anyone who can supply any kind of information regarding this tractor? Thanks in advance!

Hello all....excellent forum, newb with a question. I have an Iseki TS1610 I have owned for about 2 years now. Has performed flawlessly until yesterday. I went to blade my driveway, and after about 10 minutes of running, it started spewing oil (lots of it) out of the breather cap. I shut it...

I'm trying to attach a Great Bend loader to my Iseke TS1610 4wd. Great Bend doesn't make a mount for this tractor but Koyker makes one for theirs for the 2wd model. Can the Koyker mount be modified to fit the Great Bend? Is there a Great Bend mount for another Iseki (Bolens) that can be...

Trying to find a mount for a great bend 220 loader I bought for my Iseki Ts1610 4wd. Great Bend doesn't show a mount and I was wondering if anyone had an idea of another model that might fit the 1610 (perhaps 1910?) Also, Koyker makes a mount for theirs for a 1610 2wd. Could that be modified...

I purchased an Iseki TS1610. The tractor seems to be in great condition and has lots of power. Unfortunately (for me anyway) the labels are all in Japanese. Can anyone tell me what the three red indicator lights on the dash are? Has anyone had experience adding guages for oil pressure...

Hello, I'm new to this forum and it's GREAT! I've been in the market for small tractor. I've looked at Yanmar's and Kubota's. I've got a chance to buy an Iseki TS1610. I don't know much about this tractor, but if anyone has one I'd like to have some input. Is it dependable, good working, etc...

I hope to either build or find used a small backhoe for my Iseki TS1610. Does anyone know how I can tell if my hydr. are capable? How inexpensive can a used one be found? Thanks