glow plugs

I am replacing the glow plugs in my 254. After removing the old plugs, I noticed the threads on the new plugs are shorter than the old plugs. Is this an issue? Thanks in advance.

Ive traced a glow plug issue to a bad plug. I desided to replace all 4….. once one goes…. I ordered 4 new ones, but cant find the proper torque requirements, and/or weather i need to use a sealant. Its for my 2010 DK45HSE Thanks for any help. I cant find the info in the service manual.

Not getting power to glow plugs. Also, dash glow plug indicator coil does not glow at all, so obviously no power. From the wiring diagram, it appears that both the glow plugs and the glow plug indicator are coming straight off the ignition switch. Is it safe to assume the problem is the...

The SIL just picked up a hardly used 2012 Deere 3032E with just over 400 hours. It did not come with a manual. I downloaded one from Deere (free) but did order a printed/real one. He brought it to me to look over and fix anything I found since I'm "the fix-it guy". It was used to spread salt...

Out of nowhere my reliably starting (and seemingly new, where did that eight years go to?) Kubota BX23s wouldn't start, and we noticed the glow plug light wasn't coming on. First thing checked were fuses and it seemed one time that just removing and reinserting the fuse got it to come on and...

Hello All, I just noticed that the glow plug indicator on the dash (the manual calls this the "Glow Lamp") is not illuminating when I turn the ignition key. I suspect the glow plugs are not working because the tractor started rough (more rough than usual in the winter). Luckily it was a warm...

New to this RTV, and this morning it was about 29 degrees. The manual says turn to glow plug spot on key for 5-10 seconds. I only have 3 positions; Off, On, and Crank, so I put it in on position for about 10 seconds and never saw the glow plug indicator light up on the panel and it didn't want...

I've got a 2008 2910i with kukje A1400N3 engine. I'm looking for glow plug part # and suppliers and block heater recommendations.

I found there were several people that had questions about replacing a hot wire indicator for their glow plugs and thought I would try to help. . It is called Nichrome (Nickel Chromium) wire and its been around since 1906. It was the first wire used for resistance heating elements. It is...

Hi all, I’ve owned a 2005 Kioti CK25 HST for ten years 1,300 hrs, when I go to start cold the glow plug light takes about 9 seconds to turn off then I start it the light comes back on then turns off after another 9 seconds, but lately when cold instead of 9 seconds after start the light goes off...

I have a 2006 Mercedes E320 diesel and I need to replace the glow plugs is there a preferred lubricant anyone uses??

Hello all, Have a new to me 2005 1528. When I go to start, it takes a few minutes to crank and then start. I had a JD4300 in which the glow plug light would come on when the key was turned to the start position. Reading the manual, it states the glow plugs are activated at the start position...

Hello im here with yet another question. I dont see in manual where it says how long of a glow plug cycle is required. My brother inlaws kioti when you turn it to glow stage on key and hold it the light in dash will go out on its own. This 1547 seems to be cold blooded belchs blue on cold...

Hello does anyone know where the glow plugs are on the 7340, I have looked everywhere on top of engine, thanks

I have too many tractors to not be a member of this forum so I decided to join, hoping / praying for some help on a problem I can’t seem to solve on my own. Hopefully in the future I can contribute some too. The glow plugs on my tractor are not working. The power feed wire to the glow plugs...

first, do yourself a favor and remove the hood for clearance. then remove the whole air filter assembly. I had a 9/16 on ratchet and that worked but prob a 14mm. the airbox clamp was 10mm. Then remove the bracket that supports hood rod, engine side of muffler. there are 4 bolts (iirc 12mm)...

anyone try this on a GC24xx series? https://www.tractorbynet.com/forums/threads/gc-series-owner-upgrades-and-modifications.233693/post-2705772 EDIT: see below. mine has bulb, dash display, no wiring from plugs to dash.

First time poster here. I recently put my 2019 Mahindra 20 Emax on its side while clearing brush. Since I was alone, it took me about 3 hours to get it turned upright again. The tractor rolled onto its left side and, as the tractor laid there, the inside left tire rim filled with a light...

My TC29DA has cranked longer to start with the cold, plus some erratic behavior at the glow plug light. This post is to share how I worked though things. I replaced the glow plugs in the process. For documentation, my New Holland P/N is SBA185366190. I paid $30 for eBay replacements and...