gas

My fuel gauge died in the last month or so and I don't have time to sort out the classic "check the sending unit" recommendation in many other posts. Has anyone found a particular 3rd party fuel cap with gauge manufacturer which happens to be Kubota friendly (right width of cap for fuel...

I’m looking for a chipper to augment my part time tree work and at home. It’s a pain sometimes when I have to remove the brush. I also have a lot of trees in my yard and constantly piling up brush. I have a Yanmar SA325 with a 23.9 Engine HP and PTO 18.1-HP. I usually bring the tractor in my...

I do some residential lawn service and I am constently transporting and filling my 5gal cans. I would like to find a safe, economical, reliable, electric fuel transfer pump that I can just draw fuel from my truck, havent found it yet! Any suggestions

Greetings all. I was given this cylinder from a retired gentleman (who has no idea what gas it was), and honestly thought it was empty, but after freeing up the cylinder/valve protective cap (took a while as it was rusted..), if I crack the valve, I get what i believe is the sound of gas still...

Looking at purchasing a trash pump or sewage pump to rent out. We got 300" of snow this year and many basements will flood. The gas is higher flow but will require a truck to pick it up. It is louder and requires to be outside. Electric is cheaper to buy but will not flow as much. I am thinking...

One of our oil/gas production companies stated that 4th quarter revenues were up due to a rise in natural gas prices. I saw today we sold natural gas for $2.08 in December 2024. Current price is almost double at $3.943 as of today. While it helps us on the production side it will certainly...

I'm looking to get welding gas, however, I am having a significant amount of trouble doing so. I currently have a mig/Tig/stick Everlast machine, but I've only been using the stick or Flux core components. I want to use Mig and try Tig. So... I contact AirGas thinking my local store can take...

'75 Ford 2000 3cyl Gas brake cross shaft leak, looks loke brake side, few questions Buy seals and? Bushings? Or wait to see what all needs after take out? Seems all good but leak on right side. To Top off oil before repair, it looks like a thin light brown oil, not sure what is in it, will it...

We have a DCS LP gas oven. Have had it for nearly 20 years, 5 burners, broiler, and oven. For some time, the oven burner had a tendency to burn inside the flame tube, and it took forever (2+ minutes) for the igniter to light the gas. Well, I ordered out a replacement igniter from an on...

Pulled the head, have a large crack and a decently large hole inside the intake side of the head. Is this something a machine shop can mess with? Hard to find a new head for a 1968

How are you guys carrying chains, chainsaws, gas/oil, etc? I see a couple of posts where chainsaws are being carried on top of the engine cover and a PT is towing a trailer, but what are the other ways you guys are using to at least carry a chain and saw from time to time?

I bought some Kirkland (Costco) diesel rated oil for diesel tractor summer use. It's rated for that and shown in these photos. But I just noticed it's also rated for gas engines--I think--because it has an API SN rating. Does that SN mean I can use in a gas tractor as well? I know not to use...

All, I am looking at an International 444, gas engine, with a loader to try and get something going on a machine for not a whole lot of $. That sounds like quite the risk, I know. Ive got a lead on one that isnt running. Im pretty good with the fuel and electrical systems. I think I can...

I have a John Deere 4010 (field tractor), with a gas engine. I am having issues with getting it to run. I MAY have run it out of fuel (I personally don't think I ran it dry, but may have) It acted like it was out of fuel, would not start when fuel added. Changed fuel filter, good to go, ran...

I have a Kohler powered T7 which came from the factory with the propane fuel setup. I had a little problem with it freezing up yesterday and, since I don't understand anything about the propane components (regulator thingy, mixer thingy) I have decided to just make my life simpler and convert it...

I am purchasing an HPX to do barn chores. Basically takes about 2 hours, going from stall to stall. I was told with my Gator TX, just to run it vs shut off and restart 6-7 times. What is better for the machine to start and shut off or let it run? Both the gas and the diesel.? Is the diesel...

Hello, is anyone able to post a photo of the wiring on their solenoid? I was previously sold a 4 post which Is not the correct part but I made it work for the time being. Then the tractor started having problems starting and now its been sitting for awhile. I finally got the the 3 post but i am...

Has anyone ever had the gas gauge disappear, but all other gauges are still there? Mine just died with no bars. Thank you for the help.

Hello all, My zero-turn had a clogged carb due to me not cutting ethanol fuel off last year in the gas tank over winter. This is my fault and I learned a lesson. I pulled the carb off, cleaned it and put back on. It runs fine now but I have to cut the fuel off and run out of fuel everytime now...

Hi questions on Chinese off road go karts for a 6 yr old. So a family member got into my daughter's head how great a kids atv or go kart would be to use around are 15 acres. So wife and I are looking at them. Definitely not getting a brand name one $$$ most seem rebranded anyway. My 6 yr old...

I might be getting a Bobcat M600 electric skidsteer? Has anyone ever converted one of these to gas? If so what engine is suggested? What all is involved? Cost? Is it worth it? Anyone have the specs on the electric motor? We have 3 phase 208 voltage at our shop (just to try it out). I haven’t...

Have a Deere R70/R72 riding mower I recently refurbished. Has a gravity feed tank feeding a now 12hp single cylinder B&S. Original gas cap was vented and in bad shape. I ordered a replacement part from Deere and got the part that superceded the original which fits but is not vented. Didn't...

Asking for my uncle: Anyone have experience with Skags or Kubota gas engines? 2014 72" Scag Turf Tiger with a 3 cylinder Kubota liquid cooled engine, 900 hours. Owner states it is down on power and believes it to be the distributor. Would like to hear others experiences before purchasing. I...

A critter in the yard chewed a small hole in our mower's plastic gas tank and I am hoping to find a repair sealant that will stand up to gasoline. I am guessing a squirrel because there are scratch marks like they leave sharpening their teeth but unfortunately there is a small perforation in one...

Team, New to the forum. I hauled my Mahindra 2538 to a friends to do some work. It is on the trailer, and I noticed that the fuel level was low during start up. Yep, grabbed the wrong can, filled it up, started it in prep for unloading, and it ran until it stalled. "Thought bubble" - "You...

I have been fighting issues with my 3 Cylinder Perkins Gas M-135 for a few years now. I finally broke down and bought a new carb for it a year ago and it has helped. However, I am still having a few issues that I would like smarter people than me to help figure out. When throttling up, it...