ford 555

Ford 555B Loader Backhoe takes a long time to get moving. If anyone has answers that'd be cool. If the tractor is cold, even when put into forward, and with the rpms raised (or not, doesn't matter).. doesn't move. I've watched my father sit on this thing for 10 or 15 mins waiting on it to...

I am looking for a 12" backhoe bucket for my Ford 555. Are any other brands compatible with the Ford 555? Case, etc? TIA

It will start fine cold but after warming up it will not restart without a shot of either. Runs fine until I shut it off and then then it just turns over trying to restart. Any help much appreciated.

I’m left with a Ford 555 digger (1975-1984). I don’t know where the transmission fluid opening is to add fluid. Please help.

Anyone have one to sell or know where I can get one? Actually managed to destroy the existing one beyond repair. It’s about a 1985 model and my understanding is this bucket is pretty specific to this model.

Hi. I was digging stumps today and the machine had a tiny bit of noticeable drag to the normal smoothness of the boom operation. I moved the machine to go to another stump and noticed a puddle of yellow/milky fluid under tractor. Coming from 4 bolt inspection plate under trans, behind torque...

I'm considering purchasing a Massey Ferguson backhoe. Not sure the tractor model (it's one of the industrial series), with a 54a hoe on it. The swing motor/rotary cylinder seal has gone out, and the spline is badly worn. I can't find a seal kit, and if I could it would be over $1000. Crazy. But...

Hello,I am restoring an old 555,my powersteering pump works fine,but the resorvoir is pretty rotten,and I know will be full of pin holes once I start to clean off the rust,its very thin.Is this metal pot available seperate from buying a complete new or used pump?Thanks

Hello I’m new and have a 555 that I need some help Identifying the age. Here are all numbers I can find. Any help is appreciated. C407001 C5NN7006 C169477 55011J 7C22 6M21C

I have purchased a Ford 555 Backhoe Loader serial # CB24045. What is the year? Could it be a 555 Special? Tractor Data has limited info. Thanks in advance for your time and knowledge.

Picked up a Ford 555 backhoe, knew the power steering cylinders were leaking. Got them torn down and discovered rods are 0.75”, not 0.685”. Part number listed on cylinder barrel is C5NN 3A739F. Can’t find either that part number or 3/4” seal kit anywhere. In good shape besides seals. Any...

Can anyone help a dummie with hydraulic issues on a 555 backhoe? Thanks

My neighbor says he'll sell his 555 cheap but it's always overheated, like for years. It's not leaking & there's no oil in the water or airflow blockage. My question is if there are any chronic problems, tricky bits or do I just round up the usual suspects. I'm experienced with old and very old...

Hi, came across a 545a axle (see picture attached). I have a Ford 555. Axle on mine have egged hole where pin goes through axle and bushings for pin on spindle are wore through into spindle itself. Does anyone know if this axle off 545a would fit on my 555. Thanks.

Hello everyone, my 555 is leaking oil between rear end housing and transmission. The bolts loosened up and the gasket appears damaged at bottom. NH dealership said tightening bolts may work if I am lucky. They gave me two other options: 1) split tractor and replace gasket or 2) remove bolts...

I i'm replacing the fuel filter for a Ford backhoe 555(dont know the year but is from the 80') and I having a hard time to find the element(canister kind) for the filter. I look everywhere and no luck....( even Messicks) any idea? can I clean the old one and reuse? clean it with what? kerosene...

I have been having trouble with the ignition in my 70's model Ford 555 TLB. I attempted to replace the switch, but between multiple pig tails of the same color, and my own haste, I botched the job. Now I do not know the order that the wires were in. I traced them back to the harness and found...

Have a 83 model 555 ford backhoe and need to replace switch. Can't seem to find exact one I have but then again they may be universal ones .just not sure what wires go where Any help would be great Thanks

I have a Ford 555 and I have know idea what letter it is. I'll attach the picture of the tag and hopefully everything is legible. Thanks for any help

Hey new to site I have a ford 555 loader/backhoe and need to know how to find model # of hoe. Only numbers I've found are behind the starter on transmission.any help will be appreciated. DF511F 8E5B C702444

Anyone know what is the weight of the rear axle of a Ford 555B without the tires. My estimate is 700 - 800 lbs.

Where is the neutral safety switch on a 1983 Ford 555 base-model backhoe? She ran fine, parked yesterday. Today she wont start - like it is in gear. I suspect a broken/loose wire or bad/dirty switch? I checked all over from underneath and couldn't locate. I presume I must pull the floor mat...

I have a ford 555 backhoe and the power steering turns fine to the right, but when I turn left the wheels are jumpy and there is a noise (tapping or pulsating) under the dash in the steering motor. If I turn the steering wheel fast sometimes it just spins and won't turn the wheels at all going...

:confused::confused::confused::confused: Recently picked up a 555B that is in above average condition considering the age. Have been going thru it and fixing little things along with new fluids and filter everywhere. Problem I ran into is the tractor had set outside most of its life and water...

Looking at a ford 555 backhoe and was going to get the manual but not sure if it's a 78 or 88. Numbers I found behind starter are C3NN 7006 C then maybe 2 0 ? The date code I can see 8E 8 ? And is why I am assuming 78 or 88. I will check numbers better again later this week.

Hello everybody, We are upgrading from our old 4500 that is wore out but still does the job to a little new Ford TLB. I don't have the numbers with me at the moment but I will post them later but I think it was made November 1983. I'm trying to figure out if it is a 555 or a 555A. Seen some...

I recently got a Ford 555 Backhoe. I do not know a lot about these machines, however I am mechanically inclined and I learn quickly. While Operating the backhoe digging stumps, I all of a sudden lost all hydraulics. While investigating, it became obvious quickly that something major came loose...

FORD 555 BACKHOE TRACTOR: 0589005 (0 maybe a C) MODEL: DF311F UNIT: 8J28B (1988 SEP 28 Dayshift) ENGINE: 8007B TRANS: 8H090 REAR AXLE: 8F27C I need to know which flavor of 555 I have as I am in dire need of a "readable" wiring diagram. Everything I have found on the internet is...

Guys/Girls, I have a vintage ford 555 that keeps wanting to come apart at the front axle to where it mates with the block No matter how tight I get the bolts 1-1/8" Grade 8 it always comes loose I even tried red loctite last time * granted it was a hurried fix and probably didn't set up...

Hello Everyone, Don't mean to double post here, but I put my first post in the general buying/pricing section, and didn't get a reply, and I'm wanting to make a move here. I've recently purchased about 60 acres of wooded, hilly land here in Southern Indiana, where I plan to build a home. I'm...

Hello Everyone, New to posting here, but I've used this site for information many many times. Great site! I've recently purchased about 60 acres of wooded, hilly land here in Southern Indiana, where I plan to build a home. I'm looking for a used backhoe to get things going with. My first...

Hi guys. I wanted to post this because I've seen other people ask about it or comment on it but never really answer the question in depth. It pertains to the thermo start system on older ford TLB tractors and wiring to a new ignition switch. With original ignition switches, to use the thermo...

Hi Everyone! I was wondering if someone might me able to send me an ignition switch diagram for a 1988 ford 555 TLB. I just recently purchased it and the previous owner put a regular switch and push button to start it because the key broke off in the ignition. It works fine but I live in PA...

Power reversing 4 speed shuttle Yes I know there are some threads on this, most unanswered questions, but some with good info. Hopefully this thread can serve as a reference for others while I search down the cause. I split my tlb this weekend to fix the freeze plug on the rear of the motor...

Hello everyone, Im helping a friend tidy up his Ford 555 digger and he has a leak the ATF fluid is leaking into the rear axle, we're wondering has anyone ever had this problem???, the main question is do we have to go in from the bell housing or do we have to remove the gearbox and axle, we...

I am in South Africa and own a 555tlb - I believe its circa '75. Its the two wheel drive with the four speed auto reversing transmission. The transmission oil seal failed and the agents only have two in stock in the country and needed two days to get me one so I went to a reputable bearing and...

It's a turbo 3 cyl ( yes I am aware that all my research shows ford never made a turbo 3 cyl) Here's the relevant data Tractor # c579957 Mod # df311f unit # 8f213 eng # 8e01b tran# 80200 Thanks here is photo proof of a turbo LOL

Need info on changing hydraulics filter on Ford 555TLB (early 80's model). Not sure where to find the filter and how much fluid needs to be drained in order to change it. I read somewhere that there is a "screen" that should be cleaned periodically as well. Having difficulty with motion of...

I have a new injection pump , that I just bought and want to replace the injectors. Can anybody give me the injector part # for a 1979 555 backhoe , power reversing trans, 2 wheel drive, 201 engine. Thanks

Thanks for the help with the unit number on my ford 555 backhoe dana pynch

Hi all, Noob here. Acquired a 1980 Ford 555 from a neighbor a couple years ago and it had been running fine since. Parked it in late Nov 2012 and went to start it a couple weeks later and nothing, panel lights lit for a second and went out, won't come back on. Battery is fine- fairly new...

My buddy is looking at a ford 555, the owner says the hydraulics are weak, what is the going price for one of these machines?

I have a Ford 555 backhoe (early 1980's) that I use probably once a month and when I tried to start it today, it would not turn over. The battery is relatively new and tested fine. There is nothing when I turn the switch (either direction). Does anyone know where the safety/neutral switch is...

CAN ANYBODY PROVIDE ME WITH THE YEAR OF MANUFACTURING OF THE FOLLOWING FORD 555: VIN NR: ES93864 ENGINE NR: D 793591 MODEL: DF6A14 TRANSMISSION: 4J04B SIDO:527963 I ALSO WANT TO KNOW WHAT MODEL IT IS: 555A.555B,555C,555D, OR 555E

About a year and a half ago I bought a 555 TLB. The previous owner only used it a few times a year...if that. I've only used it a few times as well. When I bought it, it would start easily if it had been run within the past few weeks. If it had sat longer than that it needed a very small shot...

I encountered a problem this summer as I was working the old Ford on moving some dirt in our hay meadow. I would stall it out, and couldn't get it to start again. I bled the injectors, hooked it up to a shop battery charger (225 amp) and got it to go doing this, but after reading the shop...

Hi there, This is my first purchase of this kind of equipment... Looked at a 1984 Ford 555 a few days ago. Asking price is $14,000. Clocks show 1296 hrs and 17,000 miles. Has an extra hoe bucket and a set of forks. Found small cracks starting at sides of 4-in-1 loader and also at some factory...

I need to know how do you change the transmision fluid and what kind of fluid do i use?

Thanks for looking in - Manual calls for Ford 134 - what compares to that? I've read UTF is for hydraulics, p. steering, and trans but is the rear axle different?...90w gear oil? Thanks

I recently bought a 1980 Ford 555 Backhoe from a neighbor. It was in pretty good shape, but I had a local tractor mechanic go through it and repair the radiator, adjust the brakes, do some welding and a few other tweaks and fixes. Got about $7,000.00 into it total and everything is operating...

Recently bought a 1980 Ford 555 TLB and want to change all fluids and filters. It uses the same oil for the trans, hyds, diff, and PS. NH specs Ambra 134 G. I got a nearly full 5 gallon pail with the tractor. I still need to buy 7 pails. Price for the NH oil is around $570. I can buy 7 pails...

What do I need to do to pull the hydraulic pump driveshaft? Will I have to pull the hyd tank, cooler, pump, and the radiator? Looks like an access panel under the radiator, but looks like I'd have to take the oil cooler out to be able to remove the panel.

I recently bought a 555. The previous owner wasn't very good at keeping up with routine maintenance. It doesn't look like the hyd pump driveshaft has been greased in recent years. I couldn't get the zerk on the front u-joint to take grease. I took the bolts out that hold the pump and...

I recently purchased a 1980 Ford 555 TLB. I plan on changing all the fluids and filters. The owners manual specs the following lubricants: Power steering and trans:M-2C41-A Hydraulics: M-2C48-A Rear axle: M-2C53-A I've read on this and other forums to...

I'm going to be looking at a Ford 555 with ex-hoe and shuttle trans in the next few days. Seller doesn't know if it's an A or B, just says 1980's. Anything on the 555 particularly trouble prone that I should be aware of? Pops

I have an old Ford 555 and have always used had an 18 inch wide bucket on the backhoe. I have a large trenching job coming up and would like to upgrade to a 30 inch wide bucket to speed up the job. I'm wondering if my machine will be able to handle the larger bucket in clay soil. Any opinions?

Hi, I have an old Ford 555 that I have owned for about 20 years. I have since owned newer and fancier units but have always felt most comfortable on this old boy.

Hello all, I am a new post and am having a hard time with finding a good parts supplier for the 1979 Ford 555 I just purchased. I have the factor service manual, and the owners manual but not the parts manual. In regards to pins and bushings i dont know if i should purchase the parts manual...

Hello Everyone, I am new to posting here. I have done a lot of looking around and reading, but have never posted. I have found a 1978 Ford 555 tlb locally and the guy wants 7k for it. I tried talking him down from that, but he is firm on that number. I have checked the hoe out and other...

Hello All, I have done very little posting on here, but a whole lot of reading. I enjoy learning from the past experiences of others. I have found a 1994 Ford 555 backhoe 2wd for aound 10k. The owner has been using it on his farm. it has 8k hours. He tells me that the engine is very strong...

Hello. I am trying to figure out what I own so I can get a manual and know what I have. I was told it is a 1984 Ford 555 backhoe loader. I was able to get some information from a plate on the engine. It says: BSD Power Product Serial D 913200 Model 333H BSD Part (fuzzy with this - not clear)...

A branch put a hole in the transmission fillter and I lost all transmission fluid. I shut the tractor down immediately, so I don't think any damage ensued. I installed a new filter and refilled the transmission, but the transmission won't go into either drive or reverse. Being an optimist I am...

I have an older Ford 555 (late 70's) and it has a power reversing transmission. The problem is it acts like a car that is low on tranny fluid. Going into forward, sometimes you have to wait or throttle it a little before it will engage, on the flat, it seems to always go into reverse. Anytime...

WOW I can sure use some help here on this one. My left side stabilizer drifts down in a matter of minutes. I replaced the packings in the cyclinder and removed opposite line no fluid coming out so the cyclinder is ruled out. I need to know how the fluid flows in the valve. I believe there only a...

any know the approx weight of a late 70's/early 80's Ford 555 loader backhoe ? I need to get a trailer for this, but I get conflicting advice, some guys say a cheaper 14k gooseneck trailer is plenty, others tell me that I need the more expensive 20k# trailer. Any advice is greatly appreciated.

I was using my 555 backhoe yesterday it moved kinda slowly and I looked down had puddle of hydraulic oil from transmission on ground . It is leaking from access plate with 4 bolts when removed you can see torque converter cant tell exactly where leak is any suggestions ??? Ill have to do repair...

I was using my 555 backhoe today it has tranny with no clutch just forward and reverse lever. It started leaking oil out of access plate on tranny . The one with 4 bolts and plate comes off and you can see torque converter. Any ideas is it dead and how complicated to repair any suggestions will...

Bought a Ford 555 TLB. Before ordering manuals for it ( everything works fine now but when the inevitable happens it's good to be prepared..) I really need to know what year & possibly letter designation after the 555. Machine was painted & has no Ford Graphics. Serial # CB54940. Torque...

I've been looking for a used 555 and noticed that a lot of them have rebuilt motors with only around 3000 hours on the machines. Seems like the engines didn't last too long before needing a rebuild. Any inside info on those motors? Thanks.