conversion

I have a battery powered dump trailer lift which is work fine, but I am tired of buying new batteries for it and I am not using it behind the pick up anymore. So I would like to power the lift from my JD 5425. So I would need to run some cable from the front of the tractor to the rear, mount...

Hi all, I am searching the web for some examples of converting solid ROPS into folding. I can't find much out there and am honestly surprised there aren't any pre made options out there. I completely understand this is not ideal and potentially not safe, but I am also sure that something can be...

Anybody have great experience with a rust conversion product? Just bought a machine that spent a lot of time outside and it has some heavy rust on the cab and the attachments. Plan to wire brush and then treat with a conversion product before painting.

Hey guys. Have had this tractor a while and works amazing and starts great especially in our cold winters. 1963 i think mf202 I have a 6.5mckee Snowblower that runs off pto 540rpm The reverse gear is not shuttle so i move quick and clog up somewhat often. I am tired of kinking the neck...

Ahead of the recent ice storm for our area, I dusted off the generator to be sure it was okay if needed. Thankfully, our area was spared. I changed the oil & put a teaspoon in the spark plug hole, and changed the spark plug. It cranked on the first pull (after being stored for 5+ years). It...

Iam looking to add a quick attach conversion to my model 75 loader on my Deere 850 tractor. Was wondering if anyone has done this and what I might want to watch out for. Was considering purchasing A weld on unit from one of the Chinese manufacturers or are these junk? A Pin on unit made...

I have a tractor with 12.4-28 tires on it and I see there is a coversion tire that is 320/85 R28 Will these fit are they the same size? will they mount the same lookslike these conversion ones are radials ?

Anyone have experience with this seeing as I made the decision to keep my Sierra and outfit it with more useful options as miles add on I want to take care ahead of time what some call that generations Duramax lml I believe "Achilles heal" cp4 pump is known to self destruct taking out fuel...

Recently bought and assembled a cheap Chinese 70" utv plow I'm planning to weld to a blank 1/4" qa front loader plate which I'll use on my 21hp subcompact tractor up north. Currently have it set up to be 71" wide majority of plowing is me keeping it angled. For clean up I usually...

I have a JD 855 1995 that uses the rockshaft to lift the mower deck. How to I convert to using the SCV to lift the deck. My older 1994 had this feature and I prefer the SCV to lift the deck.

I got a old wood splitter at an auction and someone in the past had made it 3 point but it hit my draw bar so I re worked it.

I have a 2022 X370 and I was hoping to convert the forward/reverse foot pedal control to a hand control. I’ve read some articles but my linkage seems to be a little different. I haven’t made anything up yet but the few times I’ve had an idea for mounting a rod or lever on my pedal, the break...

Hi everyone, the title pretty much explains it. I just bought a cream puff 2006 790. I’m using it to drag a 60” roto tiller and a 1000gallon water ag trailer. Id like to know if there is a kit or the easiest way to convert it to 4wd. It looks like all I’d need is front axle, drive shaft and...

I have a DIY snowcat I built ground up with 1 ton differential/brake steer configuration that is somewhat spartan that I'd like to convert to hydrostatic drive. I'm a newb in this compartment, so bear with me. Looking for initial build ideas/concepts before possibly venturing down this path...

I am looking for a conversation kit to make one side of my bench grinder into a belt sander. I saw one on amazon that was pushing $300. At the price, I would jsut buy a specific belt sander. Or, any other less expesive options please.

A local guy on craigslist sells "Miva" brand 58" sickle mowers intended for 1-2 ton mini excavators for $450. I couldn't resist. I bought one. I had leftover parts from my post hole digger conversion project that worked out nice to make a pivot mount for this on a ssqa plate. the storage...

Does anyone have information on installing a Delco single wire alternator on a 2006 Jinma 304. I'm tired of all off and on again charging problems with the Chinese alternator. Would appreciate any help. Kenny

will the turf tire rims work for the R4's or will they require new rims? Does anyone know where to find the actual tire sizes for turf and R4 on this tractor?

Has anyone carried out a dynamo to alternator conversion on an MF135 ? I'm in the middle of the job and have come against a problem - The original dynamo tensioning arm does not fit with the alternator, it sits on the wrong side of the alternator casting and fouls on the pulley fan. Looks like...

Good morning! Is there an adapter out there on the market to connect to the Branson quick connect that would convert to the skidsteer quick attach or do I need to weld it up. I was hoping for something similar to this JD adapter.

I just bought a used John Deere 850, 1981 model year. It has a transmission PTO. Does anyone know if the PTO on this tractor can be converted to some sort of continuous/independent PTO ?