ji case 530

I just drug home a new to me 1963 530 CK... Will have several questions... It is a dry clutch shuttle shift trans and I haven't had any luck looking up fluid capacities... Steering wheel SUX... gives me a rash every time I touch it... fiberglass impregnated??? In my searching so far it seems...

any way you can walk me through a diagram of the hydraulic hose routing for the loader from the pump to the they valve to the cylinders on a 530 ck? This is the model with the backhoe aswell Ive just finished rebuilding all the cylinders and got them on the loader but want to double check im...

I am rebuilding a 1966 Case 530 CK backhoe with the base tractor being a 530. The engine turns over by hand just fine, but I want to rear it down to clean and inspect it to see what needs repaired/replaced. I am having trouble getting the head to come off. I have removed the manifolds, rocker...

Hi everyone, I just purchased a 1966 Case 530CK backhoe. It has a model 32 loader and hoe with the hydra-lift system. It was in a junk yard and I paid the fellow $1000 for it. It came with 2 extra hoe buckets. There was 3 4" maple trees growing up through it, so it had been there for a while...

Hello everyone, I have a loader that is supposed to be a Case 530, the rims are shot, and I am trying to find another set to replace them with, but everything I have seen is 8 lug. The rims on it do not have the separatable center.the tire size is 19.5-24. Does anyone know an interchange, or how...

case 530 manual desperately needed, started a new project aand need info Curtmiller295@gmail.com

I gave it a quick look over and jumped in with both feet first. I really have to stop doing that. LOL. I really believe it has good bones and just needs some TLC. Hour meter shows 3131.2. By using the parts book I have narrowed the SN to be a 1962 or early 1963 model. It has a really heavy...

Greetings. My Case 530 rockshaft has lifting arms that I cannot identify anywhere. The arms are equipped with a grease fitting and the arms that attach to the lift links looks like they could rotate within the lifting arms. I am asking for help with any information on this style of 3 point...

hello all, newto this forum group. got a question. I recently got a 1963 case 530 loader backhoe,road hard and put away wet !! looking for info on finding a new or used spindle and steering arm for the left front.mine has been broke and welded back together and is very sloppy. any ideas??

Hi All, I have a case 530 with a 31 Backhoe and yesterday when I attempted to lift the boom none of the backhoe controls worked. It was like the machine wasn't running. I then tested the loader and it lifted fine. I then tried the rear controls and as I tried the bucket the high pressure hose...

I am looking for qty of 4 fuel injector sleeves part number G11724 anyone know where I may find some. thanks in advance.

My son is the new owner of a Case 430 or 530 loader/backhoe with missing identification plate. So far we are pretty sure it is a 530. Now trying to figure out year and if AG or CK. Many of the posts reference a site microtech.com including that there was "in the menu on the left, full service...

Hi Everyone, I recently bought a small piece of land to build a house upon for my family of four. Two weeks later, I was asked to help to move some equipment from a property when I saw an old Case backhoe loader sitting abandoned and asked what was going on with it. Turns out the owner had...

Hey all, Looking at a well used Case 530 backhoe (around 1960)... it's seen better days but I think the owner would let it go pretty cheap. it does run and shift well... everything is functional but the boom doesn't stop when you come off the controls... it will continue to swing in the...

OK..its a 1966 188 DIESEL CASE 530CK ...I believe it sucked in alot of water through a auxilary tank that previous owner put on...I was trying to get some wood moved before i replaced the fuel tank and it just died...(like I pulled the fuel cutoff but with white smoke).. So, I drained tank...

So..I've searched all over the web and can't seem to find info on this.. Does anyone know if the fuel tank can be pulled with the loader on? How do you take the model 32 loader off? (my spacer over fuel tank between loader arms seems to be stuck) Anything I am missing? Take nut off, support...

Recently picked up a 64 CASE 530 Farm Tractor. I live in the foothills on uneven terrain. Any chances of me finding a new or used ROPS for it? Would I be better off having one made? Thank You

I was recently given (yes given) a 64 CASE 530, diesel with a FEL and Box Scraper. I have a small property and I plan to use it to maintain the gravel driveway and some small tasks with the FEL such as moving firewood and boulders. So far I really like the tractor. It is a little beat up but...

Case 530 pto clutch needs adjusted my parts books shows how to adjust the kind that has a pto clutch in the rear of the tractor, Mine has the hand clutch about mid body on the tractor in front of the gear shift on the left side of the body.

I have a Case 530 model 541 the pto hand clutch lever is middle ways in the tractor body in front of your left knee if you was setting on the tractor. The clutch itself is inside the main body. How can I adjust it? Most of the other 530's the pto clutch is behind the rear end of the tractor...

Hi folks- My issue is I've drained all fluids and replaced with high dollar case fluids..My question is I've refilled the torque tube and hydraulic reservoir through the breather next to the shuttle shift. I now have NO reading whatsoever on the dip stick?? I'm lost... Everything I've read told...

Working on a Neighbors old 1960's CASE 530 CK with Backhoe, No Fuel Getting to the Plugs. Can someone give me some tips about troubleshooting and adjustment on these Carbs, I'm not sure what's what as far as adjustments. Will NOT start even with Either HAS SPARK to all PLUGS, Plugs are...

Hi- does anyone know where to find this. I'm having no luck on ebay. The cap has G1353 stamped on it. I need the retainer for the filter as well. When I pulled this cover off to replace the filter I found it had none..ughh. I hate that. Its a cheap filter. Anyways the cover was broke and all the...

I am trying to find some lift link and leveling box for my case 530, or if anyone know of a different brand that fits. Thanks,

Some years ago I sold the '48 Ford 8N that I used around my house. I had it up at my place in the mountains, but it was not heavy enough to do work up there. Also with the well worn motor, it barely had enough guts to pull itself up the mountain, much less a load of dirt. I also sold my Cat...

After years of wanting/needing a rough terrain forklift, but not really having the budget to justify one, I found this Case 530 on Craigslist - and only 15 minutes from my work! It was a lucky find. A small family owned construction company had listed a bunch of stuff for sale and it was put...

Hi All, I was wondering if I'm missing something or not... where my top link should mount I have (2) 4-bolt cast brackets about 10" apart w/ 1" hole in them. Am I missing a bracket or does the top link just slide on to a bar that spans those brackets ? Any help would be appreciated or pictures...

Hi , looking for help with a Case 530 utility with a HD front axle. Right spindle is loose and in need of repair. Need to know how to disassemble and remove pin and bushing. Pin moves approx 1/2" . Also need recommendations on repair, i understand that there are very few parts available for the...

Hello I have a question in regards to the tractor i have just inherited a 60s case omatic 530. It has no 3pt on it but does have a pto I am wanting to find a tiller that i can attach to this tractor .Can i use a 3pt tiller on this tractor or do i have to buy a 3pt for the tractor. Is there a...

I made a poor decision and bought a 1966 Case 530 CK with loader and category one three point. I like the Case load leveling loader, you never get material dumped back on the hood and your self. Thought it would be no big deal to repair the High/Low & forward/reverse, well I was wrong, the parts...

I'm still trying to get this backhoe attachment to work good, and wanted to know if there was a separate pump for the 3 point and remote hydraulics. The reservoir is in the torque tube from what I can see, and the valve assembly is above the torque tube, but is there a separate pump or does it...

Hi, If anyone has a tractor like mine I could use some help. after having a cylinder rebuilt on my 3 point hoe I now have no hydraulics at all at the rear hitch. I don't know if the rear is seperate from the loader hyd. and low on fluid or if its just air but I'v been trying to bleed it all day...

Done a lot to this beast and now it is time for the electrical. It currently only has an alternator with no wires. I would like to have the alernator charge the battery and run some lights. Do I need a voltage regualtor between the alternator and battery? Can I just run lights right from the...

Hi, I'm a new member and I had a question, I'm trying to hook up a woods backhoe to a Case 530 Loader only and I'm not sure where to hook the hydralic lines to. It had two remote fittings at the rear that the manual says were for a cylinder, I hooked up to them but when I pull back on the rh...

Anyone know the procedure to remove/install the swing cyl's on a 530? When the cyl's are disconnected, can other cyl's be operated w/o loosing oil, or do the hoses have to be plugged? Cheers...

Dear Friends, I have a front-end loader on my 1962 Case 530....Armstrong powersteering leaves something to be desired. Looking for suggestions/leads as well as an estimate of costs involved in installing power steering on this tractor. Thanks, John S. Reese

I have no power in my power steering. I can barely get the wheels to move when its not moving. It has been sitting for a while, and I'm not sure it ever worked when I moved it last time. The resevoir was pretty empty when I checked it today, and a bit milky, so I put in more fluid, same...

The gauges on my Case 530 are not only not working, but they look so sad. What should I do to make it look good? I don't want to go overboard on this little sub-project, but something needs to be done, and just getting some round gauges to replace the stock bezel is not one of them. What...

Hello, I am the proud new owner of what I believe is a Case 530 CK. However, the seller thought it was a 1953, and the 530 CK was '60-67. Looking at tractordata serial numbers, the one on my dataplate isn't even close, it is a 4063xxx. It certainly looks like a 530 CK from other pictures I've...

What is (or where can I find) the proper tire pressures for my '64 Case 530 loader backhoe? Also, what is the shift-lever on the right hand side between the brake pedals & the steering wheel? Is it a high-lo range or some kind of torque converter control? Thanks in advance!

New to tractors in general and the Case 530 in particular. I am planning on fixing up the brakes first. There seems to be alot of brake shoes for the 530 on ebay. Anything in particular I should be on the lookout for?

i have a case 530 that i need to adjust the pto clutch. it has a live pto and when it get a load on it the clutch will slip.

My parents picked up a Case 530 tractor, data plate says model 31. The frame is red, the tin and implements are yellow. I'm unsure if that means anything about its build. I've never worked on any old tractors, I've mostly stuck with trucks That'll be the tractor. We have a slight issue, we...

We have a little of the newer (NH TC33D) and a little of the older (Case 530). Recently we acquired a Jacobsen T422D, primarily to mow lawn but have seen a need to outfit it with a snow blower. We are interested in anyone who has had history with the Jacobsen.

Hi, I recently purchased a 530 w/model 31 hoe and loader. It is not a CK as far as I can tell. It has the COM transmission and is missing the ID plate (of course!). The fellow I bought it from was guessing that it was around a '72 but the little info that I could find seems to say that they...

I'm in the market for a new tractor and have pretty much decided on a Mahindra 00 series and with the incentives, I'll probably go for the 6500 since it can do all the work of the old Case 530, plus take a lot of jobs from the Ford 5000 we have. That said, my question is: Do you think I'll get...

construction-ML-903037-ML- Construction equip, not tractor related.

I've been looking for a project here lately and really love the 60's model Case tractors. I've decided to restore/refurbish a 430, 530, 630, or 730; or maybe even one of the earlier 100 series or the 70 series machines. If anyone has one in decent shape, or knows where I can find one, please...

I'm a first time buyer on a small budget. Reasonable mechanic, grew up on a farm. My budget is small and need a capable machine for excavating, building some terraced rock walls and major landscaping. I'm looking at a 1970 Case 530 model 32. It has a serious backhoe, FEL, and is gas powered. It...

Hi I pulled the carb off, it was leaking gas so I figure its a good time to clean it up and check the N&S and see if the float has any rot holes. In any event its a 13106 Zenith, now all apps show that to be for a 580 Case Now I have had this for 4 yrs, but it is possible it was replaced yrs...

I recently aquired a Case 530 with loader and backhoe. The unit is in fair condition with some repairs/maintainance needed, but it runs well and works well. It is a diesel. Are there any problem areas on these units I should be looking for? Any special quirks or operating issues? I plan to visit...

I'm borrowing a friends Case 530 Construction King TLB, and need to replace the points. Can anyone tell me what the proper setting for point gap is? Thanks. Brian