box

I'm getting hydraulic lockup when operating the new grapple with the rear hyd point on the Kubota M8540. I have both Summit and Dixon QC.

Because I saw another insulation post I thought I could ask one here. I have 2x6 stud walls. The breaker box is about 3 inches deep so there is a gap of about 2 inches or more behind it without insulation. This is on an exterior wall of the house but inside of course. Can I put...

They are sold by Menards. Any thoughts or opinions about them? This 41"Wx24"D caught my eye. https://www.menards.com/main/tools/tool-storage/tool-chests/masterforce-reg-41w-x-24d-19-drawer-rolling-tool-chest-cabinet/2907733mml/p-1642874314320689-c-9188.htm

Any one have any idea of tool box for this machine MT242E.

The LED display on my break away box is getting pretty rough from exposure to the weather. When I used it last week or so, one of the wires broke off of the sealed charging circuit. So, I think I will just replace the whole box. The trailer mostly sits so I remove the 5 AH battery and put it on...

I was running my old KingKutter bush hog through some fairly heavy brush when it started sounding more rattly. Upon looking I saw that all four of the bolts that hold the gear box onto the top of the deck were loose! I guess I need to get the stump jumper out of the way so I can hold the nuts...

I'm trying to mark something as SOLD in the classifieds, but when I edit the ad there is no check box where it says to check the box when sold. I tried this on both Safari and Firefox with the same results.

Backstory: We've got a spring box on our property that is fed by an underground spring. We have legal access and usage of this water. There currently is an underground cement/cinderblock box, the top of the box is at grade level and has a 18"x18" access hatch, and there is a pvc pipe overflow...

I've just picked up a really nice little YM1820(see below) with the usual tractor wiring issues - I suspect connections behind the fusebox would be the main culprit. Ignition switch partly works but previous owner had bodged two wires to be joined under the the bonnet (hood!) to start her up. As...

I have a neighbor that is about to buy aZtrak. I have an old 655 that in my mind is much more solid then what I see at HD, Lowes etc Any opinions?

I have an affordable somewhat entry level 8' Land Plane for my MF-5711D that works well for its intended usage however, it is not a BOX BLADE! I need to get a box blade that will take the abuse my tractor can dish out so, ABSOLUTELY no Tractor Supply, Atwood, etc. level recommendations, please...

Hello trying to fix the seized levelling box for the 3pt today, got the top cover off and scooped out all the rust and ancient grease, applied heat and oil and got the handle gear freed up but the shaft is still stuck. Question, is the shaft supposed to turn at the top where it meets the gear...

I've seen ads for a leveling box assembly. Can someone tell me what the purpose is?

My Cub Cadet SLT 1550 is blowing the 20A fuse as soon as it is inserted, even with key off and ignition switch unplugged from the back. It reads 12v DC at all times across the fuse box. The red/white striped wire that leads from the fuse box to the DC alternator has continuity to the frame of...