3 point hitch

  1. S

    2017 Boomer 54D 3 point hitch stiff

    The lever on my NH 54D that operates the 3 point hitch has gotten increasingly harder to move. Stiff as a board. No problem holding implements, just hard to move. Any thoughts? Thanks in Advance
  2. The Gaul

    3 Point Hitch slow and unintended dropping

    Need some help getting to the root cause of my 3 point hitch dropping slowly and unintended. Tractor : Kioti NS6010 Hydrostatic transmission, 60HP Symptoms : 3 point hitch drops slowly when it is loaded with the weight of e.g. my flail mower. Over about a quarter mile of riding it will go from...
  3. S

    Need to know where the test port is on Farmall 110c for 3 point hitch

    I am putting an accumulator on my Farmall 110c for the 3 point hitch. I believe the port is right under the cab but no one at my dealership can tell me for sure. I have also heard it may mess with my draft control but will worry about that more when I figure out where to hook it in. I believe...
  4. N

    3 Point Hitch Problem

    I have a 1980s JD 770. The 3 point hitch rubs the tires and sway link turn buckles break if tightened enough to keep 5 foot bush-hog from rubbing tires. Is there a 'telescoping' sway link assembly available somewhere for my small tractor, like the one on Deere larger tractors, sliding metal bars...
  5. R

    jerky 3 point hitch

    I bought a new mt235 LS in April 2024 3 point hitch has been jerky since I bought it. Took it back to the dealer was told it is not suppose to be like that. After keeping it for 2 months was told they all do that. contacted LS USA customer service with little help. Does anyone else have this...
  6. D

    Top link/side link wrench for Kubota etc 3 point hitch adjustment

    This wrench is for adjusting the top link or side link on a Kubota 3 point hitch. It's made from 1045 tool steel and has been hardened and tempered. I needed to make this wrench for my own Kubota L3901, and since the tool worked so well, I wanted to see if others would find it useful. $19.95...
  7. T

    3 point hitch set up for Dk

    Other than the dealers, any place else to purchase the 3 point hitch set up for the Dk series tractor? Post the link below. Its appreciated.
  8. Hersheyfarm

    Should have listened to Hay Dude…lol. New massey 5711 3 point hitch gone wacky.

    Plowed about 3 acres and then this started happening. The hitch would raise all on its own and sometimes just sit there and go up and down, wouldnt stay in set position, just a mess. Worked good for a wile. I called the tech at dealer and he basically said i just need to adjust knobs… well they...
  9. S

    TC45D 3 point Hitch stopped working out of nowhere

    Hello. I have a tc45d tractor and I was using it today all morning. I lowered the 3 point hitch, got off the tractor to move something, then got back on and the hitch will not go up. I looked at the contol lever and it is hooked up and moving. I checked the oil level and it was good. everything...
  10. Rapp@BlueRidge

    International Harvester Chisel Plow 3 rows / 7 tines

    Chisel plow with 3 point hitch; heavy duty implement; 3 rows of plow tines; 7 tines (movable with spring reliefs); points are sharp (not worn). Bought used in good working order. Used once to plow 4 acres. No problem to pull with 50 hp tractor in hard clay soil. Located in Amissville, VA...
  11. L

    SATOH S650G 3 point hitch not holding

    Attachments bob when raised, I was dragging a disabled trencher out of a ditch with the 3 point hitch, lifting and dragging, and something gave, I have the sub control valve removed from the tractor and need advice on what needs repaired or a repair shop near Batesville Indiana, any help will be...
  12. beowulf

    3 point hitch carry all as a road maintenance drag?

    We had a new road cut and 3/4 crushed rock laid - about 500 feet and 10-15% grade. We also have another driveway (800') I maintain with my grader blade (nice crown there). Anyway, for the new road, I have used my box blade and grader to spread the crushed rock, but not ideal - doable, but I am...
  13. W

    Old tractor front loader weird hydraulic connection

    Hi all, I'm new here, in fact this is my very first post. I have an old Shibaura SD2843T (equivalent to a Ford 1700/1900) and it has a front loader that looks like its connected hydraulically in a very weird way. It seems it goes through the 3 point hitch hydraulic, what I mean is that the...
  14. Jesustx

    JD4300 with 430 ballasting question.

    I have a JD4300 with a 430 front loader and I would like to know if I could substitute the fluid filled tires ballast with more weight one the 3p hitch. I am currently in the middle of fabricating a 3p hitch receiver to carry those ammo cans filled with lead. As per the manual, it requires a 3p...
  15. A

    Hydraulic pump TC 29 New Holland

    Need help with hydraulics not working. Is the pump bad or do I have other issues? The hydraulic pump is real noisy when I try to lift and takes a minute to start lifting 3 point hitch.
  16. R

    New holland ts 110

    Looking for a service manual for a new holland ts 110. I don’t think the 3 point hitch is going down low enough
  17. F

    Upgrade Kioti DK6010SE 3-point Hitch

    I'm getting a used Kioti DK6010SE and only realized recently that it didn't have the telescoping and sway/stabalizing bars and draft links. Was doing some Googling and I can't seem to find the part numbers or 3rd party kits. Can any Kioti owners point me in the right direction?
Top