Search results

I have a CT 335 my glow plug light started not coming on when I turn the key on if it's warm out it seems to come on and work fine but if it's cold it will not come on. Any ideas what could be going on I was wondering if it might be a relay. Thanks

Hi All not sure where I have read about the 3 point single plow from like tractor supply but I was wondering if any one has used one to make trench for a water line? My questions would be how deep does it go and how wide? Thanks in advance for any help.

Hi guys I have tried searching but no luck can anyone tell me what type of oil goes in the hydrostat transmissions? I have zforce 48 inch zero turn. I have one lever that is acting weird compared to the other The fluid is just barely at the bottom of the tank don't even cover bottom.

I have a 2001 Polaris 400 4x4 I have replaced the rear boots on the rear axle twice already. For a long time now it has been making a loud clicking noise from the rear axles is worse when turning I didn't think alot of it my buddy has a 2002 400 4x4 and his started doing the same thing very loud...

We have had a small pool about 8 ft across for the last ten years and have loved it so I bought a new pool this year. It is 24 ft across and 52 inch s deep so far we love it. Now putting it in was alot of work here is a few pic's if anyone els is thinking about putting in a pool.

I have a Z-Force 48 inch and I live in very sandy ground I mow atleast 2 acreas sometimes more most is just grass some is very weedy. I have been sharpening about twice a season.

Worked my bobcat ct335 for 16 hrs this last 3 day weekened and now i am leaking anti- freeze. It seems tobe coming from right side of the radiator got it home late last night and have not had time to look it over good. Was wondering if any one els has had trouble with a leak ? and if radiators...

We had about 10 in of snow over the weekened with alot of wind also snow was very heavy and wet my neigbor drove to far in to a drift and could'nt back out more operator error then any thing els any how i got to pull him out with my tractor with a smile but tobe honest he may be pulling me out...

Was pileing ceder trees awhile back and i got to far into the pile and one of the trees came threw my push bar on tractor and smashed my grill I heard it and got stopped before it was to bad. So i built a shield to go on the front of my tractor works great. I made it to come on and off very easy...

Thought i would share this with everyone. I was pileling ceder trees and it was very thick and alot of brush anyhow i went to dump trees in to pile and my forks would not tilt but about 2 inches. I got ceders off and backed up and checked tractor over my loader would go up and down no problem...

Moved big round bales with my ct 335 and my pallet forks worked great.

Hi guys i am just about ready to start on my tractor shed been gather supplies for long time now and think i am about ready to start. have a couple question that maybe some of you that do this for a living or are just lot smarter then me can answer. I plan to make my shed 24ft x 32 ft with 9ft...

We were getting our food plots ready this year, i plowed, Disced and moved trees for 5 hours what fun and my CT 335 never missed a lick i love working with it. Plowed up 2 acres of virgin ground with my Dearborn 2 bottom plow worked great. Pic of my tractor loaded and ready to head to our...

fast and easy trailer mover my rear bobcat blade has holes for differant angles i just hand screwed a trailer ball in center hole just remove if i need to spin blade throw ball in tool box works great.

Just finished my 50 hr service wasn't bad at all. Engine oil and filter was cake, hyd and hst filter wasnt bad at all either adding the hyd oil back in was kind of a pain as it went in very slow kept air locking not sure what you could do differant just pour slow is what i did. when i went to...

Been on the bob cat site for awhile looking for a new mower and been looking at cub cadets looking at the RZT 54 with the Kaw motor for about 3,600. and looking at a Z force 54 inch with Kohler and a steering wheel for about 4,700 anyone have any input good or bad or which mower would be best I...

Hi all not sure if this is the right place to ask this but I am looking at buy a Cub Cadet RZT 50 inch zero turn 25 hp v twin mower . Can anyone tell me anything about them good or bad? This mower here is about 3 grand I know there is better mowers out there but alot more money. I plan to start...

Here are a few pic's i took while working on my driveway.

Hi all i am thinking of putting up a pole shed. Planning about 30 ft x 36 ft i just came into some used tin off another building so plan to use it i also have a bunch of teleophone poles to use. Plan to go with a dirt floor for now. any advise or input would be great

Hi all just called my dealer and checked prices on filters and oil. Here is what he told me Engine oil 15w-40 buy anywhere Bobcat filter $7.70. Hydrostatic filter $77.60 Hydraulic Filter $23.77 Hydrostatic fluid Bobcat $44.05 for 2.5 Gal jug and he said gear oil 80w-90 for front axle from...

Just brought these home cant wait to hook them on my ct 335

Hello can anyone help me I dug down to find the lid on my septic tank. I have a poly tank from the way it looks has about a 24 in black plastic lid it has a arrow and say's open but i can not figure out how to get it off i tried prying short off breaking something i turned it all the way around...

Hi guys any advise on which disc will work better for me? 3 pt or about a 11 ft pull type disc. I have food plots that i will be useing them on . I have tried the 3 pt but have never tried a pull type. I plan to buy one of the two this year and didnt know which would be best was hoping to...

Been so serious here latly thought i would post a show your cat at work thread. Lets see what people have been doing. Here is a pic of Laurie hauling hay getting cold here be moving snow soon. Happy Thanksgiving all.

Winter and cold weather is on its way here in Nebraska. What do you guys use for winter fuel? I have used power service in diesel before and also run number 1 diesel. both worked well in trucks and busses i ran just wasnt sure if wanted to do the same with my ct 335.

I got the bobcat 7ft rear blade with my new bobcat. I really like the idea that it was adjustable sideways. I was going to blade the ditches on my driveway so i was going to shift the blade all the way one way to reach farther down in ditch when i tried to move it i noticed the the rails were...

Honey do's are so much easyer and alot mor fun with my new Bobcat I find a way to use it almost everyday here i am moving some gravel and spreading it out on driveway and othe pic is me cleaning out horse pen and spread it in our garden.

Hi i got a john deere 717 7 ft shredder and the slip clucth was slipping very bad so i bought new disc now i am not sure how to adjust it proberly. It runs 4 disc and it has 4 bolts to tighten it any help would be appreciated. Thank You

Worked my cat hard this weekened. Put 15 hrs on it in 2 days plowing and discing and also got her suck once. Even hauled firewood. She came threw it with know problem great machine.

Hi guys i have found a 2 bottom plow the guy dosent no much about it. I was wondering if anyone knows what kind it is? and if its worth $175. dollars. What do i need to look for ? What can go wrong with them? I would want to use it for food plots right away. Thanks in advance .

Hi guys thought i would let ya know how it went for me with my first start on my driveway with box blade. I have a CT 335 HST with a Land pride 25-66 hinged box blade. First off my driveway is wavey like a roller coster so i went and tried to hit all the high spots first which is easyer said...

Hi guys I have a bobcat ct335 4x4 hst and would like to get a box blade but unsure which size? 5ft, 6ft, 7ft, My tractor is about 5 1/2 ft acrross at rear wheels I am thinking i want to cover rear wheels but dont know for sure if this is something you need to do with box blade plus will i...

Just got new to me old phd, checks out ok cant find no name on it anywhere and can only find fill hole on top of gear box but no side check hole? i have looked at others at TSS and noticed the have a check plug about 3/4 up on gear box? when i take out fill plug and look in about 1 inch or so...

I guess the only dumb question is the one not asked. I have to take my ct 335 in to town about 10 miles to do some work but i dont have a trailer to haul it on so would it be hard on it to road it the 10 miles one way to town? or should i try to find a trailer to use? It is a Hst Trany. Im sure...

Can i still use a coupon I already bought my tractor about 2 weeks ago. I didnt know about them. any how if i can still use one I could sure use one if anyone has one they are willing to pass along to me

Is a King Cutter box blade worth buying?? I have heard their equipment is built kinda cheap as is thier price? I am just a weekened warrior with 12 acreas so not to hard on it. Any advice will be welcome .

Hi guys I have about a 1/8 mile driveway and was wondering the diff. and or witch is better a rear blade which I have a 7 ft or a box blade which i dont have but may get one if better . also will a box blade work for snow?

Has anyone bolted a cutting edge on thier front bucket? I see i have holes for one on my bucket. But no replaceable edge came on my tractor there is one on my rear blade that i really like it can be flipped over so you can use both sides. I was just wondering i only have 10 hrs on tractor but...

Hello has anyone bypassed or unhooked the seat switch?? If so what is the best way to do this? Gets old if you are getting on and off alot .

My New Cat showed up today about 4:30 pm. I put it to work right away I got a 7 ft rear blade on it and i dressed up my quarter mile driveway right away. It ran and performrd perfect of course its to early to say to much i will post more as i use it and put hrs on it. I tried to post a cpl pics...

Just bought CT 335 waiting for it tobe delivered was supose tobe here 25 minutes ago. lol Cant wait to play with it just like alittle boy i will post more after i play.