Search results

good morning, looking for an enginw oil filter i can pick up locally.....the engine plate says laidong TE 254 and 15w-40....will prolly use rotella ..... loving this little tractor and attachments(nortrac 5' brush cutter and 140 fel with toothbar) !!!!!! any help? i'd be thankful..... good...

good morning, looking for an oil filter i can pick up locally.....the engine plate says laidong TE 254 and 15w-40....will prolly use rotella ..... loving this little tractor and attachments(nortrac 5' brush cutter and 140 fel with toothbar) !!!!!! any help? i'd be thankful..... good luck...

good afternoon, anyone have a woodmaxx flail? I'm considering a flail mower for about 4 ac. I have a 25 hp tractor...........I'm looking at the 62 model with the cone type blades.... thanks for the input......no flames pls.... good luck, PURA VIDA, bluebonnet2

good morning, looking at yankee warehouse 60" tooth bar.........would you weld it to a bucket?.....prolly never take it off.........light work on 12 acres, spreading dirt, gravel....etc........... just asking.......... good luck, PURA VIDA, bluebonnet2

good morning, is nortrac made by foton?............. just asking........no flames pls.........I just pulled the trigger on a nortrac 25 xt.....will kep everyone posted........ BTW....northern tool mgr's have a meeting at headquarters on aug 4........3 days ....I was told......... good luck...

good morning, has tym fixed the drive shaft issues? this will affect my decision on a 25-30 hp machine........... would like to hear from a dealer......... just asking.......... good luck, PURA VIDA, bluebonnet2

good morning, thanks, I tried to change my profile but it didn't work...sold the hustler and the yanmar a couple years ago.....second thoughts...lol...will keep shopping..its mixed Bahia and Bermuda... thanks again, good luck, PURA VIDA, bluebonnet2

good morning, anyone got a bad boy z-turn 54" with the briggs 27 hp motor? I have a john deere z425 with less than 200 hrs and it is in the shop more than I cut....replace carb, new battery, etc.... stay on a battery tender(auto), non ethanol gas, two sets of blades in two years..annual...

good morning, anyone got the tooth bar on ebay, on a 3016? 59.5"wide $350 ... free freight just asking, good luck, PURA VIDA, bluebonnet2

good evening, i think that the right model number...zero turn mower... anyone have one of these? pro's and con's??? no flames please, just info... good luck, god bless TEXAS, bluebonnet2

good morning, just ordered a JDz425 and was wondering...any of you guys have one? 48" cut, briggs engine..... Any problems with the "stamped deck"???? thanks to all for the info.... good luck, bluebonnet2

good morning, anyone have a troybilt 50" z turn mower? kohler v twin..because of budget issues, i'm looking at the white(tractor supply) and the troybilt(lowes) can't afford a new hustler...thanks to all for the input... good luck, bluebonnet2

good morning, stopped by the box store (Lowe's, 48, etc.) and looked at the JD 225 for a home mower, (1/2 ac.).....looked ok...seating ok, 18---hp, however, no place to drive one..... Anyone here have one? pro's-con's????

Anyone have the small ztr from these guys? I'm relocating to city living and would like to have some feedback.... thank you, bluebonnet2

good morning, anyone using this stuff in their tractor? everything i read is positive.... regards, bluebonnet2

good evening, this afternoon about 3 p.m., my new toy arrived, in bright yellow. . WHAT A MACHINE!!!!!!!!after the first 30 min. or so "mr. jim"(after my dad) took off and did we have fun... .After carefully learning the ins and outs(still learning) i put about an additional 1.5 hrs on "mr...

good afternoon everyone, put 4 more hrs. on "miss alma" yesterday bushhogging,(first this year) she did very well . this approx. 60 hrs. since the purchase last Nov. So for all who have made comments about viet recons, maybe i got lucky or they did a good job . The "razor" (4')cutter does very...

good afternoon, while getting ready for spring, i've been looking at riding mowers. today, i went to the closest SNAPPER dealer(about 30 miles)and they have 2 ea. 28" hi-vac riders, 11 hp BS, ele start, in stock, marked down for $925, plus $25 for delivery ( i don't have a truck yet )...

good evening, anyone got a 4 cycle weedeater? saw one today at the local Sears outlet....$200. looks nice and felt good when i picked it up, not much heavier than a 2 cycle..... let me know and a note to all TBN'rs and visitors, MERRY CHRISTMAS AND A GREAT NEW YEAR TO ALL regards...

good morning, i'm trying to help out a friend. need a crankshaft for a ford 1700, i think these numbers are right---model#700046, engine#34494.....crank broke right in the middle, plenty of oil thanking you in advance... my friend says this part is no longer made.....might even look at an...

good evening, after 8 days by car, and 6 hrs. by UHAUL, i finally got into my new "digs" , now all i say is "where did this box come from?" didn't know i had some much "stuff" in a one bedroom apt. giving the "burn pit" a workout... i would like to thank everyone at TBN for their...

anyone one use this product around heat? i have a break in my "smoker". don't have a welder available, so i just need to repair a seam....most of the heat will be in the fire box, however, i don't want to lose the heat and smoke(less than 500 degrees)...do most of the smoking under 300...

good morning, well here we go....started moving monday.... will be in the new digs by tuesday next week(i'm glad it's only 30 miles from here) will probably be off line within the next 2-3 days........thanks to all for the comments, heads up, and support from all..... will let everyone...

good morning, went to the VA hospital yesterday for a checkup for my claim for disability.... i did not know till about 6-8 months ago that vietman vets has certain claims available to them because of agent orange exposure....having said that, i would like to express my feeling about the VA...

good moring, finished the final cleanup, last inside touch up paint and stain today,(photo under photo tab-home improvements), will start moving next week should be in first week in oct.........gutters and carport this week hydromulching in two weeks, should have some type of yard in...

\"miss alma\"!!!!!!!!!!!!!!!!!!! good evening, put another 4+ hrs on "miss alma" (YM2000) today, just keeps on working today mostly "leveling" and box blade work, however, the guy with the "bobcat" ran circles around me spreading two loads of top soil i would like to say, i am pleased...

good evening, today (Labor Day) put another 4.5 hrs on "miss alma", just kept on diggin', cutting 5-6' stuff mixed with 2-3' saplings, everything OK! , razor cutter works just fine.. tomorrow, will pull my "chain harrow/gate for a while to do some leveling...... no flames here...... good...

good morning, foto of coupler, bluebonnet2

posted a couple of foto's on the photo tab under home improvement gary

stain on the out side

good evening, just finished about 6 hrs. 2-cutting, 2-box blade work, 2-leveling......"alma rose" did just fine, still have a half tank of fuel.....'cept for one thing------gear shift lever goes in circles all gears work just fine, PTO fine(glad i got the clutch override---camo stumps are...

good morning, finished 3 hrs with the box blade yesterday, everything OK , however, the three point hitch hits the tires when i make sharp turns..... anyone use the three point hitch assembly from earnies tractors...internetnet price says $249.....comments pls.... tried to adjust sway...

sorry........... bluebonnet2

good to see you posting, hope all is well with you southern florida looks like hell Did i miss junkman's reunion? did we have red hats and coffee cups good to see all you guys posing, be glad when mark777 get back good luck, bluebonnet2

good evening, found the weights........ $31 for 40-42# shirley equipment, longview, texas thanks to all, bluebonnet2

good morning, anyone know where to get front weights for this unit? looked at TSC webpage, didn't see 'em.... thanks, bluebonnet2

good evening, found a ym2000 today and bought it , here's the deal...... vietnam remanufactured( i know what most of you think about this process), however, we ran the 2000 for over 2 hours, all speeds, gears, with and without a 4' rotary cutter, no smoke, only on startups( about 15 times)...

good morning, OOPS!!!!!!! 2700 had a cracked head, needs more than valve job ............ back to shopping........ bluebonnet2

good morning, cabinets in place, sorry for the foto quality(it started raining) , more trim today and tomorrow, you can see part of the spruce ceiling...

good morning, ran across their web site last night (can't remember, slept since then) any one use these? wheel weight based on lug pattern???? let me know..... thanks, bluebonnet2

good afternoon, seems i saw a post awhile back about safety chains for the front end of a rotary cutter (bush hog) can't find it ....... anyone know where to look? does TSC have these? getting a 5' mower and would like to bolt these on....... 4' would work fine for me since i have mostly grass...

goodmorning, the "shop" you posted on the new photo gallery sure looks nice ...... when we get thru with mine and i rat hole enough money, wanna come build one for me? moving inside mine to start finish work this week(cabinets, trim, etc) next week new driveway supposed to pick up...

good morning, committed to purchase ym2700. dealer is going thru the unit, several of the reconditioning steps include changing the battery, checking battery cables, change air filter,ck radiator, belts, fill with 50-50 antifreeze, check or change all fuses, lights, switches, alt/gen., tack...

good morning, anyone know where to get front weights for this model? brush guard? please let me know... thanks to all, bluebonnet2

good morning, more sheetrock kitchen area bluebonnet2

GOOD MORNING, JUST TALKED TO MARK'S WIFE......HE'S IN THE HOSPITAL FOR EMERGENCY "ULCER" SURGERY.... DON'T KNOW ALL THE DETAILS), HOWEVER HE WON'T BE ONLINE FOR A WHILE. HURRY UP AND GET WELL, GOD BLESS AND WE MISS YOU!!!! good luck, bluebonnet2

good morning, tried to find a thread on this subject, however, seems to be none. anyone using this type engine.....looked at a yanmar yesterday, runs pretty smooth let me know, any feedback. etc. thanks to all............... good luck, bluebonnet2

good afternoon, anyone know about this tractor? 32 hp, 2 cyl. 2wd. wide stance caught my eye.. looked at one this morning, fairly clean. the dealer provided me with his check list and it seems let he takes care of the little things(to long to list here) ........he does all the...

good morning, anyone use one of these? look like a handy item to have around the house....... good luck, bluebonnet2

good morning, any one do business with this company? the have some reasonable package deals w/ 90 day warrenty on the drive line on yanmars...... let me know.... thanks, bluebonnet2

good afternoon, while driving around today,i saw this machine and had to stop and look yanmar 3110, 967 hrs on meter,shuttle shifter , tried 2 ranges and reverse, worked smoothly: start right up, no smoke, oil was black as night, hydralics work ok for me, look like it had a 3 or 4 speed PTO...

another western wall

good morning...... front of the house good luck, bluebonnet2

good morning, got my slab poured to day!!!!!!!!!!!!1 will keep you posted. good luck, bluebonnet2

Good afternoon, I found this in mother earth news...anyone seen this or used one? Looks like a "neet" piece of equipment to have around if you can't afford a BH on your tractor ....... couldn't decide if the post goes here or rural living www.portablebackhoe.com no pricing on the web...

good evening, hey guys, how do i reduce bytes down to 100000 for posting.... ...i have fugi 1300 camera that makes great pic's ......down loaded PIXfixer and irfanview, however when i reduce or set 800x600, the bytes stay the same.. ..thanking you guys in advance.. good luck, bluebonnet2

good morning, started tuesday ....... will try to keep you all posted.....thanks for the input .... i can't my photo's down to size yet, but i'm working on it ...got community water turn on today , electric today or monday, timber equipment on site ...... 12.2 ac. located in north east texas...

good morning, anyone have experience with "small" cattle? i'm looking for an ag exemption on my property.....i can divide 12 acres into two pastures with two ponds .....i was told in texas all you need is 5 head or more let me know.... good luck, bluebonnet2

good morning, anyone have any experience with this stuff .. i have 250' and the previous owner says no problems for 8 years...... a plumber says it ain't worth a **** ..... thanks for the help........ good luck, bluebonnet2

has anyone bought anything from this company? they have a 4 day sale in longview, texas and they have some decent pricing on small general purpose air compressors ...also 5' box blade----$250 , quick hitch----------$90 i'll go look at some of the other stuff too. thanks, bluebonnet2

hey guys....... been coming here for over six months.... when are we getting a new home page thanks, bluebonnet2

good afternoon, i just looked at the new CENTURY 3647, with the new Kukje engine..... 4 cylinder, about 4 inches longer in the engine compartment, looks like a water cooler for the oil filter,( there is a connection from radiator to the oil filter), piggy backed the two hydraulic pumps, (they...

hey chipperman..... on another thread (kioti), a poster says a major announcement is coming soon ......and inside info??????? I can't think of anything to change with the units becasuse the dealers i've visited are doing very well.... maybe amjawa and kutje doing something.....i really think...

GOOD MORNING, HOPE ALL IS WELL AND EVERYONE HAS A CHRISTMAS AND A GREAT NEW YEAR....... good luck to all the ranchers and farmers in the beef "bidness" i have noticed over the past 6 months or so that there are not to many problems with the tractors in this forum... i hope its not a...

I'm brainstorming about loading my tires on a 2535 and looking at the weight of the unit, i was wondering if this really needs to been done .....r4's, fairly flat property, good drainage, etc. loader, BH, box blade this is a fairly heavy unit compared to other in this hp range... thanks for the...

does anyone know how to load tires at home? is there an adapter,special tools, etc. that i need. how do i measure how much is in the tires? all info is appreciated...thanking you in advance.... gary

good evening, has anyone heard from daves tractor. he's located in red bluff, calif. hope all is well with him..... southern calif. is really catching heck according to the news. god bless all in calif. good luck, bluebonnet2

does any one sharpen BH blades, if so, how do i do it? thank you, bluebonnet2

hello everyone this is my first post, so i'll try to keep it simple...... 10+ ac, heavy woods, raw land so to speak i've been looking at CUT's for a while and i've decided on the CENTURY for a number of reasons:::: ease of operations, low fueling, easy access, fit and finish, red (LOL)...