Search results

Changing oil, not sure a full synthetic is worth the extra cost. About 2x the money. Like to know what other members are using in there tractors

Does anyone have this tire on their tractor? If so can you do me a favor and measure the rolling circumference? How: mark the ground and the tire at the contact point. 4wd off. move the tractor forward for at least 2 rotations until the same spot on the tire is contacting the ground. measure...

did call the manufacturer, still made, pn change for tire dealers as they cannot get the 51s3c8 tire only kubota dealer

Been looking for a specific tire made by Carlisle model 51s3c8 a 10x16.5 tire. I need this one for the rolling circumference 90". This tire is only sold to Kubota dealers. The dealer needs the Kubota tractor model this was used on so they can find the part number. Did a search and could not...

Have a bobcat ct445 which is the same as a kioti 45se. I have ag wheels now, need to change to r4's. its a different rim. need at least a 12 inch wide rim x 24 to fit a 14.9x24 tire. Looking for another source other than the dealer. any help finding a site that may sell this rim would be very...

Have a bobcat 07 ct445 which is the same as 45se kioti. Currently, have ag tires want to go to r4 tires. Need new rims for a 14.9x24 tire, can you help with any info on it. my local dear cannot help. Current ag tires are 12.9x24

Like to change my ag tires to r4. the front are standard skidsteer tires, but the rear requires different rims, the ags won't work. Any Idea where I can find a set? In upstate NY but will travel some to get them. tractor is the same as kioti se45

Have a ct445 with cab 9tl loader. Looking for a backhoe. Looks like woods groundbreaker is the choice for most. But like to buy used, just concerned about subframe and where to purchase if I should get this brand. Or did i miss some thread and is there a better choice for a backhoe.

my ct445 will start but there is no tach, cruse, lights etc. 4wd light is dim even though not on. Have the manual thought It had the schematic but does not. Sometimes after a while everything will come on. advice?

Have a bobcatct445 and want to change from ag tires to r4's or they call them industrial ag. Call dealer they do not list these tires any more. If someone owns this tractor with r4 tires can you send me the tire sizes. and the rear rim width. they say the rear rim is the same, but from...

Have a dk45se (really a bobcatct445 same tractor) and want to change from ag tires to r4's or they call them industrial ag. Call dealer they do not list these tires any more. If someone owns this tractor with r4 tires can you send me the tire sizes. and the rear rim width. they say the...

Looking to replace my ag tires with turf or R4 tires. need the rims and tires. Bobcat 445 tractor near rochester ny

Like to change the ag tires to r4's I think I also need to change the rims. I would just go with r4s in the front but don't think the ratio would be right. Not easy

Looking for the size of r4 tires that came with a bobcat ct445 tractor or 450. thanks

Looking for a cost effective way to swap out ag tires for r4 tires. will have to change the rims to do this..also ct445 tractor

Need to add some hydraulic fluid to my system nobody Cat dealer near me so I was wondering if Tractor Supply would have an equivalent but I can't find the spec

The bush hog slams hard on start up, worried about breaking the pto gears. does have a shear pin but can I put something in between the pto and bush hog to prevent this. Tillers use a spring coupler, would this work?

Anyone have one? wanted to see if its worth buying

Looking at a ct445 with a factory cab 9tl loader 400 hrs hydro. from pics looks to be in very nice condition. Anyone know what the original selling price was for this configuration? assume no remotes. Any know issues with the tractor? I know relays were a problem. Are the loader specs...

Looking for a used head and a head gasket for massey 1540. Any aftermarket parts for this tractor or is it dealer only parts?

Not much traffic here but here goes May have a cracked head on an ec3 diesel engine. Mixed info out there on repairs. Looking for insight and recommendations on repair. Seems spray welding has good press but called the machine shop and they said no good. maybe stitching? New head is 2000...

Need some engine parts for the izeki e3cdt engine. Head gasket and maybe head. Anywhere else other than the dealer to get these parts? this engine only used in massey tractors? How is the current method of repairing cracked heads, i here spray weld is the best way. Not sure of the cost...

Need to load tires, a couple years ago washer fluid was a 1.00 a gallon, now just shy of 2. Anyplace sell bulk, or any suggestions for ballast. temps near 0 sometimes, so can't freeze.

I am going to make my own tractor chains. Will get chain from harbor freight, but when looking for other parts I can't find a good supplier, things like cross hooks and side chain fasteners.

Looking for a used compact tractor, prefer JD or Kubota. Looking for 40hp-50hp, with a factory cab and loader 4wd hydro. rochester NY area will travel. Been a couple of good deals, but work during the day gone by night. So any good deals you may run across would appreciate knowing about them

Looking for a used compact tractor, prefer JD or Kubota. Looking for 40hp-50hp, with a factory cab and loader 4wd hydro. rochester NY area but will travel. Been a couple of good deals, but work during the day gone by night. So any good deals you may run across would appreciate knowing about them

looking for a LH step assembly for a 1540/mt275b tractor pn 6241858m92 used cant afford new. any scarp yards you recommend trying?

Looking for some tin for massey 1540 or challenger mt275 (same tractor). Need floor tin, fenders, seat pan. Can't afford new parts. any sites, or dismantles that might have this?

I have a Curtis cab that I need to remove an intact piece of plexiglass. It's surrounded by a rubber gasket. Can't seem to find anything on the internet when it comes to a piece of intact glass. They want $75 to remove a 10 by 15 inch piece so I'm going to try to find a way to do it myself any...

Anyone know the battery size CCA for a JD 870? Also how do you do a search with two words on this site?

Been looking for wheel weights for a 1540 tractor. Can't seem to find any. Are there weights from older tractors that will fit? May make my own if needed

Going to add a precharged antifreeze with sca for cavitation. Looking at fleet fcab53, the most cost effective solution. Looked through the forums and most threads are old. So thought i would ask for recommendations.

Is the massey 1540 engine a wet sleeve? no reason to add sca additive if i don't have to. Is the model of the engine this:- Iseki E3CDT

Have this 1540 that I have been trying to put back together for the last 2 weeks. Dealer will want 500-700 to get it together, that is just put bell housing to transmission and a couple of bolts. Have split tractors before, not a double spline one. So if you have any good tips or tricks let me...

Split a massey 1540 to repair transmission plug. Now tryp to put back together. everything is level, even. rotated flywheel to align splines. Not sure whats hitting, the pilot shaft and hole or the splines. I get it to go so it almost meets the top studs, about 1.5 inches but won't go...

update, have a Massey 1540 power shuttle. bell housing was full of hydraulic fluid. I empty the fluid. Started the tractor, clutch depress, out of gear, neutral on shuttle. Fluid started coming out. shut off the engine fluid stopped. So its not the output shaft seal. But something to do with...

Massey 1540 Power shuttle 07. I have found the bell housing is filled with hydraulic fluid from the transmission. There is only 1 shaft coming through the transmission case to the bell housing. I do not think the seal is the cause. But suspect a crack in the trans case. Don't know how that...

Ok just bought the massey 1540 factory service manual from argo, that was a waste. I have a power shuttle issue and it has 2 pages which are just illustrations, nothing about the solenoids etc. Was wondering if anyone here has worked on this tractor, and can help with the power shuttle. I...

If anyone here has access to a Massey Factory service manual, I would like to know if its detailed with pics. I purchased a service manual, with good information but no deatail on procedures like power shuttle removal. and with the cost of 299.00 I don't want to buy before i know its good. Thanks

massey 1540 with power shuttle is leaking fluid from the transmission vent tube. Tractor operates fine, maybe a little slower on the shuttle. Not sure what would cause this. maybe a crack in the casting???

Looking for a hydraulic filter for a massey 1540 with powershuttle. The one on there now is not a massey, has numbers on the top of 1643 (20), measures aprox 7.5-8" height and about 4.25 diameter, dark blue can. the 1861 napa-wix51861-bt388 does not fit, to big A 6241072m1 seems about right...

Have a Massey 1540, 2007, powershuttle. After plowing in 2 degree weather i notice a hydraulic leak. Its coming from the transmission vent tube on top of the bell housing. I noticed when the tractor is turned off i here some gurgling from the tube and the leak stops. This will happen when...

ok massey 1540 power-shuttle, 2007. was 1 degree out had to plow. warmed up the tractor and then discovered fluid coming from the transmission breather tube. tractor move fine but leaks fluid. Warmed up the machine (external heater) thinking it might be ice blockage in a transmission port but...

Have a 1540 massey 2007 with power shuttle. I can start the engine, it will idle but will not accelerate. Little more black smoke than typical. did this last time I used it and with time rpms came back. I am running winter fuel with antigen additive. Check air cleaner, looks ok. now what?

There is a hydraulic leak on the pipe coming out of the filter assembly and going forward to engine. I see there is a rubber hose connecting the two pipes but that connection is ok. the problem is I have the loader brackets and skid plate blocking my view and cannot determine where the leak is...

Have an older McCullough 610 chainsaw, I need a new 18" bar. Does Oregon make one for this saw? thought this would be easy but have yet to find one online.

Would like to add a remote to a massey 1540 tractor. Cannot afford the 2k the dealer wants. If I could get a picture of where the ports are I could figure the rest.

Block heater is bad on my 1540, its tucked way back. can anyone tell me what size it is? any recommendations on replacement? Any tips on replacing it, should it pull right out?

But this tractor used with front snowblower,. put frame on and it appears the the shaft the connects the mid pto is a little short. I must be doing something wrong because this setup was working. Not sure if I am missing a small extension piece or what. Have no manual. I would say the shaft...

Seal is leaking from the shaft on the gear box. the seal is 80 40 10, cant seem to find one online. Also I have read from past posts that putting grease in the gear box is one way to fix the leak, but they didn't say what kind of grease. Also whats the best grease to use on the spindle...

My massey 1540 smokes even under light load and I think its uses more fuel than it should. is there an adjustment for this so the turbo does not move the rack as quick

Can't seem to find anyplace thatsells 28x8.5x15 tractor turf tires. they tell me thats an old size. check other websites no luck. do they still make these?

have a cat mt275b which is the same as massey 1540. Have a loader valve problem, very little control. when I lower the bucket it drops like a stone, all my other loaders drop with some control and slower. The valve from massey is1500. may try and repair but is there any second source for partss?

I need new front tractor tires, I have turf tires on the rear. I was thinking about putting on ag tires for the front for better traction in the winter. Don't see ant down side

Well this was my 1st compact tractor, have a 1540. needed a couple of parts, a loader joystick valve and a piece of sheet metal. The loader valve is 1500, and the sheet metal is 619. Joystick valve on ebay is 300 just not for this tractor. just for comparison I called a kubota dealer asked for...

Don't have an owners manual, was trying to remove the loader off the 1540. The loader came off fine, but I could not remover the hydraulic lines. I assume the collar slides back and you remove the hose. None of the collars would push back, and there is no pressure on the hoses. So bad couplers...

The loader valve on the 1540 sticks and has other issues. Was this valve made specific for this tractor? I priced the remote kit and it is 2000.00, I can only assume the loader valve is close to 1000, should be closer to 400. any good used part suppliers > thanks

Recently got a massey 1540 tractor with loader. I had some dirt in the loader bucket, maybe a little more on the left side. lifted the bucket and the tractor almost tipped over. very surprised and somewhat disappointed. I normally run full size excavation equipment, backhoe/skidsteer. this is...

Looking for cheap owners manual for newly purchased used 2007 1540. Any help would be appreciated. Also would like to add remote valve

I thought this would be easier, looking for a loader for an l4330 tractor. should take an la853 or a bh2346. waiting for quote from bushhog. any place sell used loaders? or other sites that might sell a loader for this machine?

I have a 15k flatbed equipment trailer, would like to add a dump on to it. My plan is to build a dump insert that I could lift with a backhoe and drop it into the pockets of the equipment trailer. The trailer can carry 13k figure with the insert I could carry 11k material. almost 4 yards of...

Looking at a used tc40 with a fel with std transmission 4x4. I would like to know what the loader can lift? and what are the weak points of the machine? what breaks the most. thanks