Search results

I have 5103 with 512 loader. It has rear remote and forks and bucket. 1670 hours and just had it serviced by JD DEALER. I saw 2 similar to mine without forks and rear remote for $18,900 on tractor house. I priced mine at $16,900. With pictures showing everything. I thought this is reasonable...

JD 50 HP TRACTOR WITH LOADER. LOW HOURS 1670 JUST SERVICED NEEDS NOTHING REAR REMOTE. HAS ALWAY BEEN KEPT IN BARN. 5103. Bucket and Folks. Tires a loaded. 2WD $16,000. excellent shape one owner and has been serviced by JD dealer Cell 518 488 8489

My barn was put up during a snow storm and when they moved the trusses with rented machine they left 1 1/2 to 2 foot ruts. It could not be helped and now ground hard finally and grass has grown up. It is almost impossible to even brush hog. I managed to back blade with bucket near barn but I...

I have 25 acres that has been allow to grow from pasture a brush lot for about 30 years. Not adult enough to timber and want shade trees a brush hog really struggles and I do not want a dozer to come in and make more of mess. What I see the forestry mulcher would do the job. I am not going to...

Looking to purchase a propane stove for alternate heat who makes the biggest BTU stove? Napoléon,, PE, Jotul, Vermont casting, Lopi, Regency. Please feel free to mention one that is not on list. I am looking for direct vent. I would like one that is colored not just cast iron. Would like...

Is there any place to get free blueprints for a pole barn 40 by 48?

I have a 30 by 40 and it is attached to a 48 by 90 pole barn, there is a wall at 28 feet and there is a 20 foot overhang on 48 by 90 part, this barn is 8 foot at the eaves. The entire barn has a metal ceiling inside which I wish to take it down and move also. The new Barn I wish to be 30 by 48...

We just finished changing the drive belt on my 2009 drive belt on 4010 trans mule. I had everything ready and two of my friends came and did it. IT took maybe an hour. We took off the metal cover and the plastic cover removing about 8 or 9 screws a few hoses pulled the belt out which was in...

I have a trap thrower and would like to plug it into an outlet as I can shoot right outside my barn I have plenty of outdoor plugs. Making sure the deep cycle battery is charged is a pain for me. Is there any way to adapt this to a regular 110 house outlet? I have a white wing which I am not...

I have some really neat hunting shots I thought you guys would enjoy. I had fishery and wildlife students come out to do a project on the game preserve and one of them played camera man. The 4 boys helped me with the birds and I really enjoy the kids and I had three hunters they were very glade...

Hi Guys I have sprayed with round up and that has helped some. I have trimmed and my week wacker at least 100 hours a year on it. Well It is getting harder to spray as when there is no wind it rains. When there is no rain the wind blows. The bottom line is...

Hi Guys I have been spraying around the farm and used at least 80 gallons of grounds works from TSC I bought last year. I used so much as I do it around my pheasants pens, ditches that protect my driveway, steep banks, around trees and side walks so the grass will not grow in my parking area...

Hi guys For those of you that do not know me I am NOT a stranger to projects Here is the thread when I built my place http://www.tractorbynet.com/forums/projects/208933-project-started-2004-end-who.html Part of plan is to sell and get enough money for some of my retirement money. But this...

I can not find the air filter number for my 4010 trans Gas 2009. Can someone tell me a napa or advanced auto part number

Hi Guys I have written posts about building my pheasants pens below are some pictures of the three pheasants pens I have. I have aways been able to recatch the bird the hunters missed once the hunts are finished. But never the way I wanted to. This year alone when I have guided I had donated a...

We dug up around the ponds a little today the muskrats had undermined my banks so bad. In some places the banks were collapsed back in some cases 3 and 4 feet. IT was so bad I was afraid to train the dogs on that side as there were holes all over the place. I did not dare get the mower close...

Saturday night went over a friends house for fresh mallard, Teal, Wooduck cooked out on the grill. Duck season opened in NY and the boys did well. I am not sure what Craig used as marinade but he coooked on the grill and it was excellent. I had Teal (my Favorite) and Mallard. I would compare the...

Hi I would like to hear from anyone with an offset fail mower I am so sick of weed wacking I could do a commerical for stiel for their weed wackers it averages out to about 60 to 100 hours a year. I want something I do around the pond edges and the ditches with. And I need it to cut way...

Hey fellows I want to call our attention to a post I put in pricing and give me your thoughts. I am not sure this will work but I put the URL in this post to that one. Eddie you have done a lot of stuff with equipment Farm with Junk your are MF expert...

Hi Guys I have been thinking about a second tractor and a year ago a friend of mine bought this tractor in show room condition with the promise from someone who was going to let him groom land for rabbit hunting with his hawk and after my friend bought the tractor the guy told him no. So...

Hi Guys I am servicing my mule 2009 gas mule trans 4010 335 hours. I know what filter for oil fram #4967 1.3 or 1.4 oil I believe it is 10W to 40W Change air filter Grease the one fitting replacing the spark plugs question...

Hi Guys I know this off topic for this forum, but this is a big collection of people with pickup trucks that know what they are doing. I just picked up a GMC 2007 HD2500 gas pickup (Automatic Trans). I had friends take me out to albany to get truck and they did not want to leave until we...

Hi Guys I have a 2010 mule 4010 crew cab and love it. And just recently sold me JD gator 4 X6 But I would like to get a newer machine to replace the gator. Did not have EFI and would of been harder to have a cab and it was 8 years. I would like a single bench seat to go places that my 4010...

I am remodeling the grooming shop in my kennel into an apartment. The kitchen is going to be small and here are the cabinets I am looking at what do people think of prices? This site has free shipping Shop Beautiful, Solid Wood Cabinets at Kitchen Cabinet Depot: Kitchen Cabinet Depot...

I was out to dinner the other night and someone claimed to have taken this picture of a MT lion off their trailer camera and showed it to me. They said it was taken in Albany county NY. The property is very hilly and MTs he owns a couple hundred acres up there. I guess I was wondering why if...

I have had a gator ever since I moved to my land and bought it in 2004. It now has 330 hours on with hydro dump bed, brush guard, bed liner. The seats are a little rough, but other than that it is in good shape and always maintained. I want to trade that in on a new gator not sure what model I...

I have been looking at log splitters for the second year I borrowed some ones but I hate to do that. His old and will split anything but it is borrowed and I hate to borrow stuff. I have been looking at log splitter and boy there are some real differences I know timberwolf makes a good but I do...

Hi Guys When I had the propane tank put in for my radiant heat I had them run a line to my office. I only keep the heat on about 50 in barn and very often work out there and would love to have a propane ventless stove out there. I only plan on running the thing for not even an hour at a time...

Dealer has this tractor $4900 for MF 1020 it is supposed to be 4wd. What do you think for price?

Does this sound like a good price Massy Harris, 7', hyd lift, tow-behind mount, $650 I like it for cutting around ponds.

Hi Guys I am still amazed at what zero turns go for. I mow a lot of grass and decided it was time to swap in and up. I went from Z425 with 48inch deck 23hp(I think). to a Z665 with 27HP and 60 inch 9 guage deck. I swapped my old 2008 Z425 and will have to make up the difference on Z665 which...

International 424 6ft. finish mower, three point hitch, no power steering, excellent condition. What does everyone think of price on this tractor for $4800?

I used my zero turn three times this year and for the second time after adding gas after a 4 hours of mow time it ran, went 15 feet and stopped, it would not start. My neighbor who does work for me came up made sure there was gas getting to engine, then took carb off took it home and freed it...

I used my zero turn three times this year and for the second time after adding gas after a 4 hour mow time it ran, went 15 feet and stopped, it would not start. My neighbor who does work for me came up made sure there was gas getting to carb, then took carb off took it home and freed it...

I want to knotch or a better word is burrough out a hole in a 4 X4 but in the center and it will be a circle what is the tool an electrician using when drilling thru 2 X 4 wall studs. The only thing is I only want to go 1 inch deep in the 4x 4. I love to use air tools they are so powerfully...

Hi Guys My gator needs new front tires the olds ones are rotten. I called JD and they wanted $94 per tires. I will not pay that. I called a few places in cobleskill and they were a few dollars cheaper, but again I will not pay that kind of money for one tire. The cheapest I have found them on...

Hi Guys This is not my project, it is a friend of mine the guy who owns the falcons. He took down this pigeon loft from a neighbor had a brought it home. He gave the guy $100 and of course it is not until you get into everything that you find out you can use this and use that, but can use...

I had some rodent and other issues with bird this past year so I am going to do stuff a little different. I am going to use more portable pens and not as big. When you brood birds you can only have 1 age group in with each they will pick on each other if you try and do 2 different age groups...

What does it cost for concrete today to do a floating slap say 30 X 50. NY

Hi Guys Was curious about something. Got a job that I have to travel and started this past week. I left my house at 5:00am on Thursday had been burning my wood stove all night and the wind howled Wednesday night bad when I went outside it is was 13 degrees but the wind had died down. Before...

Hi Guys I have decided once I get the money I will have a propane backup generator but in. I have an electric stove which came with my house and this summer will take my electric from house and install in my kennel. I have normally always had gas and like it more. This will free up some room on...

Hi guys I was so excited about this I wanted to share it with you. I was called about 10 days ago by Kevin Hoyt to shoot a pheasant hunt at my preserve. I did a little research about Kevin and what he is about. The show should air in August of next year on Versus channel. (NBC) Kevin Hoyt's...

I have a snowmobile trail that runs through my property and it crosses the creek down in a gorge. Last year or the year before my neighbor who maintains the trails built a cement block wall and had the bridge about 10 feet in the air. Lasted two years until Irene hit this year and the water took...

Hi Guys As per my other post about the wood stove (which I need to update with pictures). Stove is in the but not hooked up yet. I have 5 cord of wood cut and split and about 4 cord is on my deck. I have some smaller logs that I wish to cut up that I have brought up from the back and wood...

Hi Guys I am getting into duck hunting on my property this year and was thinking of building a ground blind that is mainly for duck hunting but could be moved with the folks of tractor for turkey or deer in the back. I found some plans and like them. Please do not tell me to go to walmart and...

Hi Guys I have been asked by many of my friends to document this project and finally decided to start that today. Please be patient, with me as this will take a lot of posts but I hope you all think it will be worth it in the end. I have always wanted to own a piece of land I could train my...

Hi Guys Have been raising my baby ducks in the barn and now moved them out side trying to get them acclimated to the outside and weather. I was going to make a pvc moveable pen and I thought why bother I will use a dog kennel and place a top on it. I 2X4 on the inside the kennel tie a rope to...

what do you call this type of hinge?

I have a mule 4010 we just serviced it changed oil and transmission fuel. I have used for about 10 hours and the light DFI is on solid. The power steering light blinks on and off. I also noticed a lack of power when I drove it. Did not see light when I first ook off went about 30 feet and saw it...

I thought this was kind of assuming so I thought I would post it. I was talking to someone the other day and I said I had spread 160 gallons of week killer around. They said to me, "oh your gardener is round up". I really like to keep my place nice and I absolutlely hate tall grass after I have...

I was curious what people thought, I have my MF 165 for sale on Ebay MF 165 Diesel Tractor with Load hours 1843 57 PTO | eBay After looking at the prices in want ad digest, I priced mine at buy now $8300, started it at $7380. What do you guys think of price?

I have a pen for my ducks but need to expand it so they can get on grass, The pen has a roof over it and cement along with a little pool area for the birds. But it is pain to keep clean and would like them on the grass in an area that we dug a little mud hole pond. The first year I did this I...

Can anybody answer this question 1) oil filter for mule 4010 gas 2009 2) Can I use JD gater transmission for transmission fluid on my 4010 gas mule. I know mule takes SAE 90. Not sure what JD gator transmission fluid is? I know the JD oil has good specs. Thank you...

I was thinking about doing some free range chickens and turkey but they will not completly free range but more of move the pen every day. Have tractor to move it with, needs to house maybe 20 turkeys and 30 chickens seperate but different pens.

Hi Guys I had a lot of action about my post of reducing heating costs by wood stove another thing I am going to do is insultate my cement block crawl space in the spring or this summer. Crawl space is 4 blocks high. The house it self is r22 on floors, r21 on walls and R44 in ceiling. If I...

Hi Guys A friend of mine just bought a MF 230 that had just had new engine put in here are the facts as he bought it today. Description from web site Super nice orig tractor. Just installed new 3 cyl Perkins Eng. Brand New-Not rebuilt Original owner left oil plug loose. Year 1979...

MERRY CHRISTMAS I have been thinking about a wood stove more and more lately. I recently had an event at my place we cut wood for an campfire to keep eveybody warm and it only took about 3 hours to get almost a cord of wood out cut up in 4 foot lengths for fire. I really never wanted a wood...

I parked my 5103 JD the other day and now I can not shift it out of Park There is a whole in the boot of the bottom of the shifter. I took boot off and can feel a spring which gives when I push down on it. Could it be possible for water to get in the boot and freeze something in place on the...

Hi Everyone I was looking at hunting blinds on the internet and was thinking of building one. Then I thought about all you do it yourself guys and thought ok I bet somebody has built some really good hunting blinds and maybe they would share a picture of it? I am thinking of expending the...

I am sure some body on this forum has bent so pipe for green house hoops looks like you guys have done everything in the world else. I think the pipe my other hoops are made from a fence pipe for chain link. the guys I bought the orginal hoops charged too much and I think I can get the job...

Hi everyone I bought a cubcadet mower about 5 years ago mod number 13ap11cp709 serial # 1b016H20094 I went to tractor supply and they told me $415, The guy repairing my mower said he could cut me a break and order it for $315 maybe. Is there any place to get the PTO clutch any cheaper or...

Hi Guys IS there a web site for blue prints. I am going to call our local school and talk to the teacher about building my club house, but I assume he is going to ask for blue prints. Is there a web site that I can go to that you can put in the height and what you want on center? Whent they...

Hi Guys The game preserve is going very well and I am thinking of building a club house for my hunters after hunts. No lodging just a place to eat, warm up and talk. Will have electric, water in summer, setup will kind of be like a lodge a little kitchen with some cabinets sink, ref. 4 or 5...

Hi Guys jusy brought home my new trans 4x4 mule. I am curious where everybody gets the roof an windshield? I have seen some plastic tops for about $500 or so has anybody found them cheaper? Will post a pic tomorrow. The game preserve is doing ok I have sold as many birds in the month of OCt...

Hi guys Has anybody dealt with a dealer in NY Kawasaki. If somebody had bought a mule from a dealer in NY they are please with I would not mind traveling if they got a good deal. I am 30 minutes west of Albany ny. I am planning on getting a gas crew cab mule. Thank you for any input. Michelle...

I used a tractor and chain today and old box spring and dragged it around the pond edge today, it took some weeds, but need to have some one the other side of pond to drag back and forth to get the place they are thick. But I think it will work well already got alot of the weeds. placed the...

Hi Guys I would kill to find someone in NY state who could restore my MF 165. I love that tractor but due to age sometimes things break and it is down for weeks and I miss it when I do not have it. But it is not as much an issue since I bought a second tractor. But would love to have it look...

I have been looking for a sickle bar mower for almost 1 1/2 years. Most everything I have seen is junk. I am seriously considering buying a new one, I am afraid to ask this question has anybody priced one I want this to mow around my ponds and ditches and along the road. thank you Michelle...

Hi I have been reading a great deal about all the threads with the Markshams welding LD grapple rake and finally decided to take the plunge. It should ship some time next week had extra tines installed 4 inches apart and order 48 inch. I am installing on JD 5103, I also ordered the adapter...

Hi Guys I just got everything serviced and my MF 165 started to leak some oil from the filter. I tighten the nut and man it really leaked then. I was going to replace the old filter. IT is the kind that has a metal casing and there is a screw threw the center. I found a site that will sell me...

Well here are a few pics of my new chukar and quail pen. It is based on 8ft 2 X4. 1) Design something easy to build. Materials used all wood PT For 8 x8 section pens 6@ 20 ｽ inch 2 X 4 12@ 24 inche 45 % ends 10@ 8 X 2 X 4 1@ 8 X 2 X 6 aaaframea.jpg is a picture of the frame. The floor of...

I need to service my old suzuki king quad, the quad is at least 10 years old, if not older I do not know if it makes any difference. What weight oil does it take? and are there any filters? What needs to be done to service a quad? I serviced lawn mowers and my gator. But not sure about this...

Hi Guys Does anybody have a late model cub cadet tank commerical zero turn? There is an auction tomorrow and I am going to take a look at some of the equipment tonight before auction. I have a JD zero turn now and I find sometimes I can mow faster with then I can my 7 foot finishing mower and...

Cat 110B 1989, 3200hrs, new fuel system & mtr mounts, very tight, runs strong for sale in my area for $17,500 how good a deal does this seem? the ad says nothing about UC, but from the pictuer all glass is still in and machine does not look bad. Just curious what other people think about price...

I went to a pheasant preserve the other day and they had 6 mules crew cab , 2 gators, a ranger. So of course I asked the obvious question which one he liked the best and he answered mule, I went home and looked at the prices and decide maybe I might like the mule better also. I have a 6 wheel...

I remember reading a post on day that pointed me to a web site that allow you to design a pole barn or shed does anybody remember what site this is? thank you Michelle

I remember somebody posting something one time that they designed or laid out their shed with a web site and it showed the posts and things can anybody point me to the web site? thank you Michelle

I can get a EZtrak Z425, 54-inch Deck for $3800 out the door what does everybody think of the price?

I have a JD 5103 and have a set of forks along with a bucket and I am amazed how often I use the forks. Most of the time around the place it is at least 3 or 4 times a week. I am thinking of getting a rock bucket many stones to pick and some stonewall fences that are no to deep and high I...

I am in the process of building a pheasant pen rather like a pole barn construction. It is 16 feet wide and 70 feet long. The top will be bird netting held in place by green house hoops. 5 foot on center. The 4 x4 are PT and are 10 feet on center or as close as we could get them the post hole...

Hi Everyone I just bought a 5103 this summer with a front end loader and I love it. But I borrowed my neighbors tractor this weekend as I was cutting some trees in log lengths and the forks are a great way to handle the logs, either to move or just stick a fork under them so they are easy to...

I was wondering what everone thought of this excavator it is JD 690C the under carriage is about 60%. Does not seem to have any leaks and they want $13,900 for it. Does not smke when you start it up. I am not sure how much the machine weights I would say it was made about 1988 or so. The guy at...