Search results

thank you

I have a x739 just getting out of warranty with the 60 inch deck. Never noticed it before but at full throttle the tach is showing 2 bars under full rpm. This is if it is just parked or driving, mower engaged or not, and if cutting or not. Is this normal for other machines?

The original pump went 2k hours. All the problems came after the repower from small engine warehouse. I had the conversion done at a very good dealer that was almost an hour away from the house. Within 20 hours of the repower it started eating pumps. 2 trips to the dealer and he was stumped...

I have a later model that has a more angular bucket vs the round style on earlier units. I really want to take the bucket off and rig up the ssqd and use the forks. Solving loader bucket issue is very secondary. I do a lot of mulch and am casually looking for a larger capacity loader bucket...

Fuel Gauge is reading correctly. I stopped going through fuel pumps for almost 4 years after replacing the fuel pickup assembly. When it was going through fuel pumps they always worked fine and then were dead. The new issue is the fuel pump will quit when using it, or be fine when shut...

The first pump lasted almost 2000 hours in the tank, then I went through about 4 of them and several trips to the dealer before I spent 180 on a new sending unit. I have no reason to believe that switching to an inline pump would solve my issue. This is a gas engine.

I have a Terramite T5 TLB that I want to connect to SSQD. I have the plate from Titan. The Terramite has one 1 cylinder for the bucket tilt and I want to convert to a more conventional 2 cylinder tilt setup. I know the conventional way is to cut/grind off the mounts from the current loader...

I had a shop repower my 425 several years ago with a Kit from the place in Indiana, I was less than impressed with the kit but thats another story. Shortly after the repower it started eating fuel pumps and I ended up finding a equivalent Artec E11000 at a fraction of the deere price and went...

I bought a T5 showing 400hrs It started life as a Sunbelt rental in Michigan and I bought it from the second owner. He said he used it very few hours, turns out the hour meter was broken when I bought it so who knows. The machine doesn't leak but it whines a lot more than any other machine I...

Hi I have a T5 Terramite and I want to be able to use forks and other attachments on it. For the non Terramite guys the T5 weighs about 3600,bs has a 4ft bucket and is rated to lift about 1700lbs. I have read a bit about people welding on Skid Quick attach plates to their arms and buckets on...

I dragged home a set of 35x12.50-15 tires with 12 inch rims from a truck being scrapped out. They have 4 inches backspacing which gives them plenty of clearance from the outriggers and the 35's which are closer to 34 just fit in the fenders. All this additional width brought me out to 62...

I have a ex Sunbelt rental T5. The stock 9.50-16 tires are destroying my yard, I need a more turf friendly tire.. From what I have been able to find out the factory offered an optional 31x15.5-15 which is at least 2 inches shorter than the 9.50-16 which is advertised as 33.3. After looking...