Search results

I never removed a wheel that big, your saying to keep it on the ground, removed the bolt. then jack the tractor. then from there what do I do? I did not look how is the wheel bolted, is it stud like a regular car or like a volkswagen where the stud screw into the hub? If it screw into the hub...

Found my issue. The control valve for the hydraulic top link was bearly engage and all the hydraulic flow was going there. It also 1/2 seize , I did put some PB Blaster on it and now it's moving and I have to wigle it to get to the Neutral. Then the 3pth work. To do a good job I would need to...

i apologize, French guys trying to speak English.

I was missing around 4 to 5 litre of oil. There is no leak that I can see. The oil was change last summer and I know it was levelled to the deep stick. Last fall, I was using a forestry Hydraulics winch for the first time. It's very possible that my oil went in there or the winch had a leak at...

I fixed the issue. I removed the drive shaft cover and there was a Snap ring that was disconnected. I clean and lube everything and did put the Snap ring back in place. The issue was resolved. the drive shaft was disconnected...

They other day I notice that my Hydrolic oil level was below the dipstick. The oil as around 100Hours with new fitler. Not sure why it was low. so i added oil. I ran the tractor for about 2hours and last time I parked it the 3pth was acting weird. It would take time to raise. I played with the B...

I'll keep and eye open and take a look to ensure evrything is alligned I never noticed any abnormal noise other then the fact that I had no more 4x4. Tractor has arond 1500hours. I had it for a full year so far and I did put arond 75hours on it sience. You say it's posble to hadf extract...

On my phone the link does not work. I'll try it on my computer when I get back from cotage. I'll inspect those axel bolt. Assuming it's pready obvius when looking at the tractor. Any idea what TQ they should be at?

I'll take a look at the front axel bolt. I have dissamble the drive shaft tonight. One snap ring was disangage en bended. The bolt that hold the drive shaft casing was also damage. I could see that previus owner had issue with that. I was eable to put evrything back togeter and with the sleeve...

Sorry, i dont understand how can this help finding the problem. When ingage i know that i have no traction in the front. The shifter switch from 4x4 to 2x4 no problem. I'm told to look at the drive shaft first. It could be broken and strip. The shaft is cover by a sleave like a PTO shaft. I...

I see now that it's a sleave. One bolt to losen and there are 2 sleave that retract with palet on them. Assuming they need to be turn to be release? Any one as a diagram? I'm visual and love to have procedure and diagram.

I notice that I do not have 4x4 anymore on my Mf1528. I'm told to remouve the driveshaft cover to inspect the drive shaft. Anyone has a diagram of the bolt that need to be remouve?

Hmm where did you get your repair manual? The 4x4 on my MF1528 does not engage anymore. It would be great to have the repair manuel. I'm told to cheque the drive shaft and I need to remouve the cover.

Ihad in mind on gething a hydrolic top link and i'll see how that perform and might get the tilt Cylinder later. how many shank you had on your box? I found a 5 foot with 4 shank. The box seam a light. but I had in mind to maybe had some weight. the good box are almost twice the price..... Got...

It's what I had in mind as well. 60" is probably my best bet. the tractor might have issue pulling the 66" and on easier materiel the 6" will not save me that much time.

I would only use it to pull snow away. and I do not have long to do. I agree that a blade would probably work bether for Snow clearing but I can't afford both and I think the Box blade is a better attachment for my need. I have never used a blade... but for Road repair or driveway repair I think...

Good Day Evryone, I have a MF1528. here are tractor data spec: Massey Ferguson 1528 Tires Industrial front: 25x8.50-14 Industrial rear: 12.50/80-18 Dimensions Wheelbase: 65.6 inches |166 cm Length: 112.4 inches |285 cm Width: 53.5 inches |135 cm Height: 80.7 inches |204 cm...

Thanks for the Tip. IN the past I used round up before disking with and pull behind ATV disc. The issue is that it's hard on ATV and Round up cost is expensive now days plus it's a chamical that I'd prefer avoid if I can.

I found a guys who has a MF1526 and he is running a 55" tiler. not sure what HP power it's rated for. He told me that his tractor could probably take a bigger tiller. He normaly do 2 pass the first time he create a garden. First passe then wait 1 week and do it aigain to let evrything die. he...

sorry not to sure I understand what you are trying to say.

I have and MF1528 HP motor:28.4 PTO motor:22.3 My front loader bucket is 60" Here are the spec sheet for the tiller: https://oxfordmachinery.ca/link#113b27f0-c22c-4279-b9ec-58f26eb9801e My dealer is telling me that the TM150 would work with my tractor. I told him I wanted a tiller that would...

I never tought of Looking if there was a 3pth section in the tractor manual. I just looked and it is indeem in there. I'll take the time to read it. It look like they need to be attach at all time.

I have and MF1528 an I removed my Backhoe today for the first time. Any one know what are those link for? Picture 2 and 3. that is attache to my 3pth with tie wrap when the backhoe was attache to the tractor. picture 1 is a link that is on my backhoe subframe. I'm assuming that need to stay on...

As anyone has a video on how to disconect this beast? I just received the owner manuel for my backhoe the procedure to disconect is verry confusing. The previus owner told me there is a 3pth included with the tractor and I'm interested to find out if there are missing parts.

OK I think I found the issue. the vibration made the fuel filter to louse it self. I did tight it almost 1.5 turn. The bold is place in a place that make it not so easy to acess. there is a bar in front of it. Wondering if there aould be a tool to help unscrew or tight this for the future.

it's a MF1528

good idea for the cartboard... did not think of that thanks

not sure I understand what you mean? I'm suspecting that it's only leaking to 1/2 tank but I'm not 100% sure.

I'm 100% it's diseal the cool is full and hydro oil as well

I do not have any record of maintenance. I have change the oil and fuel filter already. I'm pretty sure it's fuel on the ground. If I had mess up the fuel filter installation the tank would have empty out? it look like the tank might leak? I'm not event sure if the fuel gauge is working...

Good Day Everyone, I bought a used tractor couple of months ago. When I bought it the previous owner told me that nothing was leaking and where it was parked there where no signed of lequid on the ground. the tank was at 1/2 at the time. I bought it home used it a litel, and I changed the fuel...

Tanks I'll try to check out a local welding shop. I have to stop at my MF dealer this week I'll asked if they ever had custumer with the same issue as I do.

I fixed it. kind a feel stupid the the fitting was lose... I used a wrench and turn it about 2.5 turn. I played with it for about 2 min and it look like it does not leak anymore. I would not be supprized tha the leak come back. I'll keep and eye open and if it does I'll dissemble it

What si the name of those pliar? i'm in canada. would be easier to try to find them in a local shop

I have tried that... no luck

Interesting, I'll see if I can find those kind a pliyer.

Sound good I did not know there was a O ring in there. Are hydrolic O ring any different then other O ring? I have a local shop that sale Bearing and O ring. They should be able to match it. Just want a make sure the material type. if it's important.

It's coming from the 90% elbow. See picture 113044. So there is a O ring there tha tneed to be replace?

I had a closer look and they are definitively Safeway S40 https://www.safewayhyd.com/products/s40-series/ So a geust I have to find a way to get the collar sniping.

@ lpakiz These are in fact verry interesting.I don't think it's the same type as mine. But I'll try. I'll take picture on the name and number on them tomorow.

Thanks for the tip. i did'nt not tought about that. Mine is a 2008 and the previus oner told me he had to change some hose because he broken them but I do not know witch one.

Thanks good idea I'll do that

I bought a used tractor this years. It's a 2008 MF1528 TLB The things sat outside all it's life. I bought it because I got a good price and I figured I'd have some repair to do. I never really had to mess arond in hydrolic so I'm a complete what ever you want a called me :) Here are some...

yesterday I unscrew one of the hydrolic line. I was left with the Elbow,Coupler femele and male. I was eable to rotate the Elbow,and femele Coupler. I have tap,pry put oil and evrything I could think of. Then I try with somone else To grip on the Elbow and and collar to try to have only the...

No worry I will not cut them yet. If I cut them i'll make sure I buy the new parts before. It's winter here and I need something to plow. My polaris atv does not start and it's what I normaly use to plow. I have to fix this first. Got my self a new starter it's my weekend plan.. the dam things...

Dont worry about it, I don't have to answer that i think. I don't event understand why he is saying that. His advice was to out penetrating oil witch I had done before he mention it. I found the diagram on ACGO site but it still does not mention what kind of connector they are. It sound if I...

WOW Thanks guys for-the Help I figured it out!!! Dam I love forum.... After cleaning the valve. I realized that with the broken/welded Stick it was now touching the plastic. So I unscrews the Lever and I flipped it they other way. now Everything is working as it should! See 125902 before it was...

Your as a ring inside? mine is 4 ball.

I was eable to remouved the 4 bolt that hold it. I just don't want a break the plastic. I like things when they look factory... If I can't unclip those callar. I'll call the dealer for and estimate of the part to see what is cheaper. cutting the plastic or cutting the fitting. I might have to...

OK so I clean it this time before greasing it. The end cap was full of sand /dust. I can Now see there are 4 ball in there that should be holding the Other piece when it goes into float. I have try with only the spring grease it did not work. when I push the leave forward I can't feel if it's...

yesterday I made this video before gearing everything and putting it all back together.. i'll dissemable it aigain et this time I'll clean it bether and see if I can remouved some of the rust and regress evrything after and see if this fix it The tractor was not running at the time

It's what I think as well I'll have to replace the male and female.the bearing in there must be welded by rust. I'm still hopping to be able to disconnect them so that I could maybe only replace all 4 female. other wise I have to cut the plastic to access the Male to be able to screw them or...

I have unscreew one hose one one of them. so I was left with no presure at all and only the elbo the male and femele. They will not come out.. one things I notice is that the Collar does not spin freeley. it does spin arond the male commection but the Elbow spin at the same time as the Collar. I...

I have dissemble the valve. it had almost no geese in there. So I have grease it all and jingle the the stick to make it move. no luck it does not go into float... I'll have to dissemble the plastic and the couplers

I have soak them with break clean then I have been adding PB Blaster for the past 2 days without luck. i'l continue to add some PB blaster evry couple of hours. might go dows the street to my friend garage to try to spray compress air in all possible angle. that could maybe remouved some dust...

So you collar mouve up or down on yours. Sound they have sand or rust inside that prevent the collar from mouving.

So if I understand the Float valve is behind the control valve. I have to unscrew 1 and 2 and grease the spring?

I have tryed this.. I have have also try to tap the elbow connector with a mallet.

no luck... when I look at the collar from downward. I can see there are 2 ring in the collar. I try to pry the outerward ring. I can see there some kind of rust in there as well but i can't sray penetrating oil from under. I hadded some more penetrating oil on the top with luck it might go dow...

yeah I realized that afterwards and deleted my comment. by the look of it I have to pulldown the collar and pull the hose up but the collar don't move at all. I'll have to unscrew the hose I think but i don't want a do this yet. have to sort out a backup plan to plow first.

yeah.... the tractor is in a car shelter but it's cold...

Double post

canada/quebec/Cantley(Small town beside gatineau)

Does not work... it feel that I will break the lever if I pull harder in the down direction.

hmm that is something I did not try.. I'll give it a try. but when I pull back on the leaver the Loader go up. so you say if if was plug wrong if I continue to pull it might go into float? that would be dangerous trying to left something and then engaging float by mistake. I'll try to see if...

I have try that the loader lift the front of the tractor. and If I push harder it feel that I'm pushing aigain's a wall and the lever will break. I have to dissemble it to see how it look inside. I feel something is wrong.

I tought about that as well the guys did weld the pied on the top and it could prevent from punching forward but when I push it slowly it does not touch the plastic. I want a removed that plastic cover to have a better look at it. I just can' disconnect those stupid hose. Some have sugested to...

I tried to punch down on the elbow (1) and to push the collar up (2). event tried to pry it up with a flat screew driver. I'm limited on the amount of force I can apply with the screw driver has I'm puching aigaint a platic cover. so no luck. Look like I'll have to dissemble the Hose (3). Only...

So the collard need to be press up or down? When you guys say lose a hose witch hose should I be lousen? I uave try with chanellock plyer to rotate, to go up and to go down witout luck. I have one of the 4 conector that If I press down on the elbow while trying to raise the collard i can feel...

I have wigle the stick in all possible direction. I dont think there is presure in the hose anymore. As for the tab that might need to alligned. I do mot see any. I can't turn the collard or pressdown on them or up. I have tried to spay then with break clean, then penetrating oil. I'll make...

I figured I'd make a new thread other then my Float Thread. In my journey trying to disassemble my loader joystick. I can't disconnect my hydrolic. the collar will not slide up or down or turn. Any idea ? It's a 2008 and I don't think they have ever been disconnected before.

I have wiglet the stick in all possible direction multiple time. I believed there should not be any presure left. The collar do not slide down at all. I have try to put a flat screwdriver and to gently tap the collar down without luck. All 4 collar do not slide down. They also do not rotate. I...

Here is what it look like. Some how I can't disconnect the quick connect Couplers. I have triend to put penetring oil into them witout luck so far. Those have probably never been disconnected.... Any trick on how to disconnect those? I have to disconnected them in order to be able to pulled the...

I did not find that lock if there is one. the Manual also does not speak about it. @Tinhack I called the previus owner and he told me he never replace the valve and he did not know what Float was. He told me it hapen to him once. He had and accident wth the tractor and falled and try to hold on...

I'm new to this. the valve look like what? :) hahaha

I'll fool arond aigain with it but the feel that I have when I push foward is like I'm puching the lever into a wall and if I force more it will break the stick

here is what my manual sai

I tried but I'm scare to break it. might have to dissable it to go have a look at it. I see that previus owner had broke the leaver and welded it...

I just bought a massey Furgeson 1528 with a Front loader 1520 and I can't find the float position. The operator manual that I have is for 1515/1520 and mention to push the stick foward to reatch Float. It does not work and I'm wondering what I'm doing wrong or if it's hard to repair. Previews...

Thanks I'll check with the. I belived it's with them that my dealer had the intention to have one build. Not sure if they deals with non business

I still can't find the 1825... I'll have to try with the VIN.

I calles my dealer and they told me it's possible to get attachement for this system. only thing with covid it's a special order that can take a long time.

I could not figuer out how to log in as a geust. it's asking for a dealer log in....

This is a bumer. I was not expecting this answer. I'd like to get a snowpucher and some fork but I did not had the intention to spend 2k$ Canadien to concert my current bucket.. Previous owner did not treat the bucket well. It's bended and have hole in it. I'll have to heat it up with torches...

Is it possible to get attachment for this system? Can I take a regular attachment and run a pin on the top hold that it will connect?.

I recently acquired a MG 1528 TLB. The previous owner had the loader and tractor operating manual. I'm looking for the backhop Manuel and the repair manual of the tractor. Any idea where I can find those? Thanks