Search results

My father has a 2003 4341 and the hydraulic on the frontend loader broke -- one of the two that drives his bucket. He's 88 and needs this for winter. The machine shop said they could not fix it as it was bent and scared the cylinder too bad so I need a new one. Where do you find these parts?

My dad has a 2003 Zetor 4341 tractor and it uses a 4DLT battery. However, he is 88 and forgets to check the water so the battery goes dead so he wants a maintenance free battery to replace it. Any ideas of alternative batteries? He says its a tight fit. Here are the specs on the current...

I have about 13 acres of which 5 require mowing with some obstaclesand fairly flat. I致e been using a JDLA175 for the past 5 years and it has been breaking every month this summer Iam wearing it out. I need somethingstronger but the boss says I have a spending limit of $5,000 (which I can...

I have a 4 year old LA 175 and use it pretty heavy. The other day I was mowing for about 3 hours and when I was backing up the blades suddenly slow up and almost stopped. So I cooled it off and checked the blades and retried it and when I turned on the blades it sounded like a helicopter...

I need about 60 amps at my barn which is about 350 feet from the house panel. It must be buried and it will cross over my cable for the tv. I looked at running a new line from the street but they want $65 a month for the meter which is too high. I've received quotes and they are all over the...

I finally finished my barn & need to add power. My wife called the power company and they told her it would be better to run power from the house than get a new service and meter as I would have to pay a $60 a month meter charge. Pole building is about 450 feet from were the power comes into...

I need to get an oil filter for my TY395 ST 2002 bulldozer. Anyone know of a site?:confused:

A friend of mine is having problems with a skunk trying to build her next under his front purch slab. She is probably wanting to have her sping babies there. He keeps filling in the hole but she comes back and redigs it every night. Any ideas? He lives in town and the city will not capture...

After two years of thinking about it, I finally started my pole building. its 30 by 40 with an 8 foot door and a 10 foot door. Here are some pictures of the prep work and after the first day.

I have a 30 hp chinese dozer that was runing fine until a few weeks ago. What happened is that when I went to start it, note that it was left out in the rain for a week, it blew two fuses. So I replaced them, a number of tiems and it finally started. It did this for a week or so with me going...

My father has a 1998 zero turn 61 inch deck Snapper and I'm looking for a junk one to use parts from it fix a few things. Does anyone know of a good place for find old mower junk yards? the main part that is broke is the left transaxile.:confused:

I'd like to see pictures from the January & February 2010 snow storms on the east coast. :)

I have a question on order of activities. I have about 3+ acres of grass around my house and very bad ground so I added some top soil and seeded it about 2 or 3 years ago. Now, each year I aerate, put down grab grass control, fertilize, lime, and over seed in the spring and late fall and the...

I'm building a pole buidling in about two months and plan on running electricity to it before next winter. Would #10 wire be as good as I need and should I run two wires? Here is some more information: I plan on dropping in additional breaker in the house fuse box and connecting the pole...

Last year we discussed options for my project to build a pole building and based on the great input from you all, I stopped the project for a bit while I saved up some money. Now I have the funds and wife's approval. :D So my new plan is to start building in March and the size is now 24x40x10...

Question: Why does my rear blade keep breaking off the swivel? I have a 45 hp tractor pulling 5 foot swivel blade and every two years the weld breaks. Is it that I need a heavy duty blade, is my tractor too big for the blade, or is this just a fact of life? I grade some ditches, dirt paths and...

I'm starting to think about a having a pole building built for my tractor, riding and push lawnmowers, some attachments, and other man toys but with all projects this must start with permission from "she who must be obeyed." So with that said, I need about a 24 by 36 by 10 feet high pole...

My father purchased a 30hp chinese bulldozer about 4 years ago and his clutch needs replaced. Do you all know of any webs sites that you would recomend using to get parts? :confused:

I have a Generac 7000 watt home generator and need a new battery but can't find and do not want to replace the battery with another Generac battery as the current one only worked for 2 years. part number GEN-188443GS Does anyone know of an alternate battery to use? :confused:

I'm looking to buy a tiller for my TC 45. I plan on using it twice a year for a garden and some yard work. I found a one I like: King Kutter Rotary Tiller; Gear Driven Type; 5 ft Size; 25 to 40 HP; Category 1, 3-point Hitch Hitch Type; cost $1,400 Questions: What problems could I run into...

delete

I have a year and half old 45 A (with 130 hours) that is now hard to start the first time in the morning. I have to push the throttle way up and crank it a lot. After its warmed up, the next time it starts fairly easy. I've changed the oil and oil filter twice in 120 hours and changed the...

On my 45a PTO the 540 speeed is at 2500 RPMs. Is there an issue running a brushhog at 2000 rpms if it does not bog or should I always try to run at 2500 RPMs.:cool:

I now have 49 hours on my 45A -- Should I do the 50 hour maintenance or take it to the dealer? I can check fluid levels, change oil and grease fittings but are there any magic tests they do at the dealer that I would not know about and does it effect the warrantee :confused:

My wife thinks I need an Aerator. This is the first time she has suggested the I buy an attachment so I'm jumping on the bandwagon. I have 13 acres of which 4 or 5 are grass areas. The soil is sand/clay mix with about an inch of dirt if I'm lucky but no rocks. The house is about 8 months old...

I was working this evening with a subsoiler and I noticed that I can't see a thing in the back when it get dark and the same up front with the loader on. Are there any optional lights that NH sells or are there any good 3rd party providers of lights? :eek: :eek: :eek: :eek:

I'm looking to build a pole building or like for my tractor, some attachements and other "stuff" this summer. I was thinking 30 by 40 with a gravel floor. I have some questions and would appriciate some advice :confused: Is a tin/vinyl roof recommended? Do any of you have any plans? What...

I need to build 2 fences: one is about 1,500 feet long boarding my property line on one side to keep the crazy neighbor from encroaching on my land and to make sure my dogs do not roam over to his property & the other is about 300 feet to keep my Great Danes in during the day. I’m thinking of a...

I need to build 2 fences: one is about 1,500 feet long boarding my property line on one side to keep the crazy neighbor from encroaching on my land and to make sure my dogs do not roam over to his property & the other is about 300 feet to keep my Great Danes in during the day. I’m thinking of...

What are the differences? I know the DA is Hydo and the A is a standard. What is the D? :confused:

I have a Quick Release bucket on my new NH 45a. Is there anything special I need to know when shopping for an attachment for this? For instance for a forklift front end, different bucket..... Are there different types of quick releases? Does a Kobuta, JD, other NON-BLUE tractor attachment's...

Where is the best place to put a hook on the FEL? Is it alright to use the bar behind the FEL to hook a chain? Its a 45 a with an L16 FEL with a 73inch bucket.

I need a 3pt hitch tool for digging some small trenches. It has to be cheap as my financial advisor (wife) is already at her limit with the cost of the tractor. Here is what I want to do: Bury plastic drain pipes from the house's gutters (about 6 to 8 inches) I need to run the drains about...

I'm purchasing a NH 45 this weekend but I had one more question before I do. What are the advantage and disadvantages of a manual & Hydro trans? From what I've read, Hydro's are more expensive (around $1,800) and have more potential for parts to break. Do they cost more to fix? How long...

I just recieved a quote on a new 2006 New Holland 45a, 4wd, FEL, ROP for 23,269 including tax. High - Low - Just about right? :confused:

I've received a quote on a New Holland 45a with 4WD, FEL, ROP, & Filled Tires of $23,267.00 including tax (tax was $1,090). What do you think -- high/low/just about right? Any major concerns with New Hollands? :confused: The dealer seems to be ok.

I've been quoted and out the door price of $22,176 for L4400 with FEL, toothbar, & R-4 Industrial tires. Is this a reasonable price? Has anyone heard that they are discontinuing these next year? The New Holland 45a was quoted at $24,000 out the door. Anyfeedback would help:confused:

I need opinions as I don't want to make the same mistake twice! I'm looking to buy a new tractor as my current 38-hp China tractor has become too much to maintain, find parts, & is generally a lemon. I have 13 acers, hilly, with a lot of woods & a long road to the property to maintain. I'm...