Search results

Yeah, I did that in step 5. I have a buddy that works on these, and he told me he knew this machine and it sat a lot, and he has seen this issue before where condensation mixes with the oil and can clog the filters, so I replaced the filters, and when I dumped the oil it had a green hue to it...

So, I acquired a 33g high flow and just got a High Flow Brush Cutter. It works great, but I noticed that when I run it, it seems to make the tracking a little lethargic. I was wondering if I am doing something wrong, or is this normal behavior. The way I crank it up is: 1) Warm the machine up...

Seems to have hit a sore subject, and I thought I was the only one who had issues hooking up and unhooking up a bush hog :ROFLMAO::ROFLMAO:

Sounds like you could use the PTO link;);)

Yeah, I have some stories too, but I also had a buddy that was stuck down in a well cavity that was sent to ICU, and now carries an EPI pen everywhere he goes...Funny, well not funny, ironically, I have a huge yellow jacket nest that is going to be eradicated tonight or tomorrow. Luckily, I hit...

@walnutman The JD dealer who was selling it. He said I could run hedge trimmers off my third function, but not a land shark. What is the flow rate on it? I could probably run it off my skid steer since it looks like it would fit.

I looked at one of those for my JD 5075E, but was told it would tax my Hydraulics, and I needed to get the one that a Hydraulic motor mounted to my pto to run it. Great for Ponds and Firebreaks! I also learned that lesson about the lines with my Grapple. When that happens to me, I crack the T's...

Thanks @Jerry/MT When I googled it, it was on yesterdaystractors forum, but the address was an older one fergusonenthusiasts.com That site is down. This is the new one Home | Ferguson Enthusiasts in case anyone else is looking. It seems like it has a lot of resources. In my toolbelt. Thanks...

Just blame it on me:ROFLMAO::ROFLMAO:

I found this on their site for fitament: The PTO Link® HD System is our most versatile model. It’s designed for heavy duty applications with compact or utility tractors rated from 35 HP up to 130 HP (engine net), and with most 3-point hitch or pull behind (drawbar) implements. PTO Link® is...

Well said...been there, done that, got the T-shirt. Now, anything I build on the Farm is twice the size I think I need! Still have time, God willing!🤠

If this is the one you're looking at Amazon.com it's the female side. You'll need the male side for your implement.

Yeah, me too. I started using iMatch years ago, and I use it for everything except my Auger. I used to dread swapping out the bush hog since it basically lives on the tractor until I need to run harrows or a tiller, and was a pain at times to get the coupler off the PTO. I found these little...

I like the way you think. :cool::cool:

You won't be disappointed, and their support is excellent too!

Here is a video that shows how fast it works Good Works Tractors - Get the PTO Link® A Complete Game-Changer! (51 seconds) - PTO Link

If you all haven't heard of these, they are game-changers for me. First, I use the iMatch quick connect/disconnect system LVB25976: iMatch™ Quick Hitch Coupler Attachment, Category 1 | LVB25976 matched up the PTO Link Easy PTO quick connect for tractor attachments. You can probably find the...

Thanks, and figured as much. I will stay with JD till factory warranty expires...thanks everyone

@Ortimber I'm with ya, and not complaining, but was just wondering if there was a difference other than fear factor

Our 333G calls for John Deere Hydrau, not hyguard. Part number TY27366, but I wondered if anyone uses a different brand. Our machine still has a year warranty left on it, and I was worried about voiding it if I use off-brand, because 2.5 gallons is about $90.00. I'm open to using other brands...

Well, I will answer my question so everyone can see what I learned. This model has carbide teeth that you replace when they wear out. I guess my next question is, can I replace these teeth with a knife-style?

We acquired this mulcher used with about 350 hours on it. Does anyone know if the teeth can be sharpened, or do they need to be replaced? If so, do we do them in phases or all at once? It looks like two large Allen Bolts hold them on, and I think there are 30 total. Thanks in advance....new to...

I have an AGT-HFRC72 High Flow rotary cutter I got for our 333G that was locked up. Only two parts make it work: the Hydraulic Motor, which I tested and works. I think the prior owner did not know there was a grease fitting that needed to be greased regularly, since there was none in it when I...

Update here. So, I replaced the pump, checked the lines (all clear fuel), pulled the primary filter to check for any more debris, cleaned all vents (even left them open while I tested the system) It fires right up and will idle as long as I want, and I even let it idle for about 30 mins with no...

Going to grab a pump today. I was curious, is the pump pulling fuel through the filter first, or does it go through the pump first, then the filter. I can't tell yet as I will need to move the primary filter to even see the hoses. This machine is a DEF machine, and is very tight on that side. I...

It’s definitely electric, and I think the pump is before filter, which would seem to be problematic since it would get debris in it before going through the primary filter

We have a 2021 John Deere 333G Skid steer that keeps shutting off at higher rpms, and we can't figure out why. We replaced all filters, primary and secondary fuel; and purged system as explained in service manual. We had some debris in the tank from a saddle tank that manifested itself in the...

10-4. I'm going to try to get it this weekend. I am sure I will have a lot of questions. :) I'll post pictures as I go. All four tires are flat. I hope they'll hold enough air to get on the trailer. I love working on these old things and bringing them back to life; especially this one since...

Thanks @mike69440 . I didn't even think to look when I put the front lightbar on. I didn't need to take it out, just drop it. Glad the wires are there though :)

Does anyone know if the wiring for the rear LEDS is pre-wired for all three possible positions? My 2023 has one on the driver's side. I was going to move it to the middle one and get a little bit bigger one. I'm just curious before I get in that headliner if I may have to extend the existing...

Yeah, there's that. Luckily, I don't need anything else right now, and have several cycles of maintenance parts.

Yeah, Kubota is proud of their parts. I needed the grey Push Rivits for the headliner inside my RTVX 1100. They were $1.62 apiece. I couldn't find them anywhere else that size in great, only black. Crazy.

Yeah, I learned th Yeah I learned that lesson the hard way years ago. I finally found a local welding supply company that helped me out, and I use them exclusively for all gasses. They just swap out my tanks, no questions asked.

I didn't know this thread existed. I mainly use my Oxy-acetylene kit for cutting or heating metals with a Rosebud. Now that I have a Plasma cutter, I cut more with it. I have a gate that is made out of Aluminum, and a buddy of mine who teaches welding fixed a crack with a tig, but it didn't...

Yeah, once I figured out where that sweet spot was, thanks to this group and not the manual, it cranks up great and no stumble at all. Love this forum!

@truckdiagnostics we have the 1100c, and I was considering the block heater until I figured out how to properly use the glow plugs LOL. The heat in ours can get unbearable so you should be fine there. We have it out in low 20's and had to turn heat down. Now looking where you live, I am sure it...

I have a 2023 1100c, and if there is pressure on it, I have to do the same thing. I think it's the tranny. If I have a lot of pressure on it, and it won't shift, I shut it off shift and restart it, but that does not happen that often.

@mmancuso13 thx. Finally figured it out with a little help from my tractorbynet friends. Actually used it today🤠

Yeah we are happy with them; very bright. We may have needed a snow plow here in n fla this week. We had 4” of snow😳😳. Not very common around here, but that cab heater is great

I'm a Deere guy, But Cats and Kubotas are great too. Make sure you can get service on whatever you get. In our area, we have a Beard (John Deere) and Ring Power (Cat). Not a big fan of the Kubota dealer here, but their service is great!

Thanks, @DJ54, and thanks for that link...very helpful

Thanks @KCTractors , what book would that be? I'm gonna get the shop manual for it.

I am going to try to restore a Harry Ferguson Tractor. I believe they were made up to 1951, but I am unsure. It was my wife's father, and he passed away in 2020. I wanted to restore it for her. I called yesterday's Tractor company and gave him the Serial on the tag, TO-127576. He told me it was...

Here is a picture of them out back on our property. Like daylight! Good to hear!

Here is a link I use to find parts for the 2023 RTVX 1100 C that you can start with. It has all the diagrams and part numbers. Just change the to your RTV. I hope it helps! Kubota Tractor RTV-X CAB RTVX2C-SCLA2-1 / RTVX2C-PCLA-1 / RTVX2C-PCLAS-1 OEM Parts, Kubota Tractor

They are dual-row Bright white 43200 lumens. The only lights we have out here are the stars since we live in the middle of nowhere. They sure light up the night :) Gonna get brighter ones for the rear next since we need a lot of light back there, too and the stock ones just don't cut it

That's pretty cool. I did the same thing on a boat I used to own. It was a 30' Glacier Bay. It didn't have a generator but had A/C and other 110-volt stuff that only worked when on Shore Power. I had a box made and a stainless exhaust manifold. Gave us air conditioning when offshore on those...

I also found some LED Headlights on eBay that work great. The only thing I needed to do was double up the gasket to allow it to tighten in the socket better. https://www.ebay.com/itm/166989491518

I found these on Everything Kubota. It comes with everything you need to install. It's a bit involved to install them since they come with their own wiring harness and relay, but it's worth the time. The only thing is that the 3-wire switch doesn't work efficiently with factory on-off, but it...

@jigs_n_fixtures ...that's a darn good hack!

@Beaud39 I'ven using this stuff in all of my diesels for years, and I swear by it. US diesel is dirty by industry standards. Also, I use a product called Killem for diesels that sit more than others, but after reading some of the threads, I may use it in all my farm equipment. Like someone said...

Too funny; been there, done that, and have the t-shirt. That's why I carry a small boat anchor with me in the event there is no tree to hook winch to, LOL

There is a way to get more speed out of them, but I won't mess with the governor on it. I don't need speed; I need a workhorse, and you are so right about fuel. I got this one back in November. I use it just as much as my Ranger around the farm, and it sips fuel. The thing is built like a tank...

Worked as you explained, thx

So, this morning it was around 29 again, and I tried the trick of positioning the key between on and crank, and found the sweet spot where the glow plug indicator lit up, wait 6 seconds, and she cranked right up. Thanks for the assist everyone. I am new to Kubotas. Always been a polaris person...

LOL @etpm I bet it would be worth it up there. Glad to be here. Very helpful. To be clear, we're like S Georgia here N Fla. 🤠

Thanks, everyone. I will try that middle area in the am when its below 30.

Thanks @RjCorazza. I've had some of those Diesels, and tried that first. I was told by the service tech here to check the relay. Gonna check that later.

New to this RTV, and this morning it was about 29 degrees. The manual says turn to glow plug spot on key for 5-10 seconds. I only have 3 positions; Off, On, and Crank, so I put it in on position for about 10 seconds and never saw the glow plug indicator light up on the panel and it didn't want...

Just an FYI: I think I found out that those holes are for attaching a snow plow or blower.

Does anyone know what attachment bolts onto the front bumper on either side of the receiver and the bolt pattern? (see below) I tried M12 and M14 course bolts in the holes, but they didn't fit. The M14 tried to start but didn't thread in. It may be fine-treaded, but I haven't checked yet.

Mine is 2023, and I don't know if it has that either. Is it one you have to open? I have to slam doors unless I leave the window cranked down a little

Thanks...Good tip!

I echo @Paystar comment. Those are fabulous sideboards gonna make me some. Did you fabricate the steel or did you find the tube stock for the RTV? I find it harder to find accessories for my RTVX 1100 c than for my polarises. currently looking for new aggressive tires with rims

I got a 2023 Kubota rtvx 1100C diesel, and having a hard time finding accessories for it. I want to replace the headlights with LED and was wondering if anyone has a link to some plug-and-play LED headlights. I use to own a polaris Ranger, and accessories seem to be easier to find. I really...

I have a 310j (4045HT054) with aprox 1200 hours on it, and recentlly drained fuel tank of about a gal of diesel to remove water and impetiments, and fuel filters both primary and final. The manual says turn key to run position for 60-90 seconds to prime system, but it didn't start, so I cracked...

Hey everyone. I know I saw one somewhere, but can't seem to find it. I have a John Deer 5045E with the front end loader 553. I have a grapple, Bucket, and fork lifts, but saw there was a grading blade available. I can't seem to find it now. Anyone have an idea of a part number? I tried my local...

I have a Deere 5045E and am glad I found this forum! :cool2:

I have a Deere 5045E that was running fine. I went to start it tonight and it cranked over, but the wouldn't crank after that. So, I started researching from starter back. Here is what I found. There is a 10 amp fuse that says starter relay that was blown. I put another one in, and when I turned...