Kubota RTVX 1100C Front Bumper holes

   / Kubota RTVX 1100C Front Bumper holes #1  

tassmannn

Bronze Member
Joined
Sep 14, 2017
Messages
90
Location
Saint Marks, Fl
Tractor
1985 Ford F250 6.9 IDI, 2006 Ford F250 6.0 (bulletproofed), JD 5075E, JD 994R, JD 310J (5045Ht054), Kubota RTVX 1100C, CAT D4G, 1954 Ferguson TO30, 2021 John Deere 333G High Flow
Does anyone know what attachment bolts onto the front bumper on either side of the receiver and the bolt pattern? (see below)
I tried M12 and M14 course bolts in the holes, but they didn't fit. The M14 tried to start but didn't thread in. It may be fine-treaded, but I haven't checked yet.
rtvx1100cfront.jpg
 

Attachments

  • rtvx1100cfront.jpg
    rtvx1100cfront.jpg
    127.7 KB · Views: 67
   / Kubota RTVX 1100C Front Bumper holes
  • Thread Starter
#2  
Just an FYI: I think I found out that those holes are for attaching a snow plow or blower.
 

Tractor & Equipment Auctions

2016 Big Tex 24ft. T/A Flatbed Trailer (A50323)
2016 Big Tex 24ft...
2021 VOLVO A40G (A52472)
2021 VOLVO A40G...
Ford Transit Van (A52377)
Ford Transit Van...
Husqvarna 120 Chainsaw (A51573)
Husqvarna 120...
FRONTIER LR5060 LOT NUMBER 148 (A53084)
FRONTIER LR5060...
2024 JOHN DEERE CP 770 LOT NUMBER 21 (A53084)
2024 JOHN DEERE CP...
 
Top