Search results

Has anyone found more or less direct LED replacements for the cab lights on a DK45s? I have one that failed completely and the others just don't give off much light. The dimensions of the stock lights are (pics below): 5" wide (with side mounts) 4.25" high 3" deep They are marked at 35 watts...

Before I just start removing bolts willynilly, what is the best way to get into the cab liner on a DK45SC? I've got some serious stink up there! There is a youtube video of a guy removing the top of a NX cab. Is it the same on DK? THANKS ALL! Billboe p.s. While I'm in there I'm thinking of...

I want to raise a section of our driveway (where it meets the main road) about 1ft. I'm thinking about putting 5" minus on the bottom and then 3/4" minus on top. How easy will it be to "grade" the 5" minus? I have a back blade and a crappy box blade (and a bucket of course). Or should I go...

Hi All, I had a pivot pin come loose (see 1st photo) which caused (I presume) the ?bushing? to break on the bearing box (see 2nd & 3rd photos). This is a DK45s with the KL451 loader. My question is whether the bearing box can be repaired (by a good welder?) or do I need to replace the whole...

i've had an oil leak at one of the plugs since the dealer changed my oil last fall. i finally got around to changing the oil myself and wanted to fix the leak. anyway, below are the two plugs and i'm guessing the one on the right (the one that was leaking) is already a self tapping plug... is...

hey all, just went to start my dk45s and glow plugs came on fine but when i turned the key to crank the motor it just went dead. it may have made a bit of a strange sound, but, definitely didn't crank and the dash went black. now when i turn the key i get nothing... no dash lights, no clicks...

Hi All, My DK45s is in the shop to get the shift forks replaced. The dealer just told me that they needed to remove the cab to do it (an additional 13.5 hours). That is over twice the time they told me to replace forks. That adds up to 3x the quoted price... So, did they really need to...

So, my DK45S won't start (cranks but no combustion). At 1st it was intermittent but now nothing. I believe I traced it to the stop solenoid pull not getting enough voltage. FYI, this tractor has a 2 pin fuel stop solenoid (1 pin is pull and 1 pin is hold; ground comes from the engine). Here...

Hi All, The push button latch on the back window of my DK45S is missing. Does anyone have part numbers of what I need? Thanks,

So... I just bought a Kioti DK45s with loader, backhoe, grapple, rake, forks, and box blade... I estimate that the total weight of equipment is about 8000lbs and it needs to be transported about 180 miles. I have access to a trailer and I own a 2006 Chevy 1/2 ton that is supposed to have a...

So... I just bought a Kioti DK45s with loader, backhoe, grapple, rake, forks, and box blade... I estimate that the total weight of equipment is about 8000lbs... The problem is I don't know how to get it from western mass to central Vermont... One trucking company quoted $900... The tractor is...

Hi All, I'm looking at a 2008 Kioti DK45S. In addition, it has: - cab w/ air & heat - loader with quick attach bucket - KB2385 backhoe - shuttle shift - dual remotes (are these standard like the LS?) - ~1000 hours - promised to be in very good shape He is asking $28,000... What...

Hi All... Looking to get back into the "game"!!! I'm hoping for a price check on the following: L3130 GST w/ 450 hours (3 years old) LA513 loader (less than 1 year old) Woods BH7500 Backhoe Woods 60" brushbull (not sure of the model?) Drag behind snow blower (not sure of make, model, or...

Hey Folks, We're in the process of designing a website for a non-profit that I'm working for and we would like to implement a user forum. What software is TBN using? Is it working well? Easy to setup and administer? Would you recommend it (or any others)? Thanks in advance for any...

Anyone help me with a price for a 2005 JD 110 TLB? It is from a rental yard... Only 180hrs (rental hours that is!)... Doing the "build" on the JD website, it comes to $48,830 (see below). They are asking way too much ($37.5k), but, I want to know what would be a good price... Thanks in...

What\'s my L2850/FEL/BH/etc. worth? Whoops... I posted this first in the "general" forum but realized it would be more appropriate here... I'll go and try and delete that one. Also, I found the book value of the tractor (at Machinery Link) to be about $9000... That is for the tractor only...

I'm guessing this is going to be expensive!!! The "7T Spiral Bevel Pinion Shaft" broke on my L2850... This is the shaft that connects to "Propeller Shaft" (I'd call it the front drive shaft..). I'm not sure if that is the only problem. I've only removed the propeller shaft so far...

After reading Terry's post about his cat (sorry for your family's loss!!), I thought I'd see if anyone had thoughts about our cat's demise... It has been some months now, but our beautiful black longhaired cat "disappeared"... When he didn't show up for a day, I went looking and found half of...

I learned the WONDERS of a tiller this past weekend! They are amazing little devices! BUT, the width of the tiller doesn't completely cover my tracks. I have my tires spread quite wide and may be able to narrow them but I like 'em wide (much too much slope around here for a narrow stance!)...

My water system <font color=red>had</font color=red> two bladder tanks. One small one (~2.5gal) at the well head and a normal size one (?30?gal; ?4' tal & ?1.5' wide) at the house. This past weekend I noticed the small one was leaking, so, I just removed it and capped the hole. Is there any...

I'd love to have a threaded view of the "messages in the last x hours" feature. Then, when you click on a thread it would bring it up in "flat" mode (if you have it enabled in your profile). I find that if I don't get to read often enough the messages add up quick making the unthreaded view...

My tachometer is freaking out! It works ok (at least it seems to...) at low RPMs, but, it jumps wildly & suddenly past redline when I push the throttle. I removed the cable and it seemed fine... I then removed the sending unit (where the cable attaches to the gear case). I definitely have a...

Muhammad, Is there anyway to get tab characters into a post? Something like "[tab]" would be great! I posted a very simple table and it was difficult to make things line up! I tried "&#009;" with no luck... I know I could attach an HTML file, but, I just want it for very simple stuff...

Boy, they do like to make it confusing! I was trying to find the right Wix equivalent oil filter for my L2850… The Kubota dealer gave me one number that translated to one Wix filter and the parts manual gave me another number that, of course, translated to a different Wix filter. After...

I'm considering getting a trenching bucket (6") for my backhoe (sorry, I don't remember the model at the moment... it is a smaller kubota hoe attached to a L2850DT tractor). How "standard" are these things? Any possibility that buckets will interchange between manufacturers? I can dream...

Hello All! Just purchased a L2850 yesterday! Yeehaw!! It came with a Kubota backhoe (pto pump type) already attached (apparently, it hasn't been off the tractor in "some" time). I've dug all holes I need for the moment and would like to try one of the other attachments. BUT!! I don't know...

I just mentioned this site in another message thread, but, thought it was worth starting a new thread to let people know. I just found a Used Tractor Price Guide website at: http://www.machinerylink.com/resources/uevg/default.asp They limit you to 3 searches per day unless you register (free)...

What's a 1987 Ford 1910 w/ FEL worth? It's suppose to be very clean, have good rubber, wheel weights, and only 850 hours... The guy said to "make me an offer". Thanks! Billboe...

Ok... I gave up on the L2850 (thanks for the advice!) and now there is this L345 coming up for auction. It looks rough (stored outside; seats all gone, etc.) but everything seems to work and it sounds good. It has a L1720 loader and a L1570 backhoe. It has 34hp... They didn't know the year...

What is this baby worth??? I like the tractor, but, it seems darn expensive! TRACTOR, Kubota L2850, 4x4, w/ HD loader (model 500), 33HP, VERY clean, 265hrs, always garaged, Gannon box/ripper w/ tilt, GST tranny; extra hydrolics rear (powerdown); brush guard; rops Thanks for any help! Bill