Search results

Long as you are un-jabbed.;)

Nope. Never had hail like that.

My current credit is $321.

OK...now tried it again...and it does show the text. Lag time ?

But I tried to edit the post to say "yes it works", and all I see is the photo, not the original text above the photo.

Can't see what I wrote to edit.....only the photo shows....so to edit, have to make a new post ?

Well let's find out. New layer of compost in hoop house.

I built 3 compost bins while back, 10'x10'x4' high in the back on a concrete base and keep two of them filled with a mix of horse manure, sawdust, chicken manure, cow barn cleanout, wood chips, wood ashes, leaves, etc and flip one into an empty bin and flip the other into just emptied bin. I...

Just put some new AAA's in it, and haven't reset time/date, but the readings are from right now (9am Sat morning). You GOT to love a wood stove !

Years back, I got tired of replacing those thin wall pipe feeders....seems between me moving them with the tractor and the cows shoving on them, they would last me a few years, then end up in the scrap metal pile. So I set out to build "The Last Dang Round Bale Feeder". Worked good for 10...

So Tuesday last week, killed one of the pigs. Got everything cut/wrapped and in the freezers. Put the bellies and hams in crocks of brine to cure on Friday. Pulled the cured bacon out Wed, and put whole slabs in freezer because it's easier for me to slice if partially frozen. Pulled them out...

You might want to be aware of an inexpensive fix if it quits running. Freezers are an integral part of our food storage setup, we have 6 smaller (7-9cuft) chest models. Our way of using them is fill, use (keep a good inventory on top the lid) and condense them down as we eat out of them. Idea...

We've gotten Duroc feeder pigs the last couple years, and they seem to out grow about any about any breed we've ever had before. Here they are the first week of May....couple of 30lb weaned piglets. Our Border Collie is around 50lbs by comparison.....and trying to herd them. Killed the...

Original shop built 1983. 24x36. 8' ceiling downstairs, storage loft overhead. By 1995, had outgrown it, so tore most of it down, added 50' to the slab floor and built new building. 14' ceiling in the main part with 1/2 the original loft of the old building left in the back end with couple...

Battery in my tractor died today. Been starting just fine, no hint of being low voltage, nothing. Turned tractor off a minute, went to start and heard one little "pop" sound, and then nothing.....nothing electrical on the tractor would work. I thought "Huh?". Got a test light, check the...

Ok....I bought one of the Saw Haul chainsaw carrier and mounted it to the left side FEL post about 8-10 months back. Well, it became useless today. It depends on the scabbard to hold it in position, and the scabbard PLUS the plastic insert that holds the scabbard in the metal frame are made of...

Neighbor of mine is getting his new house bricked. I stopped by the other day and got to laughing at the masons scafold setup. They put three sections on top what the photos show. If I'd done something like this, OSHA would have problem parachuted in with fine book in hand.....ahahhaaaaaaa.

Nov6-Nov11th. https://www.amazon.com/prime/promo/pricing/landing?promoID=A3J87G75D3ZPEJ&ref_=us_mil_cs_2 Seems to work about 1/2 the time, I'm having to email VeteransDay@Amazon.com to try get it. YMMV.

Put my wife a tractor bucket of compost in the hoop house yesterday and she worked on spreading it around the beds today. I took a few pics of what she has growing now, and the sweet potatoes she harvested today. She has onions, lettuce, potatoes, tomatoes, broccoli, cabbage, green beans....we...

Click on 3rd icon from the right in the top row above. A box will open "Insert Image". From there, you have two ways. 1. From Computer: Click on that one and select "Browse" to go thru photos on your computer, select the one you want to up load and it will put a thumbnail of your photo(s)...

2011 LX410 with 1850hrs Went to use the tractor Monday and noticed a puddle of lube on the floor, had run down the right side tire inside. Removed wheel/tire and checked to make sure the ring of bolts was tight around the plate that hold the hub....hoping maybe they had come loose enough to...

Fall came bit early this year. Our pigs got way big way quick, normally figure on about November, but they were over 400lb by mid August. First time I've raised Duroc's and seemed like they just jumped up there ! Finished both of them last week. Nice grilling chops and a couple of loin end...

When I can't sleep, I count gates instead of sheep. Main drive: 2 Cattle pasture: 8 Cattle barn/corral: 7 + head lock Hog pasture: 3 Chicken house/lot: 4 2 Garden areas: 10 34 total....most drive thru size, 8 of them walk-thru.

I installed a Mitsubishi 18,000 BTU mini split about 20 years ago....mounted the indoor & outdoor units, ran the piping & wiring....fairly easy job. Paid a HVAC guy to come out, vacuum down the lines and turn the gas loose from the pre-charged compressor end. Worked fine all those years...

I guess here as good a place as any to post this. About 12-15 years back, I bought a battery from a local place for my previous tractor. They got them in dry, and added the acid to them there. I asked about buying one dry with acid separate, guy said sure, I'll sell it that way. So I bought...

OK.....I'm stumped. 2011 Yanmar with Yanmar loader that hasn't had a problem since new (other than the curl has slowly tilted forward for several years.....I can live with it), and worked fine yesterday. This morning I get on it, the loader will only lift about 12" and seems to hit a dead...

Neighbor I sold 33ac to is building his house. I helped him set the floor trusses the other day using my mini-excavator. Didn't have near enough reach, so we took the bucket off, strapped/chained a 16' 6x6 to the stick, and it worked like a charm. Yeah.....I know....not OSHA approved....don't...

Asking for a buddy....he has an LS tractor, and noticed the steering wheel will keep on turning left or right beyond the limits the wheels will actually turn, and wonders if there is something wrong with the steering if it does this ? I asked "did it steer correctly when he turns the...

Been studying on how to turn clay to good garden soil, and one way seems to be using wood chips for mulch....just keep adding them year after year. Went to a presentation at the MEN fair couple months ago. Guy passed around a jar of his original dirt, then another after a year of wood chips...

Espalier is the ancient horticultural art of pruning and training a tree or shrub to grow flat against a support. I have a 7' high retainer wall below my driveway doing nothing, so last year I set out 4 pear trees at the base of it, spaced about 20' apart. Couple days ago, I got started on the...

Takes me 2-3 weeks to get a shed's worth down and out of the woods, then cut/split/stacked in one shed working at it now and then.......like days it's not raining/snowing/too cold. Each shed holds right at 4 cords. Wood dries in them for around 2 years, then we move a shed's worth to the...

I'm considering building a snow plow for the FEL of my tractor, using a quick attach plate. This will be just for my driveway (paved) and maybe a neighbor or two.....nothing heavy duty or commercial. Worst snows we have here run 4-12". I can get a used plow that went on a pickup truck for...

Re-built my deck 10 year ago....pressure treated lumber structure with 'plastic' decking board top. Most of it is just fine, but one place that does get a lot of water runoff, the treated lumber has completely fallen apart. 6x6 post rotted out, joists connected to it rotted out. "Wolmanized"...

Plastic back of the seat popped off the other day. Was filling the tank, noticed the seat cover edges were exposed....what ? Looked down behind the seat and found the back cover, normally held to the seat and covering the seat cover edges, had popped all 4 screws thru the plastic and fallen...

We had been storing our potatoes for years in milk crates, baskets, etc, and couple years ago, I came up with these homebuilt screens that work a whole lot better. Allows air circulation around all the potatoes, if one goes bad, it doesn't take out those around it like putting in a box, and it...

Trying to help a neighbor of mine with an older MF135 with gas engine. It only ran enough for him to get it over to my shop with the choke pulled all the way out....push it in even a little, and it would die. He bought the tractor from a guy that almost never used it....only 600hrs on the...

For the 3rd or 4th time over the years I've owned my 2012 LX410, something has gotten in the tank and block the fuel flow out of the tiny 1/4" fitting in the bottom of the tank. Last time was a week ago....couldn't run it more than 10 minutes without it shutting down from fuel starvation. You...

Thanks, I went to the dealer with the intent to come home with the machine, and we dickered over the price...he was several hundred over the website's MSRP price, and the longer I dickered with him, the more it hit me I was about to spend 10 grand on a toy.....so I left. Came home, put a 3"...

Picked mine up yesterday.

No, either SIX 12v or NINE 8v depending on the model...not 12. My current golf cart has SIX 8v batteries (48v system)

Dual motors, no drive train. Trojan batteries, either 6-12v or 9-8v depending on model, under the seat.

I'm looking at a Recoil w/o the rear independent suspension (can't see 3 grand more for that the way we'll use it), 4x4, 72v electric. Anybody got one or experience with one ?

Went to do something with the tractor, put the shuttle lever in reverse, and it wouldn't come out....finally managed to get it into neutral....was scared to shut it off in reverse thinking it wouldn't start again. Pulled the panel off under the steering wheel to look at the linkage, couldn't...

List something on Craig's List. (Short version)-> State the condition of the machine (ATV), why I'm selling (my age), contact me by CL email, I'll send you my phone number, I don't text. 1st responder: Text me at blah, blah, blah 2nd responder: Any issues? Why u selling ? Is reading...

rub the sprouts off at any point in storage ? We grow/store a whole lot of our own food, and I built a root cellar years ago for things like potatoes. Store them on some screens I built after finding they needed better air circulation to keep them from going soft or rotting storing in old milk...

They've been prowling around my chicken coop for the last week or two, hitting the feeder 'breakfast bar'. Chickens are securely locked in coop with automatic door that closes at dusk, opens at dawn, so no losses there, but I was tired of feeding the neighborhood. Put a game camera out to see...

Working with my State representative on the recent Native Timber act http://www.tractorbynet.com/forums/rural-living/359448-new-law-tennessee-native-timber.html has gotten me inspired to look at other things that can be done to get the govt out of our lives and wallets. For example, I know...

After 2 years of working with my legislator (Mathew Hill), there is now a new law in Tennessee regarding the use of lumber cut from native timber. Signed into law by the governor 05/20/2016, effective 05/23/2016. This law allows any commercial sawmill operator to certify (requirements below)...

Local Ford, New Holland, Case dealer that has been around at least 3 generations, was carrying Yanmar where I bought my 410LX. I had previously bought my 1925 model New Holland (in 1998) there. Great dealer to work with. As of 1st of January, they are no longer a Yanmar dealer. This is the...

I bought some property adjacent to ours, and cleared 3 acres of scrub brush, small trees, etc off it just before Christmas. Right now, it's bare ground, still needs roots/rocks/etc picked up (to wet to get on right now), and I was going to do that as soon a the ground can be gotten on, then...

I'd love to get rid of Dish, but still get the local ABC, CBS, NBC, FOX channels. We live down in a valley, and back when TV was analog, and before DISH, we had a roof antennae with a rotor, and could get about 2 1/2 channels via it. Now they've all gone digital, but I figure a roof antennae...

Fan belt broke the other day. Something the dealer didn't stock....3 days to get one. In the mean time, I went to local auto parts store with the old one and they cross referenced it with two other brands. Bought one there. Seems sorta early for a belt to break....my last tractor had...

Hit the end of mine almost in the exact same location on a table saw about 15 years ago. (photo below. Other hand from 30 years ago, also table saw.....turns out, table saws are quite dangerous....ahahahaaa) Cut from the underside almost into the thumbnail. Left thumb is about 1/2" shorter...

I'm interested in getting our timbered property (65ac) certified under ATF (wow.....is that REALLY their initials ? :D), as I understand it is the oldest, and easiest of the several organizations out there. Do you have a forest ATF certified (the green sign: Tree Farm) ? What did is cost you...

Had an older, smaller shed with a couple of tanks on metal stands in this location, but also had a large tree growing right at the edge of the shed. We got a pretty good snow last fall before the leaves came off, and the tree had been leaning pretty bad for a long time, so it came out, root ball...

Toss up between: 1. Electric golf cart with a truck bed in the back. Gets used EVERY day, feed critters, gather eggs, work in the garden/greenhouses, go get the mail/paper (1500' driveway) I have to keep the Yamaha ATV in the basement on a trickle charger now it gets so little use. (Comes out...

About a year or so ago, some Yanmar factory folks came to my local dealership, and he brought them out to my place to get my opinion on the LX410 I'd bought from him. He gave me a day's warning, so I wrote up several pages of things I thought could use some better design. They were kinda wide...

The History behind the Act: Tennessee adopted the use of State wide building codes in the last few years, whereas in the past, rural areas had pretty much been "building inspector free zones" (except electrical and septic). Along with that came the requirement that any lumber used in home...

I love winter time. I get to spend time in the shop building handy things when not spending time with my wife sipping hot tea and eating cookies ! Last week's project was build a couple 'baskets' to move firewood from the storage sheds to either the shop or the hoop house, where we added a wood...

Bought this old (mid 50's) Oliver manure spreader for 300 bucks off local Craig's List ad about a year ago, and finally got it in the shop this fall for a restore. Forgot to take pic of the start, but it was a rust bucket. Original sheet metal floor was gone, had been patched with a couple...

Recently bought a mid-90's IHI 35J mini-excavator. Like any 20 year old machine, it's going to need some work. Got in touch with the distributor, in Elizabethtown, Ky (800) 538-1447 and they were happy to email me a set of operator, service and parts manuals in PDF format. What a nice...

So my little hoophouse we got a start on late last year, we decided to finish it off this year with a concrete floor, pex tubing in the floor and in the new center raised bed. Last year, we got the main structure done in the fall, with raised beds around the outer edges. We grew cool weather...

Best way to keep chickens is fenced area during the day, and lock 'em tight at night. We use an automatic door on ours that opens in the morning and closes at night. When we seem to have raccoons around, I set Conibear neck traps in a bucket or box set, and bait with sardines. Took 10...

Been a busy week. Canned 60 quarts of new potatoes, dug the week before, and working on cutting up a beef we put in the cooler last week. Got one last hind quarter to work up tomorrow.

I personally store 6-8 55gal drums of diesel (and about the same of gasoline) and rotate thru them as long as 5 years old with no problems. I use PRI products (gas & diesel) which beat Stabil hands down, IMHO. PRI claims it will rejuvenate fuel that is 20 years old, and based on my experience...

My tractor dealer calls yesterday and says the Yanmar reps are in town and would like to get some feedback from owners, would I mind if they came out tomorrow morning (today) and talk to me. I said "LOVE TO"....So I spent a couple hours last evening writing up some of the problems I've had with...

2000 model YM600 Yamaha Grizzly Carb float needle has been letting gas run all the time for quite a while ( we'd have to be SURE to shut the tank petcock off each time, or find a big puddle of gas on the floor )....so I finally ordered a carb kit and rebuilt it. Got THAT issue fixed by putting...

My woodworking starts at the tree..... Then goes to the sawmill: Then goes to the wood shop built from the wood that went thru the sawmill: Then into the dry kiln inside the shop ( run with old window AC ): Most of the woodworking I do is cabinets and moldings, such as: But...

Wife of 41 years and I live on a 75ac hunk of mtn land in east Tn, not too far from the NC line. Bought our place in 1982, and I'm about 30 years into a 50 year project. :D I'm a 'sorta' retired self employed carpenter ( with a 7 year stint as a high school shop teacher ), wife is a retired...

This a pic of my system after the 3rd array was added ( Nov 2011 ) And this was in June, adding the last 10 panels onto the previous 10, which are ground mounted/fixed, and using the micro inverters. Using the Enphase inverters, you can monitor the power production online, so here...

We started down the road of solar power about 5 years ago, first putting up 12 175w panels (2.1kw) on a couple of single axis tracking mounts I welded up in the shop. Built a little green house for the wife at the same time so I'd have a place on the left end for my "power room" ( charge...