Search results

I want to replace the positive battery cable and aside from the price of the oem, I don’t care for the light gauge clamps. The question I have is there’s a second cable attached to the positive clamp with plug in connector that goes to the main 50 amp fuse. I’d like to replace this cable also...

Gotta love New England. Been a small rock that I’m always worried about the mower blades hitting, so I thought I’d pop it out today ? Not too bad for 22 hp.

Saw this while catching up on some news and thought I’d share it https://www.msn.com/en-us/money/other/this-tractor-brand-took-the-2024-top-prize-for-customer-responsiveness/ar-BB1hNMUi?ocid=hpmsn&cvid=12a19cd199d34819a9ee059ed51386be&ei=21

Have a Mahindra with a backhoe made by KMW in Kansas. It looks very similar to the 270b. Looking to see if some aftermarket Deere accessories might fit my bh. Was wondering if someone knows who makes the JD BH.

When I purchased my tractor about 6 years ago needed to create an account on their website to register the tractor and get the free hat. Was just notified by Apple that my password has been compromised because of a data breach. Not overly worried because vey little personal info was provided and...

Curious if anyone has tried on of these. Was thinking about it for lawn dethatching and prepping for overseeding. Maybe drag harrow would be better, but at $140 it got my attention...

My owners manual does not show any recommended valve checks or adj. But the MHI Owner manual and Service manual recommends checking them every 500 hrs. So after finishing up an oil change decided I'd check mine(490 hrs) Recommended clearance is .010. Found one at .002, a couple at .006 and only...

I posted a thread over in the hydraulic section looking to change the style of the loader QDs because a couple were leaking from my beating on them to releive the residual pressure on the loader side. Ended up having a difficult time finding replacements but learned a bunch about fittings and...

I have Mahindra max that has a couple of leaking couplings on the FEL valve. Probably my own fault because I put the FEL on and off probably once a week during the summer and when I go to reconnect it two of the female side of the couplings (hose end) need to be depressurized and I usually do...

I have Mahindra max that has a couple of leaking couplings on the FEL valve. Probably my own fault because I put the FEL on and off probably once a week during the summer and when I go to reconnect it two of the female side of the couplings (hose end) need to be depressurized and I usually do...

Just curious. My Max has an MHI SL3 diesel with Bosch Denso Injection. The Mahindra manual says the starting procedure is to put speed control at idle, hit the glow plugs (10 sec), then start the engine, cold or hot. The Mitsubishi SL3 Operation/Maitenance manual says the cold engine start...

Cold rainy day figured good time to change utf and filters. Everything went really well until it came time to remove the HST filter. There was no room to remove it after unscrewing it. Directly below the filter towards the front is a hard hydraulic line. Below and towards the back are the 3 flex...

Stopped by Ellington Power Equipment to get some parts pricing and found out they stopped selling Mahindra tractors and parts about a month ago. They were located in north central CT. Closest to me now are Orchard Hill in Belchertown, MA. and Dubay Tractor in Danielson,CT, both about 30 minutes...

My Max has two levers one to operate the 540 rpm rear pto and one to operate the 2000 rpm mid pto. Was wondering if the rear pto shaft rotates when the mid pto shift lever is engaged or are they totally independent from each other

Found a copy of the Mitsubishi SL3/4 operations and maintenance manual and have found it very useful. The SL3 is what is used in theMax series tractors.it appears that most of the information is applicable. Also have the service manual showing how to overhaul,adjust valves timing etc if anybody痴...

Used the tractor yesterday everything was fine. It's a Max 22 Went to start it this morning and it cranked with some white smoke coming out the exhaust, but wouldn't start. Cracked the fuel lines at the injectors and basically dry. Just to be on the safe side, replaced the fuel and air filter...

My new Woodmaxx FM 54 mower was delivered last week and after setting it up and putting in a couple hours cutting the lawn and some brush I thought I'd share what I've learned. Let me start by saying that I did a lot of research including reading the very long Flail Mower thread and couldn't...

I tried to get the information i needed from the +500 page flail mower thread in the attachment forum, then talked to a couple of suppliers and ended up being more uncertain then when I started looking into them. Bottom line is I'm wondering if anyone has any operating experience running a 48"...

Changed the fluid last week and was originally going to go with the Chevron 1000thf but turns out the nearest source is in Gardner, MA about 60 miles away, so ended up going to the dealer. When they told me $110 for 5 gallons I was a little floored because I checked a few places on line and saw...

Changed my hst fluid a few days ago on my Max22. There are 3 drain plugs. Two of them are on the bottom of each side of the tranny near where the axle tubes attach and the third is on the back side of the mid PTO. I couldn稚 figure out any way to remove the one on the PTO without taking off the...

Getting ready to do the 200 hour hst/hydraulic fluid change on my Max22 Going with Chevron THF1000. I looked at the parts list and it shows the there are M12 seal washers on the 3 drain plugs. Does anyone know if these are reusable or are they like a crush washer that needs to be replaced ?

I have a 2 year old Max 22 with about 170 hours on it. It's leaking hyd fluid from what looks like the mid pto shaft seal. Stopped by my dealer to ask if it was covered by the 5 year power train warranty. The dealer contacted Mahindra who denied the warranty saying it's an external seal. Was...

Was doing some maintenance on my tractor (about 150 hrs on it) and was going to check the torque on the bolts. It's a Max with FEL and Backhoe. Noticed that all of the bolts for the FEL and Backhoe are ISO metric or SAE and the manuals for these have recommended torque values and torque charts...

Thinking about adding SSQA on my Max22 which has a ML202 loader on it. Found a company called Worksaver that has a pin on adapter for the Max ML24 and ML26 loader that weighs only 85lbs. Was wondering if anyone knows if the pin spacing and size is the same on the ML24 and ML202 loader.

Was getting getting ready to do my 100 hour maintenance and popped the hood to look things over. Noticed that the oil filter still had yellow overspray paint on it from paint they put on the dipstick. See the photo. Thought this was odd since I had the dealer perform the 50 hr service and the...

I have a 2 year old Max 22 with about 150 hrs on it that has really not had any problems. I have gone to the dealer a couple of times with minor issues and questions and for the most part they've been very good as long as they don't need support from Mahindra. The latest issue is the FEL will...