Search results

I had a Kubota M4900 2wd manual shift for several years and after downsizing my property I wanted a smaller, 4wd tractor with a FEL. I bought a Kubota L2501HS in 2018. Both were excellent tractors - no significant issues. The only problem I had with the L2501 was a serious lack of PTO...

I had a Kubota M4900 2wd manual shift for several years and after downsizing my property I wanted a smaller, 4wd tractor with a FEL. I bought a Kubota L2501HS in 2018. Both were excellent tractors - no significant issues. The only problem I had with the L2501 was a serious lack of PTO...

This is my first tier 4 tractor so I’m learning as I go. After doing a lot of research I got pretty confident that the regen problems in the past were mostly in the past. I just bought this CK4020HST yesterday and so far I love it. But the salesman told me something that worries me. He said you...

My tractor shed is located on some rural property several miles from my house. It's way back off the road but there are two neighbor's houses within site so I don't think thieves will waste a lot of time or make a ton of racket if they try to steal my tractor. My equipment trailer is parked...

i talked to my local dealer (who is owned by a fairly large conglomerate) today about a new L3902HST and was quoted $31850 plus tax for tractor, FEL w/pin on bucket and R1 tires. I'm pretty sure that's MSRP+ but wondered if any of ya'll have priced one since they've came out. I did call...

I bought a new Kubota L2501HST in 2018 and use it strictly for bush hogging and a little loader work. I love this little tractor except for one thing. It does not have enough power to bush hog heavy vegetation. For loader work it's great and for light cutting it's ok. I know some will say I need...

Moved to Kubota owning/operating. Sorry, I don't know how to delete this post.

I admit that I seldom use anything but M but the other day I needed to creep along a bank and I tried to shift into low. After struggling with it for 10 minutes I finally got the lever to move. After I got past the spot I shifted it back into Medium with the same difficulty. Since then I have...

I've been kicking around the idea of buying a flail to use on a few acres of grass that I try to keep looking nice. I've been using a bush hog and it just doesn't give me the look I want. Anyway, I've found a used 5" Perfect brand Flail mower. I've checked and there are parts available for it...

I love my little 25 hp tractor. It's quick, it's nimble and handles like a dream. BUT, if tier 4 emission controls weren't in place I'd trade it in a heartbeat for some more hp. I had a M4900 prior to this one and really miss the extra horses. The L2501 does great for loader work but I get...

I have a L2501 with 5' Landpride bush hog that I use for cutting about 6 acres of heavy grass. If I don't cut it regularly and keep my bush hog blades sharp I have to go slow and even then it's all the little 25hp can do to cut it. I do cut it very short (2") because I want it to look as neat...

Anybody out there have any experience with floating docks? I want to build a dock on some lake property and would like to have a covered area for a picnic table, swing, etc. Covered area would be about 20' x 20' with a 15' walkway similar to the one across the lake. I haven't been successful...

A couple of years ago I bought a few acres out in the country that borders a little springfed lake (about 8-9 acres). The lake is about 15 years old and about 5-30 feet deep with no structure. I haven't seen any evidence of minnows or other baitfish for larger fish to feed on. I have caught a...

Anybody out there ever built an above ground outside storm shelter? My son needs one just big enough for 2 or 3 people in case of a tornado. A couple of companies around him build them out of pre-cast concrete but they are well above his budget.

Can anybody recommend a good online source for genuine Kubota filters and parts? I tried Messicks but the shipping was ridiculous and their sales folks left a lot to be desired too. Most times I go to my dealer (he's not real close) but sometimes it's easier to order online and have them...

As I sit around waiting for Sally to do her thing just south of me I've been reading up on some generator safety tips. I know when Laura came ashore in Louisiana a few weeks ago there were some fatalities from carbon dioxide due to a generator being used in a garage. Apparently the folks had a...

I have a subpanel with 12 - 120v circuits. The sheathing on the romex wires coming into the panel was cut back so far that I cannot determine which hot wires are paired with which neutral. Without going into a long explanation why, I have a need to know which neutral goes with each hot wire...

I've always been taught to grease my rotary cutter u-joints every time I grease my tractor and other places on my cutter (about every couple of days of use). For this reason I have always removed the plastic guards from the shaft. It's just too much hassle to move this crap every time to...

I'm posting this for my brother in law. He recently bought an old Super A and had planned on using it in his garden. He got a bunch of loose parts and plows with it but wasn't familiar enough with the tractor to know what he needed. After getting some help to set it up, he found out he only...

I'm looking into building an off grid one room cabin on a piece of property I have back on a fairly remote little lake. It'll only be used occasionally as a little get-a-way for a day or two at the time. I hope to power it with a quiet little 3400 watt 120v inverter generator. For water I...

I've been wanting a swing out by the lake for a while now and I found a local place that builds really nice ones. The lady that builds and sells them says that cypress is made to last outside indefinitely and does not need any kind of sealer or preservative. She said if you must put something...

I have two Champion 3400 watt - 120 volt generators. If I run the 120 volt feed from both of them to a 240 volt receptacle, wiring the hot wires from each generator to the two legs of my 240v receptacle, will this produce the 240 volts I need to run my welder?

I'm sure most of you have had pt lumber to twist and warp, especially the Home Depot stuff. I built a little grape vine trellis for some muscadines and really didn't want to rebuild this end since my vines had just started growing and spreading out. I wish I had taken a picture of the post...

I belong to several forums and have followed this one for several years. I'm not a big poster but occasionally I do have something to add. For the computer savy I guess it's no problem to attach photos to their posts. For the rest of us (especially me it's almost impossible. I don't...

My last tractor had a fiberglass canopy and it got beat up pretty bad so i'm thinking metal but haven't decided for sure. I've got a lot of low hanging limbs on my place. Also would like to get one that can be trailered without folding or removing. Anybody had good (or bad) experience with...

Can anybody tell me if my 2018 L2501 HST has a computer? It has direct fuel injection so I think it does.

This is a test.

Moved

Well, it's not quite $300, it is $292 so I'll have enough left out of three C notes to buy me a burger. I usually do my own service but decided to let the dealer do the first one cause I remember how hard these factory installed filters are to get off sometimes. I left it last week and they...

MOVED

I know my eyesight ain't what it used to be but I can still see pretty good. My old M4900 had a dipstick to check the hydraulic fluid and it worked quite well. My new L2501 has a sightglass that is hidden under the operators platform. I tried using a flashlight to check it and I figured out...

Only a dog lover can understand the real grief you go through when you lose a long time canine companion. We got two poodle/cockerspaniel mixed puppies 12 years ago and they have been a part of our family ever since. Named Buddy and Max, they were different as night and day even though they...

I moved to the Alabama Gulf Coast in 2015. My son had lived down here for about 8 years and although they didn't have any severe hurricanes, they got a couple that caused a few days of power outages. I had a 6000 KW Craftsman portable genny left over from Katrina where we lost power for 7 days...

I posted this in the wrong forum first. Then realized I need to be in the Kubota Owning/Operating. I was out moving some dirt with my fel yesterday and felt a definite shudder in my tractor every once in a while (New L2501HST w/22 hours). It felt kinda like a 4wd pickup when it's in 4wd and...

Post moved to Kubota Owning/Operating

I recently bought a new L2501HST and see a lot of other folks have done the same thing. After breaking a fan blade I started looking around for an aftermarket fan blade and the places I asked said “No, we don’t have any parts for that model yet”. I don’t know why but I was under the impression...

I had a Kubota M4900 for about 14 years. It was a very good tractor and served me well. I usually relied on Wix to supply my filters but had a weak moment and went to my Kubota dealer for 2 hydraulic filters and 1 oil filter. The Wix filters were usually around $40. I have done a lot of...

The owners manual specifies 15-50 synthetic (motor) oil in my PM34Z mower in the hydraulic drive system. I discovered that my dealer filled mine with 15-40 NON SYNTHETIC oil (and the cheapest stuff they make at that) so I decided to change mine (at 8.3 hours) I bought a filter from the...

I check EBay occasionally for a service manual for my Kubota M4900. Usually when I type "M4900" in the search field I get nothing. Today one item shows up - they are supposed to be some type of quick connect arms but they don't look like a part of any quick connect system I have seen before...

This story will hopefully make you thankful for many of the things we take for granted. TBone http://www.clarionledger.com/apps/pbcs.dll/article?AID=/20040903/FEAT05/409030326/1023

I am in the process of building a 28 X 36 shop building (hope to post some pictures soon) and the location required quite a bit of fill dirt. This resulted in three sides having fairly steep slopes that will be prone to erosion. When I poured the slab back in October I planted some ryegrass...

I don't know how many of you have heard about this on the national news but it's one of the most senseless tragedies I have ever heard of. This is the beginning of the nightmare for the Hargon family. http://www.clarionledger.com/news/0402/17/ma01.html This is the final conclusion to it (if...

Hi folks. I am in the process of building a 28 X 36 X 10 workshop and need some advice on insulating it. I need some insulation mostly for the condensation problems associated with metal clad buildings, not so much for the heat and cold, even though it does get hot as blazes down here. It...

I don't use a cutting torch a lot so I set mine up on propane rather than acetylene. I'm using a harris torch with a propane tip. Though not a pro by any means, I can do a pretty good job with an acetylene torch. But with propane I always have some slag on the back side of the cut, even...

Gravely Residential ZTR\'s Has anybody seen these or know anything about them?? I looked at them at a local dealer yesterday and they look pretty good for the money ($2000 for a 32" cut and $3000 for a 42") They both have B & S engines which I'm not that crazy about but other than that they...

http://www.cadplans.com/3pointhitch.htm

I have a Kubota M4900 that I bought almost a year ago. I really like the tractor. It does everything I ask and has been trouble free. There is one thing, however, that worries me. The rear end (around the pto shaft) gets REAL HOT - hot enough that your can't hold your hand on it for more...

I fly my flag most days and will for sure tomorrow. Would it be proper to fly it high or half mast?? I would like to do it in such a way as to honor the ones who lost their lives while at the same time thumbing my nose at the terrorists. How are you guys planning on displaying yours?? TBone

I have a buddy who fell in love with a 990 on a local dealer's lot. Trouble is that one was sold and the dealer is looking around for him another one. Before he signs on the dotted line, can any of you relate your experiences with this tractor, both good and bad. There's not a lot in the...

Rick's post prompted me to start this one. (Sorry Rick, I can't help you with Ashville, Indiana) Back in the late 60's I lived and worked in this small town in Western NY. It's southwest of Rochester and southeast of Buffalo down toward the Pennsylvania border. Every time I see a post from...

I have a Kubota M4900 that I bought back in February that I really like and have had 0 problems out of (I think). I use it mostly for mowing and very seldom have the need to use the draft control. The other day I was plowing under the remnants of my garden and decided to use the draft control...

Those of you who do stick rod welding know how difficult it is sometimes to start your rod in exactly the spot that you need to, especially when welding small parts. I think that one of the auto darkening helmets would be nice for this. Do any of you guys have experience with them? On ebay...

FELs arn\'t worth the risk! Ha, I knew that would get your attention. Unlike the other "arn't worth the risk" discussions, I would like to keep this one friendly. I don't own a fel - never have but I won't say I never will. After reading a lot of posts saying they are the greatest thing...

A friend of mine recently told me about this site: <A target="_blank" HREF=http://www.agri-supply.com>http://www.agri-supply.com</A>. They have a big variety of farm, shop and home supplies at pretty decent prices. I have never seen it mentioned on TBN and just thought some of you might be...

I understand the difference but I can't decide which one I like better. My new Kubota M4900 has independent and I haven't had a chance to try it yet. For rotary cutting (which I mostly do) which one is best?? I have gotten accustomed to keeping my foot close to the clutch with live pto and...

I know this is a dumb question but what are the advantages of hydrostatic steering over regular power assisted steering?? I have had both and can hardly tell the difference when they are both operating properly. On one of my older tractors the hydraulic pump was weak and barely able to lift...

I bought a Massey Ferguson 231S in July of 2000. It is a mid 40's HP very basic utility tractor. It has been dependable and does everything I need it to do. I DO NOT LIKE THIS TRACTOR! IT IS LOUD! IT IS UNCOMFORTABLE! IT IS NOT USER FRIENDLY! I wanted a Kubota when I bought it but didn't...

I noticed that the new synthetic Slick 50 can be used in diesel engines. Has anybody out there used it in their tractor?? I was thinking about giving mine a dose with my next oil change. (I don't use synthetic oil - I use Chevron Dello)

I remember when I was young and foolish (I'm still foolish but no longer young) and I got a piece of wire wrapped around my brush hog blades, I would raise it up and get under it with my trusty pliers to get the wire off without even thinking about it falling. Luckily I never had one to fall...

Last summer we built a (covered) wooden deck onto the back of our house. We previously had a concrete patio that wasn't covered and we rarely used it because it was either in the broiling Mississippi sun in the summer or in the drizzling rain in the winter. The covered deck is wonderful. We...

I was reading a post on another forum (ytmag) the other day and somebody made a statement that they could buy an old tractor cheaper than they could pay the taxes (I assume they were talking about sales taxes) on a new one. In Mississippi, the sales tax on all farm equipment is 1%. In...

Cell Phones - Blessing or a Curse? Although I fought the urge for a while, my love for gadgets got the best of me and I purchased a cell phone. I hate to admit it but it has been a comfort to have it with me at times. I commute about 100 miles roundtrip each day and most of my "tractoring" is...