Search results

I have a New Holland Boomer 30 with hydro trans, which I think is very similar to the S3010. The LS made boomer has the Mitsubishi S4L 28hp engine. IMO it’s a well built, heavy CUT. Ive put 1100 hours on mine. Most of the hours with a tiller, brush hog, 8” chipper, and box blade. Only...

I hit a ground nest with my open station and got nailed twice by hornets before I realized what was happening. Then I got my cabbed tractor and hit another ground nest. “Hey, look at all those hornets on the other side of the glass”. It’s a good argument :) For snow removal and really dust...

My Boomer 30 has half the horsepower of that Deere, and my Woodmaxx 8H would have not problem with those 1.5” sticks that almost stalled the deer. It’s looks neat that you don’t have to trim off all the branches, but most of the pines, alders, birch and poplar branches I chip I can leave long...

My Boomer 30 is LS made with the Mitsubishi S4L engine. Manufacture year was 2011. I think it was only made until 2013. The LS made ones of those years were not available with a cab, but I think there are after market ones now. All the parts lookups have 1/2011 as the applicable time. I lost...

Are you using the tractor every day? I’d suggest only running it an hour or two each day before starting. But if you aren’t using the tractor every day, then I definitely would not keep it plugged in. My tractor’s block heaters use about 400w each, and at my electric rates, about $1.40/day...

Boomer 30 and 35 are in the same service manual so they should be pretty similar (S4L/S4L2 engines)

If the boomer 30 is similar enough, I can take pics of mine.

Having two makes a lot of tasks that require implement changes be a lot more efficient. With two sizes and open vs cab it lets me choose the right one for a job. I’ve had my Boomer 30 for a decade, but needed more horsepower and wanted a cab for snowblowing so I got an LS MT347. I still use...

Your friend sounds like a Garage Logic podcast fan. Their cylinder index is internal combustion cylinders both working and not. I think my cylinder index is around a pitiful 39 now. I was at my age a couple years ago before I sold off a few when I moved…and then I also got older.

Discharged batteries start to oxidize the lead plates. Leaving batteries discharged for extended periods is definitely bad. Single time and it was charged fairly quickly….may not be a certain death sentence.

That would be great, if it was an option. Minnesota state law requires between 5 and 20% biodiesel depending on time of year. I’m not aware of any exceptions for non biodiesel like we do for Non-oxy gasoline.

Could be possible that the nut has started backing off the piston shaft. I had one ram on my excavator do that. Rebuilding it will definitely tell you what’s wrong.

Like other say, they work on tension rather than compression. But while you are still thinking about your 3 pt, change those square head pins to one with a flat face. Those stupid square heads tend to rotate, grab, and then bend your stabilizer bar...

I upgraded to 5.25” speakers and the sound still sucked. Turns out that wiring harness or the installer bridged the front and rear speaker wires together. After I cut the wires to separate them and just use the front speaker wires, it sounds pretty good.

If it’s on the Hydrostatic version, touching the brake pedal releases it. Is the brake on just enough to trigger the sensor?

The Boomer 30/35/40/50 are the first LS made New Hollands I know of, and it was in 2010.

My MT347 came with 2 rear remotes, but I had them add a front remote for a future grapple, and will just either T that or have a set of couplers on it so I can swap with the front and have it pre-plumbed to the back as a third. I’m making the assumption I will only need the third function in...

A Fleet Farm, any farm store, and some auto parts stores like Napa should have a universal tractor trans hydraulic fluid compatible with 134. If you want something cold weather, amsoil has fn200 compatible and ships.

Yes, at least they were at the beginning of May.

Checked the parts lookup, and you have the 50X25TX623L drawbar, so 2 1/8” long shaft should fit fine.

Ball end hole is 1”. The pin holes are .80” They are actually metric so they are 26mm and 21mm Draw bar on my 2 series tractor is 25x50mm. On my MT347 it is 30x50mm. A 2” long shaft is just long enough for the 25mm. You will probably want one at least 2.5” long if you have a 30mm.

What year Boomer? The Boomer 30,35,40,50 from 2011 to about 2013 was made by LS Mtron but they used the Mitsubishi S4L 4 cylinder Diesel engine. I bought a 2011 Boomer 30. I forget the reasons they switched from the Japanese Shibaura to the Korean LS made in 2011, but it only lasted about 3...

It comes with one set of bushings if I remember right. But it still had to buy at least 7 more sets for the other attachments.

Looks like the same Speedo I have. You still want bushings though or you will have too much slop.

Neighbor had a machine shop, so we used his Bridgeport Mill to true them up and then made inserts. People that don't grease their **** shouldn't be allowed to operate it. I think my bucket is pretty tight after you put in the pin. You might be able to shim the bucket a little to tolerances are...

I bought an abused X about 5 years ago. The pins on your Green arrow piece were worn, so I had a local welding shop (recommended by the local Bobcat dealer) cut them off and welded new ones on. They even drilled it for the grease zerks. This went back together okay until I replaced all the...

Is a John Deere front end really that weak? I’ve had my New Holland boomer 30 almost 9 years now and it spends almost all its loader time in 4wd. If one dig into a pile destroys the front end, then I’m really glad the John Deere dealer I went to when I bought my cut wouldn’t give me the time...

Here are the service manual pages for the neutral safety switch.

My truck has been fine so far as well. And my 2012 made tractor seems to be fine except for the fuel cap. But the cap is fine until you remove it and it pops. Makes me wonder how many other seals are under compression between parts and degrading the same.

Minnesota introduced a state mandate of B5 to B20 depending on time of the year. How well is everyone coping? The gasket in the fuel cap on my New Holland Boomer 30 got warrantied the beginning of last summer, and I need a new one again this year since I started buying summer blend again...

This piece? Comes as an entire assembly. You can't order just the upper bar.

Can't say I have completely solved the issue, but I put in several food plots and spread a hundred yards of gravel with the box blade without bending anything else. There is invariably some slack in the rigid stabilizers. Assuming you have changed the pins so it doesn't bind when lifting, I...

I ended up having two things break or bend, depending on the thickness of the weld and the tolerances in the pins. On the left side, the stabilizer bar could not slide by the pin and it completely bent it ($80 assembly, bent part not available for order separately). On the right side, the...

Anyone else broken their stabilizer mounts for the 3pt hitch? I got the Boomer 30 (LS Made) in mid August and slightly bent the left stabilizer bar the first weekend I used it (with the tiller, as it was setup by the dealer). Being my first tractor, I assumed I must have done something wrong...