Search results

We may have a buyer for our JD 420/wide front. He is a collector. The rubber is excellent, it starts easily and runs well, does not burn oil. PTO brake does not work but the PTO does (2 stage clutch). The ignition needs work; it does not charge. It has Factory Power Steering. The tin is all...

Does anybody offer an after market Front Hyd. pump that is cheap and easy to install. I want to run front mounted skid steer attachments on my 5155.

Does anybody offer an after market Front Hyd. pump that is cheap and easy to install. I want to run front mounted skid steer attachments.

I read the manual and they recommend Kohler Pro 10W-50. So, I started searching and only find Kohler 10W-30. It looks like the Kohler ZT710-ZT740 motors all use the same filter. I find nothing in the manual about a part number for the filter, just that it takes 2 quarts of Pro 10W-50 oil. I...

Just picked it up yesterday. Read the so-called manual. Does not mention what oil to use, I understand there is a special oil for air cooled engines. What is it or will Rotella T4, T5,or T6 work just as well? How about Mobile 1 5-30? How about a number for the oil filter so I can cross...

My old M7030 is ozzing oil around the left front wheel (over the winter is leaked a +/- 1/4 pint). I am presuming a seal has failed. I have a shop manual and it doesn't mention replacing a seal. Is this a DIY project or is it a major job? One thing I haven't figures out is the zerk grease...

I am the normal hobby farmer. May only use the tractor once a week but then use it for 3-4 hours. Normal use is 500 hours per year. I am concerned about condensation in the crankcase and the hydraulic system from the heating and cooling. Will the use of synthetic(T5) or simi synthetic...

Almost new tractor and I don't believe the remotes have even been used. Went to hook them up and one female won't accept the male fitting. One works just as it is supposed to but the other one you can't get the male into it far enough for the detent balls to engage. It is definitely that...

I have a Landtrac 470 with a broken transmission. I understand the Landtrac was built by LG and marketed by Long Agri-Business and now LS can supply parts, at least that's what a LS Dealer told me. Is that information correct? I am trading this tractor to a family member and will buy the...

Trying to figure a honest price for my 7030/FEL. Tractor House doesn't have one listed. What is an honest price? 4K hours, everything works, tires 75%.

Looking at a 2022 Mahindra 5155 /<100 hrs. Is the 5155 made in Inda by Mahindra? Can owners give me the good, bad and ugly?

I am searching for a 45-55 HP tractor with FEL and, hopefully, a power shuttle for durability, new or used <2K hrs. Something like the Kubota M5040 (I have a 7030). In my search I have discovered most of the S. Korean tractors are a conglomeration of other manufactures parts. Some of the...

When I brush hog I want my mower running at 540 rpm. all the time. If I hit a heavy spot, I want to slow the ground speed down but leave the PTO at 540. I have to clutch and shift to a lower gear. Is it the same with the IHMT? If I understand correctly, you can remove the IHMT without...

Are these models considered Compact or Compact/Utility or Utility? I want to replace my tired 50hp Landtrac Compact. Must be open station and I would like power shuttle and wet clutch for durability. I understand these models have them. Price is a definite consideration, $30-40K with...

I am looking for an affordable 45-55 hp farm tractor with FEL. About 500 hours per year. Would like a wet clutch (for durability) with power shuttle (fwd and back without the clutch). I understand the Yanmar system is a high bred hydrostatic. Does it meet my requirements without the hydro...

After replacing a sync reverser and now have lost 2 gears I want a compact utility tractor with a wet clutch and power reverser. Don't want hydrostatic. Most of the Korean, Japanese and Indian tractors I have researched use a dry clutch and a sync reverser. Is there a specific brand that uses...

I have a Long Landtrac 470 with a Mitsubishi engine and transmission. Trans is 4 speed synchromesh, with high and low range and a creeper with high and low, so 16 speed with a synchromesh shuttle. The transmission will not shift into 1st or 2nd, 3rd and 4th work fine. It does not grind, just...

We looked at and played with the 1 ton mini's and decided we need and want something bigger. Something more stable with a bigger footprint. What is available in the 3 to 6 ton market? We want to move and dig a little faster. Bobcat, Kubota, John Deere, what's out there and how do the prices...

Was told the Mini I was looking at had a Lincoln motor. After research I think they were talking about the hydraulic motor, I couldn't find a Lincoln gas engine. I have only heard of the Briggs or the Chinese Honda knock off. Wondering if the Harbor Freight Predator would fit?

The mini's are so slow to move 1/4-1/2 mile. What have you fabricated to facilitate moving them? I was thinking a stone boat (sled) or maybe the FEL on my 70 hp tractor. Or maybe a simple trailer. What are the fertile minds using?

Do these 15 hp Excavators have the power, weight and ability to handle a tilt grade bucket for ditching and cleaning ditches?

My old Kubota 7030 remote hydraulics quit working after a couple of hours and it gets warm/hot. I am sure the pump is tired, but I priced them and looked at replacing. I guess not, almost looks like I may have to remove part of the FEL frame. So, we only use this tractor in the summer. Isn't...

I want a 60-70 hp 4wd Utility tractor. Something built a little heavier than the usual compact. Think I want a wet clutch too. What Kubota models should I look at? 15 years old max.

My fuel gauge works part of the time. Right now it is stuck on 1/2 tank. How much of a job to replace or repair? Or do I stick with the stick?

What did you do before putting Synthetic Rope on a Farmi type winch? I understand you have to polish all the pulleys and the drum so it doesn't snag. Is there a source of parts for the Farmi, our clutch is about shot.

My loader works off one set of remotes. So, when using the loader, I have to lock the remote lever back and, in that position, the 3-point hitch and the other remote doesn't work. I have been living with it but wish I could run the loader and the 3-point at the same time. This was discussed...

My Kubota 7030 with 4K hours is a hard starter. After much experimenting I have found that it I run it at 1000rpm before shutting it off and then don't touch the throttle. A week later I can run the glo plug for 10 or 20 seconds, depending on the weather, and it will start right up on the 2nd...

The 7030 is a Fiat tractor with Kubota parts. The left front hub is leaking (oil spot on floor) I checked the oil level by removing the fill plug, it's over full. On the top of the unit there is a zerk fitting and my Shop Manual and owners manual says nothing about greasing it. Shop Manual...

I have 3 lightly used implements that take 10 ft hydraulic hoses so I was going to make a universal hydraulic hose with a male on one end and female coupling the other and put a male fitting on the cylinder. I presumed the fittings were 1/2 npt. I removed the hose from the cylinder and my 1/2...

I keep thinking I need a rollover plow. Maybe a 2x16 or 2x18. Anybody got a "fence row queen"?

The spring tooth harrow type teeth on our cultimulcher are worn and uneven. Where do I find replacement (bolt on) points for them? I have been searching the Shoup site and must be using the wrong term.

Been working on the Hutch Master Rolling Plow. Have the new bearing in hand and the bushing is on the way. The bearing does not have identical sides, and the gang bearing housing is strange too, has cutouts opposite each other on the sides of the housing. The bearing does not drop into the...

Bought this disc and have identified it as a HutchMaster RPN8. ID Tag is damaged, the SN ends with 138 and it says ROYAL. I have found the owners manual for this disc on line and printed the pages. The discs on the leading edge of the front and trailing edge of the back gangs are broken and it...

Just acquired an offset disk with some broken blades, 22 inch. Where is the best place to buy replacements?

The loader Control on our Landtrac is sloppy, but still works. Could it be the linkage or will it be the valves? Will it be simpler/cheaper to replace the control or repair the valves? Is the control on a Landtrac going to be an orphan?

Looking for a dozer or snow blade with Euro Global Quicke hook up. 84 to 100 inch wide.

The generator isn't charging the battery, it could be a broken or loose wire. Or it could be the generator. Is there a simple way to check to see if the generator is charging? I am eclectically challenged, so please keep it simple. Bill

I have had this tractor for a year and it is temperamental to start. But, I have found that if I lower the rpm to 500 before shutting off, it will start instantly with no problem. But, yesterday, I started the tractor, backed it out of the shed, let it run for a minute and reduced the rpm's to...

Looking for somebody with experience working on this winch. I am thinking about renewing the clutch plate and would like to talk to somebody who has done it and can lead me to parts and point out the hidden problems. I do have the owners manual so I have the parts numbers. Bill [Reply]...

My new/old 7030 sometimes starts hard. I've thought starter not fast enough, bad battery, bad connections, bad glo plugs. BUT, the last few times I have tried to start the tractor I've left the throttle very low, about 500 rpm's, and it starts right up. Did I stupidly veer into the proper...

My 7030 is not the easiest starting. Usually have to grind for 10-15 seconds. I am getting no observed white smoke. My old Allis 6060 would billow white smoke before it started. Do I have something unusual happening? Bill

After reading the "Draft Control" thread I got to thinking that most, including me, don't know how to properly adjust a bottom plow, especially a 3 bottom. Are there any GOOD videos? I've got an AC 3 bottom 14 inch on my 7030 and it pulls hard and doesn't do a good job! Bill

My tractor battery has a parasitic drain that I can't find, so small it does not spark. If I get a battery maintainer and de-sulfator, will the de-sulfator work with the drain? I'll get one big enough to overcome the parasitic drain. Bill

My M7030 has idiot lights for oil pressure indicator. It doesn't work. I have found the end of the wire and the orifice where it is attached to the tractor. I am presuming it is just a pressure switch. Is there a way i can connect a regular oil pressure gauge to that orifice?

I have a Kubota 7030 with FEL. The loader works off one set of remotes, so when using it the three point and the other remotes won't work. Is that normal? In other words there is no way to use the loader and a back blade at the same time.

This is on a K-Mule that has given no problems. Have put a new battery in it. Turn ignition key and nothing happens, no click or light dimming, nothing! Jump across the solenoid and the starter motor runs but does not engage the engine. Looks as if we have a ignition switch problem and a...

Turn key to start and nothing happens. Jump across the solenoid and the starter runs but does not engage the motor. Machine has given no indication of a problem. Where do I start looking?

My tractors have "summer" blend in them. Which fuel anti-jell is best?

Where do I get a Service Manual for my M7030? manualslib does not list the 7030. The Owners Manual I got on e-bay, I don't' believe is a copy of the factory manual.

I have a Woods 8400 (7 foot) Finish mower with 3, 29 inch blades. Original equipment blades are $180.00, there have to be cheaper after market blades available. But where?

I need to add a step to my tractor. Does anybody make something that might work or do I fabricate one?

I have a Kubota 7030 with a Gravotek seat, I think it is aftermarket. The seat suspension and adjustment works fine but I need new cushions. The back looks simple 4 bolts but I can't find that bolt pattern, the seat is a different story and I don't understand exactly how it comes apart. Not...

I accidently ran over a block of wood with our $7000 Landpride rotary mower, didn't see it in the grass. PTO clutch did not slip and I broke the blade carrier. If we ever get it apart, the part is $350. And, until we get it running we won't know if anything else is broken or bent. Just...

I have found a small parasitic drain (short), so I looked at the fuse block and found a zip tie holding it together. Eureka moment! I'll bet that's where my drain (short) is. Off to the Kubota dealer to see if I can look at a parts picture and schematic to see what it is supposed to look...

I bought a rotary mower and the tractor end of the PTO shaft has disappeared and the replacement is too short. I have to make it about 30 inches longer. It is a Series 4, the 43.5x3.4 (outside) end. I have found the right sized tubing. How do I get the coupling end off the old shaft? Or is...

I just bought this tractor and the battery went flat. Looked around and I may have left the dash light on. So I charged the battery, it showed 12.8 volts on my multimeter. With the tractor running it still showed <13 volts. The multimeter did not indicate a short. Left it alone for a week...

I bought this used tractor and after using 10 gallons of fuel the battery is dead. The Owners Manual I have says nothing about the Alternator and little about the wiring. The only "Easy Checker" light that works is the Glo Plug light. I guess this should have alerted me to possible electrical...

Does anybody make a plain straight blade for the Quicke Euro-Global quick hitch? I know they make snow plows that hyd angle, but I am looking for a plain straight blade. A BACK BLADE FOR A FRONT LOADER.

I am about to buy a 7030 and the only fear I have is the clutch. How much can I expect to pay to have the clutch replaced? It has a FEL and here is no shuttle, so I am presuming it has been shifted alot in 4000 hours.

Other than 20hp what are the major differences? They seem to be about the same size and the tires could be the same size too. thanks, Bill

This tractor has <4000 hrs and I have not looked at it yet. I believe it has a 16 speed trans/ 4 reverse and no shuttle, it is beast to load with? Looking for somebody with experience with this tractor. What are the weak spots?

Haven't looked at either tractor yet. Kubota is older and has <4000 hrs, the Mahindra has <1000 hrs and is more money. Both have loaders. Tractor will be used about 300 hrs per year for mowing and light tillage. (3 bottom 14 inch plows) I like the 16 speed trans, but not sure it has a...

Has anybody even seen a XU model? Let alone bought or tried one out? They call it a Utility, but I fear it is nothing but a compact with a big engine, not a real farm tractor.

Since I can't fine a decent used 65-75hp 4wd, I am testing the waters. Tell me why a MT5 73hp is better than a XU 68hp? I prefer an open station, but not impressed with the 16.9x24 rears on the XU 68 hp tractor. They call the XU a "Utility" tractor, but is it really a "compact"? From the...

So, I finelly looked at this 7520 and am pleased with it except for the brakes. Seems somebody set the hand brake, which just locks the foot pedals, and drove it. There are brakes to both rears but the pedal is soft and low. Is there a way to adjust the brake pedal travel and what are the...

The XU is the biggest Open Station LS Tractor? And it only has 24 inch tires? Is that correct?

I have a Long LandTrac 4700, has a Mitsubishi 4cyl diesel and a Mitsubishi tranmission. I understand they were about the same as the Montana and now the LS. Any way to check the history of LS? I have been happy with the tractor but it is getting hard to get parts, just wonder if any will...

Tell me a little about the Mahindra 7520/Loader. Will it have a power shuttle or do you have to use the clutch? 12 speeds, so is it a 4 speed trans and 3 speed transfer case? Durable? Does 1200 hours mean worn out or just broken in? Is there any pollution control on the Mahindra 7520? How...

Back in the market for a new tractor. Need 55-70 HP, open station, loader and a power shuttle would be nice. I have looked at the 6530 and it seems like a good utility tractor. Is there something better out there? I do not want a "compact", must be a utility and have planetary front...