Zork's latest activity

Root/ Frost ripper on custom quick attach that mates to the KX40 excavator tools and a few stumps. Stump with huge tape root was 24"...

For those with a backhoe and a desire to tackle stumps from time to time, you might try a rock ripper with a sharpened edge to slice...

Absolutely. Must have the subframe. Never use a 3 point only mounted backhoe unless you want to break your tractor in half.

While a mini ex would be ideal, I picked up my used LS with a hoe. Hardly ever comes off, great counter weight for the heavy lifting...

We picked up a backhoe (BH) when the tractor was purchased and have not regretted it at all. A subframe mount is a necessity to protect...

First test with the new to me plow. No adjustments made whatsoever and the ground is very dry and hard for this but still fairly...

Subscribed, because I've never heard of such a thing - which positively isn't to say it isn't! that's why I'm following! Is this...

If a pole saw is big enough for the trail work, a Deere 3039 is big enough ;)

Here is the trailer and on Friday I plan to grab this tractor again (lower photo) and move it to trails as I did 2 years ago.

I would say yes; post here if you have a nifty trick, specific tool, technique or method that works well, especially if holding your...

We just picked up a 20ft trailer and as some of you know, looking at used JD and Kubota tractors for trail work. Should I be posting...

Snow plow oil and brake fluid has a water absorber in it that becomes saturated over time as plastic isn't a perfect vapour barrier but...

Here is one photo of my trails, I used a box scrape without tines to pluck saplings about 2” like a hair; it worked really well. Over 28...

Any updates to this? Any updates to this?

With the potential for limb deadfall, a hard had might be worn and might help against a spinal compression injury that could leave one...