oldnslo's latest activity

So, surging etc. after it has run for 5 minutes? A real simple thing to try is get a few feet of 1/4" fuel line. Drop one end into a...

Try easy thing first and change spark plugs. Possible that they are carboned up from running rich due to plugged air filter. Engine...

Lhf A little history that you may or may not know on those Eaton valves Original company was Modular Controls based in Carol Stream...

I suspect that the original valves have proprietary John Deere part numbers on them which makes identifying and crossing them over...

Not that I recall but memory isn’t what it used to be either.

Weight wise yes power wise you might be border line for 6-8” material.

Bravo, Deere had some problems with older 316, 317, 318 era tractors where wheel weights were added and tractor was used in area with...

Ex = has been Spurt = drip under pressure I kinda resemble that remark😂

What size tractor will you be using on the chipper? Like GS stated a 6” log of any length especially with branches is a handful to move...

Thanks oldnslo, there are grease nipples, so I've been using the JD Multi-Purpose synthetic Grease - TY25744, seems to hold out better...

I never use anything for last 20+ years. Been towing all my life. Found that when I used something, it just attracted dirt.

There should be little to no pressure on the back side of that shaft seal. If oil is squirting out I would suspect there are problems...

Lhf Those look like standard cavity valves so Delta Power, HydraForce, Parker valves should interchange if you know what the valves are...

Normal hydraulic oil temperature should be in the 140 - 180 degrees F depending on how hard you are working the hydraulics...

Can you give us more details on how is this valve connected to the rest of the system?