oldnslo's latest activity

You might be able to put a vise grip on the input shaft and spin it. Not sure how your HST is built since some have external charge...

TYM could be purchasing the HST pump and motor to be installed in their transaxle housing. If this is the case you probably would not...

Not positive but suspect they are sourced from an outside manufacturer. A possible source is Kanzaki Transmissions or a similar company.

A possible option is to add some fluorescent die that is visible via a black light. If like my Branson 2400H it is indeed difficult to...

If like my 2400H Branson yes it would. If you restrict the arms from lowering the mid mount deck will not lower. Normally you don’t need...

American $1 bills? Nah, I'll load him up with Iranian currency (cheapest in the world). 13 yards should be about $16,000 USD. Which...

Greedy no, just opportunistic and willing to help someone in need.

Is this a rough cut mower or a finish mower? We don’t know how the mower is configured. Is it set appropriately level front to back so...

Heat can but typically temperature would have to be 250 degrees F or higher before the O-rings would be affected. Engine temperature...

If PTO noise is the main concern have you tried isolating different parts of the system to see noise shows up. 1) Run PTO without the...

In looking at the top view of the mower deck I am questioning the long spring running from idler arm to hook on front of the deck. Does...

When you are trying to mow with the 10 ft mower at your desired travel speed what is the RPM of engine vs not moving? What color is the...

I have a slightly different take. While I won't disagree with anything stated so far, one part of your original post has yet to be...

Kubota is known for building lighter tractors than other brands in similar HP range. I am not sure were all the weight difference comes...

Does the grass in those brown areas feel loose and lift up? Have you taken a shovel and carefully peeled back the sod and looked for grubs?