number two's latest activity
-
Nnumber two reacted to LHF2019's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
I can't like that one enough. No comparison and no other grease has ever been used on this farm going back to my Grandfather. One grease... -
Nnumber two reacted to zzvyb6's post in the thread Gas Caddy VEVOR (style/type). Who has one? Buy Again? with Good Post.
In my humble experience, you should consider having TWO fuel dispensers because you are likely to be facing TWO empty tanks: the mower...
-
NGive that man a "Good Post" for a correct answer. I will however ask why you would even consider I have a poor understanding of the...
-
NWhere this should take the thread is towards the conclusion that you are either being mischievous ;) or that you have a poor...
-
Nnumber two reacted to Mtsoxfan's post in the thread Does any one strain their diesel? with Good Post.
I used to use a Mr. funnel, but never caught anything. I have since stopped using it. Never saw anything in any of my fuel filters...
-
Nnumber two reacted to BnRidge's post in the thread Does any one strain their diesel? with Good Post.
We have a zero turn Deere F935, 1986, that has used fuel straight from the can it's entire life, two tanks, one or the other is always...
-
Nnumber two reacted to ponytug's post in the thread Does any one strain their diesel? with Good Post.
If it were me, I'd spend some time tracking down the origin of the powder. I'd start by cleaning my transport container, and then buying...
-
Nnumber two reacted to bdhsfz6's post in the thread Does any one strain their diesel? with Good Post.
My diesel is filtered twice. First using a 10 micron filter on my bulk tank, which I use to fill a portable tank. That one is equipped...
-
NI've gone to 2 100 gal tanks with 12V pumps, each with built-in filter cartridges. I can't lift the 5 gallon containers comfortably any...
-
NWell I only read the first 10 pages of this thread. Bought my first No Spill Gas Can about 10 years ago but after owning the first one...
-
Nnumber two reacted to newbury's post in the thread How much ballast for a 40hp machine (TC40DA) with Good Post.
Get a good 6' flail mower and keep it on.
-
Nnumber two reacted to jonsstihl's post in the thread How much ballast for a 40hp machine (TC40DA) with Good Post.
any ballast on the rear is better than none, someone already mentioned it but your hydraulics are individually actuated, you can lift...
-
Nnumber two reacted to SPYDERLK's post in the thread How much ballast for a 40hp machine (TC40DA) with Good Post.
If you have a bushog put it on semi permanent. Theres 600#+ and leverage. Add some weight on top of deck when you need it. Weight on the...
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
Something a little different today. This is a root pruning machine. We use it on golf courses to prune the tree roots along the fairways...
-
NI do the same. 3 gallons in the 5 gallon can. Partially for weight, partially so I can tip it over farther before fuel flows out the nozzle.