number two's latest activity
-
NI wuz gonna say - there is no federal law saying you MUST put 5 gallons in a 5 gal jug... Instant 3 gal jug!😁
-
NNone of ours have funnels. We ordered ones with flexible spouts.
-
N"I really disliked lifting the 5 gal of diesel" I agree. Amazing that I can't find 3-gallon Diesel cans even though they make 3-gallon...
-
Nnumber two reacted to Fuddyduddy1952's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
Here's what I do, and it's normally after a shower and clean clothes: step 1 is squirt some out and rub it all over my face, hands... -
Nnumber two reacted to ultrarunner's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Rubber caps will keep the zerks clean…
-
Nnumber two reacted to dbritt's post in the thread How about a grease cartridge thread? with Good Post.
The only info you need in selecting grease is the number of adjectives in the description. The more words like Ultra, Heavy Duty...
-
Nnumber two reacted to Chiefwebb's post in the thread How about a grease cartridge thread? with Good Post.
I use the Lock-n-lube G-Gun with their locking coupler. Bulk fill the hopper. Foot pedal sends the grease under high pressure. Lift up...
-
Nnumber two reacted to joea99's post in the thread How about a grease cartridge thread? with Good Post.
Not cheap.
-
Nnumber two reacted to manzer7's post in the thread How about a grease cartridge thread? with Good Post.
I sold some TRC greases and oil - (Very Long-Lasting product AND it's been around since 1922). I had to quit since farmers around here...
-
Nnumber two reacted to TugHillDog's post in the thread How about a grease cartridge thread? with Good Post.
Red grease. Trouble is that where does it squish out to and is there a danger of blowing seals with too much grease? My wife has had...
-
Nnumber two reacted to tjandrews's post in the thread How about a grease cartridge thread? with Good Post.
At 76, I sometimes think that I should have one of my doctors install a zerk on each knee. Then I could give them a couple of shots each...
-
Nnumber two reacted to boatmoter's post in the thread How about a grease cartridge thread? with Good Post.
I use mobile one synthetic grease or sometimes marine grease, it stays on even if it goes underwater. I use a hand pump grease gun I...
-
Nnumber two reacted to azbinder's post in the thread 2014 BX1870 Steering Frame Broke with Good Post.
This is a cast material. Probably aluminum. Not sure how hard it would be to weld them back together. Items 40 & 70...
-
NEagle cans are galvanized. We used some for over 15 years.
-
NMy first gas can was galvanized steel and lasted less than a dozen years before I had to replace it due to a leak from rust. I'm...