number two's latest activity
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with
Good Post.
Been working on a 59 acre planted pine parcel, lots of downed trees from last year's hurricanes, so that slows me down a little. I had... -
NIn the old days they were generally square shafts that could be put together wrong. These days, most will only go together one way...
-
NBeing a 6 spline, 360 divided by 6 = 60 degrees. divided by 2=30 degrees.. and one spline can never be more than 1/2 off from...
-
NFunny how I think of this thread everytime I hook up an implement now...
-
Nnumber two reacted to 3930dave's post in the thread Your last generator Maintenance Run with Good Post.
Murph, again. I understand preferring PV, off-grid. That said, do you usually not stock gasoline ? Rgds, D.
-
Nnumber two reacted to 3930dave's post in the thread Your last generator Maintenance Run with Good Post.
2 is One, One, none ! Rgds, D.
-
Nnumber two reacted to daugen's post in the thread Your last generator Maintenance Run with Good Post.
since it was 111 degrees when i took my motorhome through Desert Center CA last Fall, I can't imagine you being out of power and a/c in...
-
Nnumber two reacted to ruffdog's post in the thread Bercomac SSQA snowblower experiences with Good Post.
That is the same reason I need to plow BEFORE driving on the packable snow.
-
Nnumber two reacted to LouNY's post in the thread Bercomac SSQA snowblower experiences with Good Post.
I've used my inverted pull type in 30 inches of snow fall. No problems and it doesn't leave any packed tire tracks behind me.
-
Nnumber two reacted to shooterdon's post in the thread Bercomac SSQA snowblower experiences with Good Post.
I used my pull blower on 10” and it worked very well. I have a gravel drive and getting down to “pavement” is not a good outcome...
-
Nnumber two reacted to leonz's post in the thread Bercomac SSQA snowblower experiences with Good Post.
A Rammy 155 commercial single stage snow thrower for the Kawasaki mule and V bar carbide ice chains for the kawasaki mule. I grew up...
-
Nnumber two reacted to shooterdon's post in the thread Bercomac SSQA snowblower experiences with Good Post.
I recently sold my pull (inverted) blower but it worked well. They are not cheap, but it sure beats a front blower and the nightmare of...
-
Nnumber two reacted to RjCorazza's post in the thread Bercomac SSQA snowblower experiences with Good Post.
In a perfect world, I would have a inverted blower. I make due with a regular rear mount blower with hydraulic rotation and deflection...
-
Nnumber two reacted to fishhead's post in the thread Bercomac SSQA snowblower experiences with Good Post.
There's always a rear pull blower- mounts on the 3ph but you drive forward- many members have them. I have beeb using one since , i...
-
Nnumber two reacted to glenintenn's post in the thread Kubota 36HP 4 cyl oil plug falls out with Good Post.
Got one of these. They're expandable from 1-1/8 to 1-1/4" - Tractor Supply has a similar make and their web info says they're heat...