kennyd's latest activity
-
kennyd reacted to tacticalturnip's post in the thread Quick Hitches A new month, a new Quick-Hitch thread. with
Good Post.
I can't justify the $400 an iMatch commands. I'm trying to find middle-ground between Titan/Amazon and iMatch, but on GTT @kennyd even... -
@kennyd of Ken's Bolt on Hooks fame, I believe sells a pressure gauge with the hose and fittings to fit ... That's where I got mine ...
-
kennyd replied to the thread 2011 John Deere 2520.Well don't know who told you that...but no. It is for snow, not dirt work as the name 'dozer blade' would imply. Guess you didn't...
-
kennyd replied to the thread open hydraulics.They will NOT work well with hydro fluid, they are meant for fuel that is much thinner.
-
kennyd replied to the thread 2011 John Deere 2520.JD sold a 54" blade for that machine, but there are longer ones available like these...
-
kennyd replied to the thread Hydraulic AG couplers and heat.Sorry, I have only checked 1/4" and 1/2" ISO 5675 "AG" style so far. Not sure what your particular Kioti might use, but many of the...
-
kennyd reacted to HobbleCreek's post in the thread 4720 - Quit while spraying - Now nothing. with Good Post.
I'll go ahead and share what happened, just so the next guy can say to himself, "Well, at least I didn't do that!" I use the tractor...
-
kennyd reacted to dicktill's post in the thread How Massey Ferguson GC 1723 & 1725 hydraulics are plumbed with Good Post.
Here are the revised schematics, with and without a backhoe. I have updated some of the line fonts, made a few changes to (hopefully)...
-
kennyd replied to the thread 4720 - Quit while spraying - Now nothing..The 4x10 and 4x20 series do not have them. Neither do the 3x10 or 3x20's. Only the xx00 series have them. Plus, that won't stop it...
-
kennyd replied to the thread Hydraulic AG couplers and heat.You can try these: For 1/2" ISO 5675 "AG" style couplers: Size = 117 Durometer = 70A Material = Buna N
-
kennyd reacted to dicktill's post in the thread What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY with Good Post.
Thank you very much @kennyd! That is a huge compliment coming from as experienced a mechanic/manufacturer/guru (and fellow OCD guy) as...
-
kennyd replied to the thread What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY.Fantastic job @dicktill , that sure came out nice!
-
kennyd reacted to dicktill's post in the thread What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY with Good Post.
Here's what the rear remotes look like. The rest of the huge bracket will be used for a toolbox, carrying spares, and signage (need to...
-
kennyd reacted to Shawn T. W.'s post in the thread What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY with Good Post.
WOW Dick! 😲 That's quite the set up! I put My Little Baby Fergie to work today started out with the brush hog and cleared the "future...
-
kennyd reacted to dicktill's post in the thread What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY with Good Post.
After lots of work, I finally have my "rear remotes & 3-point valve" operational. It is a 5-spools Bucher valve. Four spools are hooked...