K5lwq's latest activity
-
K5lwq replied to the thread Parts for Kutje A2300N2-ATC the same as Cummings A2300?.I would suggest sticking with TYM for the gasket and make sure they have your serial number. Some of the gaskets will look similar and... -
K5lwq reacted to ptsg's post in the thread Parts for Kutje A2300N2-ATC the same as Cummings A2300? with
Good Post.
You're definitely not the first one to ask. It's actually fairly common question. Fairly legit too given how similar the engines are... -
K5lwq reacted to LouNY's post in the thread Parts for Kutje A2300N2-ATC the same as Cummings A2300? with Good Post.
I don't under stand how pumping the "gas" pedal is doing anything. It does not have an accelerator pump as a carbureted gas engine would...
-
K5lwq reacted to ptsg's post in the thread Parts for Kutje A2300N2-ATC the same as Cummings A2300? with Good Post.
This is one of those things where one will only know for sure if one is willing to spend the money on getting the parts need for a...
-
K5lwq reacted to FMFProperties's post in the thread Troubleshooting Kutje A2300N2-ATC : hard to start and overheating with Good Post.
It overheated in the first place because for years I would use the water hose and not compressed air, thinking water cleans better. I...
-
K5lwq reacted to LouNY's post in the thread Troubleshooting Kutje A2300N2-ATC : hard to start and overheating with Good Post.
Also a compression test and or leakdown test will tell you a lot. Hard starting would make tend to believe that you have low...
-
K5lwq replied to the thread Troubleshooting Kutje A2300N2-ATC : hard to start and overheating.The first thing to determine is why it overheated in the first place. I suspect the radiator fins need to be cleaned. Do you blow it out...
-
Today's seat time was getting my fire fighting kit all ready to go. This new to me trailer allows me to carry another IBC and still have...
-
Need to fix the AC for her :)
-
K5lwq replied to the thread MIL symbol came on along with the RFD symbol..Might try this process posted in another thread.
-
-
K5lwq replied to the thread LK2554 Help with pto shaft repair.Have you tried both speeds? Is this tractor new to you? I have never broke the shaft on mine but I did replace the rear seal so I have...
-
Maybe so.. did just fine today. Put together with stainless steel machine bolts vs glued. If it eventually fails I’ll get a metal frame...
-
K5lwq reacted to Richard's post in the thread Hydraulic (flexwing mower) question... with Good Post.
Not to continue this thread which has reached its end (as I continue a comment) I was scratching my head why I had that extra "end...
-
K5lwq reacted to oldnslo's post in the thread Hydraulic (flexwing mower) question... with Good Post.
Good job on diagnosing the problem(s). I suspect the “blind” cavity has radius on the machined corners and requires the rounded or...
-
K5lwq reacted to Richard's post in the thread Hydraulic (flexwing mower) question... with Good Post.
Ok, well....here comes the update. If you want blow by blow, keep reading. If you want "just the facts mam", I figured it out. The...
