K5lwq's latest activity
-
K5lwq replied to the thread Beaver 370D Brush Hog.Finding one is going to be difficult and expensive. I have one on my Beaver but was lucky it had the reverser when I bought it. I don’t... -
Here are some pictures with no loader and tires set to max width.
-
On mine, it's a very nice and firm shift but the shuttle lever is as simple as it gets and pretty much a straight shot right to the...
-
K5lwq reacted to CloverKnollFarms's post in the thread What have you done to your Branson today? with
Good Post.
Worked it -
Check some videos about how the Fendt Vario transmission works. The i-HMT is a scaled down version of it. Yes, the hydrostatic pump...
-
K5lwq replied to the thread Need advice on a machine to manage timberland.This is a very challenging situation and I would imagine the most challenging part is the family members. How involved are they in this...
-
K5lwq reacted to CoyPatton's post in the thread Need advice on a machine to manage timberland with Good Post.
In my opinion and limited timber experience, you need several pieces of equipment. 1) a tractor, to mow and maintain existing roads...
-
K5lwq reacted to Suburban Plowboy's post in the thread $10K L5030 Plus Restoration, or $25K Newer Tractor With Perilous Electronics? with Good Post.
The idea of running a tractor at very high RPM's to help the environment IS nutty. And it comes from the same people who want us to...
-
K5lwq reacted to ptsg's post in the thread TYM 574 power beyond rear remote w/backhoe with Good Post.
That's not correct and will damage the hydraulic pumps over time. Running it like that, is forcing all the fluid at max pressure...
-
K5lwq replied to the thread TYM 574 power beyond rear remote w/backhoe.It probably would be better to start a new thread with your question so that in the future people with similar issues might find it...
-
I dug out my old Tony Lamas. Still looks good for 60 years old.
-
I got the BCRM-155 last year. That's what I paid for mine new and shipped to my driveway. It may have been a couple of hundred less, I...
-
I cut the old bored slug (pivot) off the damaged section and welded it to the new tubing. Cleaned the bushings this morning applied...
-
Well making progress on my flail mowers beam; Working on the side gussets......................................done Getting it...
-
I just ran the speed test on mine after the relocation; 333 Mbps down, 28 Mbps up with a latency of 26 ms.