Recent content by GPintheMitten

Ok. I went out and looked at and took some pictures. I had forgotten that one of the ratchet handles got bent. I probably ran over it. It might work or might have to be replaced. You would also need to supply the 2 clevis links. Let me know if you are interested. Edit: JohnThomas, you could...

It is SLOW! Got 2 gateway timeouts and several times did get a response but took a long time. Other sites working ok so I think it is on TBN's end.

My daughter and son-in-law have a 40 acre horse farm and have been getting by (barely) with a BX2670 (I think) with a very small loader. I have often brought my B2620 including the BH65 backhoe to her place to help. Moving gravel, feed, manure and brush hogging is a pain (literally) with this...

On my Kubota B2620, I broke the left front hub. I don't know what exactly caused the failure but nothing a thousand dollars can't fix.

I've noticed several threads that have had some pretty cranky bickering lately. Didn't seem to have much to help the OP. Are we getting cabin fever already?

I hooked up my son in law's snow plow which I fabbed up a month ago. I'm going to declare victory on this project. Later this week I'll weld the quick attach plate to the bucket.

Forgot the pics

Working on it. Cut the 2x2 tube back. Welded in a 2" x 5/8" bar under the the plate and bridged to the 2x2. Got one done. I'll weld up the other side tomorrow. It was a royal pain tho cut that darn tube off.

Here's a close up. I can't see the pin hole.

Picture of radiator. The engine is cold and not running so no leak in the pictures.

I have a pin hole leak near the top of my radiator on my Kubota B2620. The top of the radiator, where the leak is, is some sort of plastic. Do you think if I drill it out to about 1/8" and put in some JB Weld, would it hold?

I'm going to convert my pin on bucket to SSQA. Just ordered a plate and conversion quick attach from Titan. Will post back when parts come in I'm going to cut the pin on ears out of my bucket. The plate will cover the rectangular holes. Here's the parts I ordered Pin On to Skid Steer Quick...

I am almost done fabbing a SSQA mount for my soninlaw 's fel. He has a 40 HP LS. The paints drying on the mount. Now I'm looking at nice fresh black paint on the mount, and the blade looks pretty sad. It's an old Western and is faded peeling powder coat. Will it work to sand the rusted spots...

Update -- it's been 2 weeks since this happened. They tooknow the stitches out a couple days ago. The doctor said it is healing nicely. There is still no feeling north of the cut but he said it will likely gradually return but not totally to the tip. No more medical followup is necessary. All...

Well it happened to me last night. I ripped a 2 foot 1 x 4. After the cut, I started to gingerly slide each piece back toward me being cautious. The problem was I had a marker pen in my left palm sticking out. The pen hit the blade and pulled my thumb into the blade. It didn't get...