dicktill's latest activity

They are right at the front of the transmission section, pages 05-3 to 05-6. Probably some photos later on. Good luck!

If it sticks, I just tip it upside down and just tap it on the ground ... Gets "most" of it out ... One thing to be aware of...

That's a good idea. You can pull the relief valves out without taking the hydrostatic apart or removing it from the tractor.

Were you trying to drive forward under heavy load when this problem occurred? If yes I would suspect the forward high pressure relief...

I agree with @thclimer that it doesn't look good, but have you checked the fluid level?

I underwent a third operation on my poorly healing bones. Hopefully this much hardware will allow what bones remaining to fuse. My leg...

You can either tap into (not tee into) the yellow line from the GC's loader valve to the backhoe (the line from the GC's loader valve...

Welcome aboard. Couldn't find that model but Brand makes some great valves. The only requirement is that it has "power beyond" and the...

I don't know your machine but I'd lean to disagreeing with that logic. Literally, about 3 days ago, I noticed a slow drip from my...

I believe he said in one movie: "There is a time for laughing and a time for not laughing and this is not one of them".

Alan Arkin 89 https://en.wikipedia.org/wiki/Alan_Arkin

Thanks again to all for the replies. I was able to get the bearing out using a 3 arm puller I modified to wedge between the races...it...

To perform a paper towel test for fuel in oil, place a drop of used engine oil onto a white paper towel or chromatography paper...

With eBay, the status updates to shipped when the seller prints the address label. That doesn't mean its in route. Most small companies...

One 'Atta-Boy' for BatteryCables! I resent companies claiming Shipped as soon a they get an order. Obviously, they are trying to get...