Cycledude's latest activity

With the additional benefit that you will then immediately find the one that you lost.

I also jacked up the rear to check pressure. The right side which was an inch higher than the left due to the ground and FEL contact...

None of the tires on my tractor have inflation pressures. Could it be foaming?

So it’s different for front or back is the way I was taught. Fronts just max out pressure if using a FEL. Rears get your heaviest...

I'd probably go with about 30 psi front and 15 rear.

I have 15 in my rears and want to go lower but am afraid to. I really want radials for the rear.

I don't believe if having the rear tires filled makes any difference, but I have my rears set at 14 psi. I use a small black paint...

Good idea, I have a couple 5'-6' rock bars.

I use a drill rod that is about 5 feet long as a lever to move my brush cutter into final position for hookup to the 3pt hitch. Parking...

It wasn't a race, it just went really smooth. Um...ya think? Do you know the difference between a tractor and a plane? :unsure:

No dolly for mine. Can you post a picture?

Hmmmm....I never thought that hitching up a tool to another tool was a race against time. Taking the time to make sure that everything...

I have found that if I lube the splines on the PTO shaft, as well as the shaft locking component--be it a collet or a pin-locking...

Congratulations! Do you have it on a dolly? I made one for mine and it's made connecting it much faster and easier. It's easier to...

You were on the right track - I put in a fuel pump between the filter and the injection pump and that fixed it! A friend who is a diesel...