Recent content by bmw63

yes

update-- I found the leak- tiny pinhole about inch and half in from edge of tread, had about 45 lbs air in tire just the tiniest bubble showing. next challenge - see if I can patch it !!

stumped on this one,maybe some can help. rear tire on my 2305, slow leak- about 3 days to become obvious tire is low, I've taken tire off tractor, squirting soapy water on tread while rolling slowly- reading glasses on,and flashlight on tire, no bubbles ! have also laid on sides checking bead...

I built me a dump trailer - cylinder fed from tractor hydraulics, tailgate latch operated by a 12 volt linear actuator, fed by a toggle switch on the dash. bmw

found a set of 36" forks,for a reasonable price, so I had to build a frame to attach them to the 200cx. before I paint it, is there anything I should add to the frame, that I haven't thought of ? I hope these pictures work, I've never posted pics here before...

anybody ever try some small lights- i'm thinking the 2 1/2 inch piaa driving lights for aux. lighting on there tractor? bmw:)

I can't remember,where I saw a picture , it was either on MTF, or TBN, a guy had a "nose art" type pic. on the side cover of a JD. I am frustrated I can't find it. ARGH !!! thanks, brent:confused:

one more question, as I prepare to add an additional valve to my tractor. am I correct in assuming it is ok for the valve to have a higher gpm, than the tractor system, i.e. it will still work,and not restrict anything, and the relief pressure should be the same as existing system ...

I want to add a valve to my 2305. generally it will operate a single acting cylinder,but I may add a double acting cylinder attachment later. will a double acting valve work to operate the single acting cylinder,or do I have to add 2 valves? brent

does anybody know what the pressure and g.p.m. of the 2305 hydraulic system is? thanks, brent:)